[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: acpi_piix4: expose no_hotplug attribute via i/o port
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] Re: acpi_piix4: expose no_hotplug attribute via i/o port |
Date: |
Wed, 5 Jan 2011 18:00:00 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Wed, Dec 08, 2010 at 03:11:36PM -0200, Marcelo Tosatti wrote:
>
> On top of "add hotplug opt-out option for devices" patchset
> http://www.mail-archive.com/address@hidden/msg46953.html.
>
> Signed-off-by: Marcelo Tosatti <address@hidden>
I put this patchset on my tree - want me to queue this
one too or prefer to merge through your tree?
Not sure how to test this one though, but I can
test that piix still works :)
> diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
> index 1990424..4d099e3 100644
> --- a/hw/acpi_piix4.c
> +++ b/hw/acpi_piix4.c
> @@ -38,6 +38,7 @@
> #define PROC_BASE 0xaf00
> #define PCI_BASE 0xae00
> #define PCI_EJ_BASE 0xae08
> +#define PCI_RMV_BASE 0xae0c
>
> #define PIIX4_CPU_HOTPLUG_STATUS 4
> #define PIIX4_PCI_HOTPLUG_STATUS 2
> @@ -76,6 +77,7 @@ typedef struct PIIX4PMState {
> /* for pci hotplug */
> struct gpe_regs gpe;
> struct pci_status pci0_status;
> + uint32_t pci0_hotplug_enable;
> } PIIX4PMState;
>
> static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
> @@ -326,6 +328,25 @@ static const VMStateDescription vmstate_acpi = {
> }
> };
>
> +static void piix4_update_hotplug(PIIX4PMState *s)
> +{
> + PCIDevice *dev = &s->dev;
> + BusState *bus = qdev_get_parent_bus(&dev->qdev);
> + DeviceState *qdev, *next;
> +
> + s->pci0_hotplug_enable = 0;
> +
> + QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
> + PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
> + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
> + int slot = PCI_SLOT(pdev->devfn);
> +
> + if (!info->no_hotplug) {
> + s->pci0_hotplug_enable |= (1 << slot);
> + }
> + }
> +}
> +
> static void piix4_reset(void *opaque)
> {
> PIIX4PMState *s = opaque;
> @@ -340,6 +361,7 @@ static void piix4_reset(void *opaque)
> /* Mark SMM as already inited (until KVM supports SMM). */
> pci_conf[0x5B] = 0x02;
> }
> + piix4_update_hotplug(s);
> }
>
> static void piix4_powerdown(void *opaque, int irq, int power_failing)
> @@ -594,6 +618,18 @@ static void pciej_write(void *opaque, uint32_t addr,
> uint32_t val)
> PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
> }
>
> +static uint32_t pcirmv_read(void *opaque, uint32_t addr)
> +{
> + PIIX4PMState *s = opaque;
> +
> + return s->pci0_hotplug_enable;
> +}
> +
> +static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
> +{
> + return;
> +}
> +
> extern const char *global_cpu_model;
>
> static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
> @@ -621,6 +657,9 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus,
> PIIX4PMState *s)
> register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
> register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
>
> + register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
> + register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
> +
> pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
> }
>
- [Qemu-devel] Re: acpi_piix4: expose no_hotplug attribute via i/o port,
Michael S. Tsirkin <=