qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [0.14?][PATCH 1/4] ioapic: Implement EOI handling for l


From: Anthony Liguori
Subject: [Qemu-devel] Re: [0.14?][PATCH 1/4] ioapic: Implement EOI handling for level-triggered IRQs
Date: Thu, 03 Feb 2011 13:59:56 -0600
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.15) Gecko/20101027 Lightning/1.0b1 Thunderbird/3.0.10

On 02/03/2011 08:55 AM, Jan Kiszka wrote:
Add the missing EOI broadcast from local APIC to the IOAPICs on
completion of level-triggered IRQs. This ensures that a still asserted
IRQ source properly re-triggers an APIC IRQ.

Signed-off-by: Jan Kiszka<address@hidden>
---
  hw/apic.c   |    9 ++++++---
  hw/ioapic.c |   43 +++++++++++++++++++++++++++++++++++++++++--
  hw/ioapic.h |   20 ++++++++++++++++++++
  3 files changed, 67 insertions(+), 5 deletions(-)
  create mode 100644 hw/ioapic.h

diff --git a/hw/apic.c b/hw/apic.c
index ff581f0..05a115f 100644
--- a/hw/apic.c
+++ b/hw/apic.c
@@ -18,6 +18,7 @@
   */
  #include "hw.h"
  #include "apic.h"
+#include "ioapic.h"
  #include "qemu-timer.h"
  #include "host-utils.h"
  #include "sysbus.h"
@@ -57,7 +58,8 @@

  #define ESR_ILLEGAL_ADDRESS (1<<  7)

-#define APIC_SV_ENABLE (1<<  8)
+#define APIC_SV_DIRECTED_IO             (1<<12)
+#define APIC_SV_ENABLE                  (1<<8)

  #define MAX_APICS 255
  #define MAX_APIC_WORDS 8
@@ -420,8 +422,9 @@ static void apic_eoi(APICState *s)
      if (isrv<  0)
          return;
      reset_bit(s->isr, isrv);
-    /* XXX: send the EOI packet to the APIC bus to allow the I/O APIC to
-            set the remote IRR bit for level triggered interrupts. */
+    if (!(s->spurious_vec&  APIC_SV_DIRECTED_IO)&&  get_bit(s->tmr, isrv)) {
+        ioapic_eio_broadcast(isrv);
+    }
      apic_update_irq(s);
  }

diff --git a/hw/ioapic.c b/hw/ioapic.c
index 2109568..443c579 100644
--- a/hw/ioapic.c
+++ b/hw/ioapic.c
@@ -23,6 +23,7 @@
  #include "hw.h"
  #include "pc.h"
  #include "apic.h"
+#include "ioapic.h"
  #include "qemu-timer.h"
  #include "host-utils.h"
  #include "sysbus.h"
@@ -36,7 +37,10 @@
  #define DPRINTF(fmt, ...)
  #endif

-#define IOAPIC_LVT_MASKED              (1<<16)
+#define MAX_IOAPICS                     1
+
+#define IOAPIC_LVT_MASKED               (1<<  16)
+#define IOAPIC_LVT_REMOTE_IRR           (1<<  14)

  #define IOAPIC_TRIGGER_EDGE           0
  #define IOAPIC_TRIGGER_LEVEL          1
@@ -61,6 +65,8 @@ struct IOAPICState {
      uint64_t ioredtbl[IOAPIC_NUM_PINS];
  };

+static IOAPICState *ioapics[MAX_IOAPICS];
+
  static void ioapic_service(IOAPICState *s)
  {
      uint8_t i;
@@ -83,8 +89,11 @@ static void ioapic_service(IOAPICState *s)
                  dest_mode = (entry>>  11)&  1;
                  delivery_mode = (entry>>  8)&  7;
                  polarity = (entry>>  13)&  1;
-                if (trig_mode == IOAPIC_TRIGGER_EDGE)
+                if (trig_mode == IOAPIC_TRIGGER_EDGE) {
                      s->irr&= ~mask;
+                } else {
+                    s->ioredtbl[i] |= IOAPIC_LVT_REMOTE_IRR;
+                }
                  if (delivery_mode == IOAPIC_DM_EXTINT)
                      vector = pic_read_irq(isa_pic);
                  else
@@ -131,6 +140,29 @@ static void ioapic_set_irq(void *opaque, int vector, int 
level)
      }
  }

+void ioapic_eio_broadcast(int vector)

You mean iopaic_eoi_broadcast(), no?

Regards,

Anthony Liguori

+{
+    IOAPICState *s;
+    uint64_t entry;
+    int i, n;
+
+    for (i = 0; i<  MAX_IOAPICS; i++) {
+        s = ioapics[i];
+        if (!s) {
+            continue;
+        }
+        for (n = 0; n<  IOAPIC_NUM_PINS; n++) {
+            entry = s->ioredtbl[n];
+            if ((entry&  IOAPIC_LVT_REMOTE_IRR)&&  (entry&  0xff) == vector) {
+                s->ioredtbl[n] = entry&  ~IOAPIC_LVT_REMOTE_IRR;
+                if (!(entry&  IOAPIC_LVT_MASKED)&&  (s->irr&  (1<<  n))) {
+                    ioapic_service(s);
+                }
+            }
+        }
+    }
+}
+
  static uint32_t ioapic_mem_readl(void *opaque, target_phys_addr_t addr)
  {
      IOAPICState *s = opaque;
@@ -240,6 +272,11 @@ static int ioapic_init1(SysBusDevice *dev)
  {
      IOAPICState *s = FROM_SYSBUS(IOAPICState, dev);
      int io_memory;
+    static int ioapic_no;
+
+    if (ioapic_no>= MAX_IOAPICS) {
+        return -1;
+    }

      io_memory = cpu_register_io_memory(ioapic_mem_read,
                                         ioapic_mem_write, s,
@@ -248,6 +285,8 @@ static int ioapic_init1(SysBusDevice *dev)

      qdev_init_gpio_in(&dev->qdev, ioapic_set_irq, IOAPIC_NUM_PINS);

+    ioapics[ioapic_no++] = s;
+
      return 0;
  }

diff --git a/hw/ioapic.h b/hw/ioapic.h
new file mode 100644
index 0000000..c441567
--- /dev/null
+++ b/hw/ioapic.h
@@ -0,0 +1,20 @@
+/*
+ *  ioapic.c IOAPIC emulation logic
+ *
+ *  Copyright (c) 2011 Jan Kiszka, Siemens AG
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see<http://www.gnu.org/licenses/>.
+ */
+
+void ioapic_eio_broadcast(int vector);




reply via email to

[Prev in Thread] Current Thread [Next in Thread]