qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 09/17] lm32: timer model


From: Michael Walle
Subject: [Qemu-devel] [PATCH 09/17] lm32: timer model
Date: Mon, 31 Jan 2011 01:30:38 +0100

This patch adds support for the LatticeMico32 system timer.

Signed-off-by: Michael Walle <address@hidden>
---
 Makefile.target |    1 +
 hw/lm32_timer.c |  227 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 trace-events    |    6 ++
 3 files changed, 234 insertions(+), 0 deletions(-)
 create mode 100644 hw/lm32_timer.c

diff --git a/Makefile.target b/Makefile.target
index c9a61a0..04c4214 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -251,6 +251,7 @@ obj-ppc-y += xilinx_ethlite.o
 obj-lm32-y += lm32_pic.o
 obj-lm32-y += lm32_pic_cpu.o
 obj-lm32-y += lm32_juart.o
+obj-lm32-y += lm32_timer.o
 
 obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
 obj-mips-y += mips_addr.o mips_timer.o mips_int.o
diff --git a/hw/lm32_timer.c b/hw/lm32_timer.c
new file mode 100644
index 0000000..3bfc29d
--- /dev/null
+++ b/hw/lm32_timer.c
@@ -0,0 +1,227 @@
+/*
+ *  QEMU model of the LatticeMico32 timer block.
+ *
+ *  Copyright (c) 2010 Michael Walle <address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * Specification available at:
+ *   http://www.latticesemi.com/documents/mico32timer.pdf
+ */
+
+#include "hw.h"
+#include "sysbus.h"
+#include "trace.h"
+#include "qemu-timer.h"
+
+#define DEFAULT_FREQUENCY (50*1000000)
+
+enum {
+    R_SR = 0,
+    R_CR,
+    R_PERIOD,
+    R_SNAPSHOT,
+    R_MAX
+};
+
+enum {
+    SR_TO    = (1 << 0),
+    SR_RUN   = (1 << 1),
+};
+
+enum {
+    CR_ITO   = (1 << 0),
+    CR_CONT  = (1 << 1),
+    CR_START = (1 << 2),
+    CR_STOP  = (1 << 3),
+};
+
+struct LM32TimerState {
+    SysBusDevice busdev;
+
+    QEMUBH *bh;
+    ptimer_state *ptimer;
+
+    qemu_irq irq;
+    uint32_t freq_hz;
+
+    uint32_t regs[R_MAX];
+};
+typedef struct LM32TimerState LM32TimerState;
+
+static void timer_update_irq(LM32TimerState *s)
+{
+    int state = s->regs[R_SR] & SR_TO && s->regs[R_CR] & CR_ITO;
+
+    trace_lm32_timer_irq_state(state);
+    qemu_set_irq(s->irq, state);
+}
+
+static uint32_t timer_read(void *opaque, target_phys_addr_t addr)
+{
+    LM32TimerState *s = opaque;
+    uint32_t r = 0;
+
+    addr >>= 2;
+    switch (addr) {
+    case R_SR:
+    case R_CR:
+    case R_PERIOD:
+        r = s->regs[addr];
+        break;
+    case R_SNAPSHOT:
+        r = (uint32_t)ptimer_get_count(s->ptimer);
+        break;
+
+    default:
+        hw_error("lm32_timer: read access to unkown register 0x"
+                TARGET_FMT_plx, addr << 2);
+        break;
+
+    }
+
+    trace_lm32_timer_memory_read(addr << 2, r);
+    return r;
+}
+
+static void timer_write(void *opaque, target_phys_addr_t addr, uint32_t value)
+{
+    LM32TimerState *s = opaque;
+
+    trace_lm32_timer_memory_write(addr, value);
+
+    addr >>= 2;
+    switch (addr) {
+    case R_SR:
+        s->regs[R_SR] &= ~SR_TO;
+        break;
+    case R_CR:
+        s->regs[R_CR] = value;
+        if (s->regs[R_CR] & CR_START) {
+            ptimer_run(s->ptimer, 1);
+        }
+        if (s->regs[R_CR] & CR_STOP) {
+            ptimer_stop(s->ptimer);
+        }
+        break;
