[Qemu-devel] [PATCH v3 06/15] do not pass bogus $(SRC_PATH) include paths to cc during configure

[Paolo Bonzini]

Non-existent -I paths are dropped silently by the compiler, but still
it is not polite to pass bogus options.  Configure-time tests do not
need any include files from the source path, so only include -I flags
at make time (when they're properly expanded).

Signed-off-by: Paolo Bonzini <address@hidden>
---
 configure      |   19 +++++++++++--------
 rules.mak      |    6 +++---
 tests/Makefile |    3 ++-
 3 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/configure b/configure
index 93b5765..d5ae996 100755
--- a/configure
+++ b/configure
@@ -217,7 +217,7 @@ QEMU_CFLAGS="-Wall -Wundef -Wendif-labels -Wwrite-strings 
-Wmissing-prototypes $
 QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
 QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE 
$QEMU_CFLAGS"
 QEMU_CFLAGS="-D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
-QEMU_CFLAGS="-I. -I\$(SRC_PATH) $QEMU_CFLAGS"
+QEMU_INCLUDES="-I. -I\$(SRC_PATH)"
 LDFLAGS="-g $LDFLAGS"
 
 check_define() {
@@ -2513,7 +2513,7 @@ if test $profiler = "yes" ; then
 fi
 if test "$slirp" = "yes" ; then
   echo "CONFIG_SLIRP=y" >> $config_host_mak
-  QEMU_CFLAGS="-I\$(SRC_PATH)/slirp $QEMU_CFLAGS"
+  QEMU_INCLUDES="-I\$(SRC_PATH)/slirp $QEMU_INCLUDES"
 fi
 if test "$vde" = "yes" ; then
   echo "CONFIG_VDE=y" >> $config_host_mak
@@ -2743,6 +2743,7 @@ echo "LD=$ld" >> $config_host_mak
 echo "WINDRES=$windres" >> $config_host_mak
 echo "CFLAGS=$CFLAGS" >> $config_host_mak
 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
+echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
 if test "$sparse" = "yes" ; then
   echo "CC           := REAL_CC=\"\$(CC)\" cgcc"       >> $config_host_mak
   echo "HOST_CC      := REAL_CC=\"\$(HOST_CC)\" cgcc"  >> $config_host_mak
@@ -3051,19 +3052,20 @@ fi
 # generate QEMU_CFLAGS/LDFLAGS for targets
 
 cflags=""
+includes=""
 ldflags=""
 
 if test "$ARCH" = "sparc64" ; then
-  cflags="-I\$(SRC_PATH)/tcg/sparc $cflags"
+  includes="-I\$(SRC_PATH)/tcg/sparc $includes"
 elif test "$ARCH" = "s390x" ; then
-  cflags="-I\$(SRC_PATH)/tcg/s390 $cflags"
+  includes="-I\$(SRC_PATH)/tcg/s390 $includes"
 elif test "$ARCH" = "x86_64" ; then
-  cflags="-I\$(SRC_PATH)/tcg/i386 $cflags"
+  includes="-I\$(SRC_PATH)/tcg/i386 $includes"
 else
-  cflags="-I\$(SRC_PATH)/tcg/\$(ARCH) $cflags"
+  includes="-I\$(SRC_PATH)/tcg/\$(ARCH) $includes"
 fi
-cflags="-I\$(SRC_PATH)/tcg $cflags"
-cflags="-I\$(SRC_PATH)/fpu $cflags"
+includes="-I\$(SRC_PATH)/tcg $includes"
+includes="-I\$(SRC_PATH)/fpu $includes"
 
 if test "$target_user_only" = "yes" ; then
     libdis_config_mak=libdis-user/config.mak
@@ -3188,6 +3190,7 @@ fi
 
 echo "LDFLAGS+=$ldflags" >> $config_target_mak
 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
+echo "QEMU_INCLUDES+=$includes" >> $config_target_mak
 
 done # for target in $targets
 
diff --git a/rules.mak b/rules.mak
index 6dac777..738eec3 100644
--- a/rules.mak
+++ b/rules.mak
@@ -15,13 +15,13 @@ MAKEFLAGS += -rR
 QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(*D)/$(*F).d
 
 %.o: %.c
-       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c 
-o $@ $<,"  CC    $(TARGET_DIR)$@")
+       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_INCLUDES) 
$(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<,"  CC    $(TARGET_DIR)$@")
 
 %.o: %.S
-       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c 
-o $@ $<,"  AS    $(TARGET_DIR)$@")
+       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_INCLUDES) 
$(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<,"  AS    $(TARGET_DIR)$@")
 
 %.o: %.m
-       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_DGFLAGS) $(CFLAGS) -c 
-o $@ $<,"  OBJC  $(TARGET_DIR)$@")
+       $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(QEMU_INCLUDES) 
$(QEMU_DGFLAGS) $(CFLAGS) -c -o $@ $<,"  OBJC  $(TARGET_DIR)$@")
 
 LINK = $(call quiet-command,$(CC) $(QEMU_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ 
$(1) $(LIBS),"  LINK  $(TARGET_DIR)$@")
 
diff --git a/tests/Makefile b/tests/Makefile
index e43ec70..9ded4b7 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -7,7 +7,8 @@ QEMU=../i386-linux-user/qemu-i386
 QEMU_X86_64=../x86_64-linux-user/qemu-x86_64
 CC_X86_64=$(CC_I386) -m64
 
-CFLAGS=-Wall -O2 -g -fno-strict-aliasing -I..
+QEMU_INCLUDES += -I..
+CFLAGS=-Wall -O2 -g -fno-strict-aliasing
 #CFLAGS+=-msse2
 LDFLAGS=
 
-- 
1.7.3.2