+    case R_PERIOD:
+        s->regs[R_PERIOD] = value;
+        ptimer_set_count(s->ptimer, value);
+        break;
+    case R_SNAPSHOT:
+        hw_error("lm32_timer: write access to read only register 0x"
+                TARGET_FMT_plx, addr << 2);
+        break;
+
+    default:
+        hw_error("lm32_timer: write access to unkown register 0x"
+                TARGET_FMT_plx, addr << 2);
+        break;
+    }
+    timer_update_irq(s);
+}
+
+static CPUReadMemoryFunc * const timer_read_fn[] = {
+    NULL,
+    NULL,
+    &timer_read,
+};
+
+static CPUWriteMemoryFunc * const timer_write_fn[] = {
+    NULL,
+    NULL,
+    &timer_write,
+};
+
+static void timer_hit(void *opaque)
+{
+    LM32TimerState *s = opaque;
+
+    trace_lm32_timer_hit();
+
+    s->regs[R_SR] |= SR_TO;
+
+    if (s->regs[R_CR] & CR_CONT) {
+        ptimer_set_count(s->ptimer, s->regs[R_PERIOD]);
+        ptimer_run(s->ptimer, 1);
+    }
+
+    timer_update_irq(s);
+}
+
+static void timer_reset(void *opaque)
+{
+    LM32TimerState *s = opaque;
+    int i;
+
+    for (i = 0; i < R_MAX; i++) {
+        s->regs[i] = 0;
+    }
+    ptimer_stop(s->ptimer);
+    qemu_irq_lower(s->irq);
+}
+
+static int lm32_timer_init(SysBusDevice *dev)
+{
+    LM32TimerState *s = FROM_SYSBUS(typeof(*s), dev);
+    int timer_regs;
+
+    sysbus_init_irq(dev, &s->irq);
+
+    s->bh = qemu_bh_new(timer_hit, s);
+    s->ptimer = ptimer_init(s->bh);
+    ptimer_set_freq(s->ptimer, s->freq_hz);
+
+    timer_regs = cpu_register_io_memory(timer_read_fn, timer_write_fn, s,
+            DEVICE_NATIVE_ENDIAN);
+    sysbus_init_mmio(dev, R_MAX * 4, timer_regs);
+
+    qemu_register_reset(timer_reset, s);
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_lm32_timer = {
+    .name = "lm32-timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_PTIMER(ptimer, LM32TimerState),
+        VMSTATE_UINT32(freq_hz, LM32TimerState),
+        VMSTATE_UINT32_ARRAY(regs, LM32TimerState, R_MAX),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static SysBusDeviceInfo lm32_timer_info = {
+    .init = lm32_timer_init,
+    .qdev.name  = "lm32-timer",
+    .qdev.size  = sizeof(LM32TimerState),
+    .qdev.vmsd  = &vmstate_lm32_timer,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_UINT32(
+                "frequency", LM32TimerState, freq_hz, DEFAULT_FREQUENCY
+        ),
+        DEFINE_PROP_END_OF_LIST(),
+    }
+};
+
+static void lm32_timer_register(void)
+{
+    sysbus_register_withprop(&lm32_timer_info);
+}
+
+device_init(lm32_timer_register)
diff --git a/trace-events b/trace-events
index c82588f..357c5f7 100644
--- a/trace-events
+++ b/trace-events
@@ -228,3 +228,9 @@ disable lm32_juart_get_jtx(uint32_t value) "value=%08x"
 disable lm32_juart_set_jtx(uint32_t value) "value=%08x"
 disable lm32_juart_get_jrx(uint32_t value) "value=%08x"
 disable lm32_juart_set_jrx(uint32_t value) "value=%08x"
+
+# hw/lm32_timer.c
+disable lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
+disable lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr=%08x 
value=%08x"
+disable lm32_timer_hit(void) "Timer hit"
+disable lm32_timer_irq_state(int level) "Timer IRQ state %d"
-- 
1.7.2.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]