qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 06/13] eepro100: use the DMA memory access interface


From: Eduard - Gabriel Munteanu
Subject: [Qemu-devel] [PATCH 06/13] eepro100: use the DMA memory access interface
Date: Fri, 4 Feb 2011 01:33:00 +0200

This allows the device to work properly with an emulated IOMMU.

Signed-off-by: Eduard - Gabriel Munteanu <address@hidden>
---
 hw/eepro100.c |   97 +++++++++++++++++++++++++++++++++-----------------------
 1 files changed, 57 insertions(+), 40 deletions(-)

diff --git a/hw/eepro100.c b/hw/eepro100.c
index edf48f6..58defcf 100644
--- a/hw/eepro100.c
+++ b/hw/eepro100.c
@@ -308,10 +308,12 @@ static const uint16_t eepro100_mdi_mask[] = {
 };
 
 /* XXX: optimize */
-static void stl_le_phys(target_phys_addr_t addr, uint32_t val)
+static void stl_le_phys(EEPRO100State * s, pcibus_t addr, uint32_t val)
 {
+    DMADevice *dma = &s->dev.dma;
+
     val = cpu_to_le32(val);
-    cpu_physical_memory_write(addr, (const uint8_t *)&val, sizeof(val));
+    dma_memory_write(dma, addr, (const uint8_t *)&val, sizeof(val));
 }
 
 #define POLYNOMIAL 0x04c11db6
@@ -689,17 +691,19 @@ static void set_ru_state(EEPRO100State * s, ru_state_t 
state)
 
 static void dump_statistics(EEPRO100State * s)
 {
+    DMADevice *dma = &s->dev.dma;
+
     /* Dump statistical data. Most data is never changed by the emulation
      * and always 0, so we first just copy the whole block and then those
      * values which really matter.
      * Number of data should check configuration!!!
      */
-    cpu_physical_memory_write(s->statsaddr,
-                              (uint8_t *) & s->statistics, s->stats_size);
-    stl_le_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
-    stl_le_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
-    stl_le_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
-    stl_le_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
+    dma_memory_write(dma, s->statsaddr,
+                     (uint8_t *) & s->statistics, s->stats_size);
+    stl_le_phys(s, s->statsaddr + 0, s->statistics.tx_good_frames);
+    stl_le_phys(s, s->statsaddr + 36, s->statistics.rx_good_frames);
+    stl_le_phys(s, s->statsaddr + 48, s->statistics.rx_resource_errors);
+    stl_le_phys(s, s->statsaddr + 60, s->statistics.rx_short_frame_errors);
 #if 0
     stw_le_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
     stw_le_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
@@ -709,7 +713,9 @@ static void dump_statistics(EEPRO100State * s)
 
 static void read_cb(EEPRO100State *s)
 {
-    cpu_physical_memory_read(s->cb_address, (uint8_t *) &s->tx, sizeof(s->tx));
+    DMADevice *dma = &s->dev.dma;
+
+    dma_memory_read(dma, s->cb_address, (uint8_t *) &s->tx, sizeof(s->tx));
     s->tx.status = le16_to_cpu(s->tx.status);
     s->tx.command = le16_to_cpu(s->tx.command);
     s->tx.link = le32_to_cpu(s->tx.link);
@@ -719,6 +725,7 @@ static void read_cb(EEPRO100State *s)
 
 static void tx_command(EEPRO100State *s)
 {
+    DMADevice *dma = &s->dev.dma;
     uint32_t tbd_array = le32_to_cpu(s->tx.tbd_array_addr);
     uint16_t tcb_bytes = (le16_to_cpu(s->tx.tcb_bytes) & 0x3fff);
     /* Sends larger than MAX_ETH_FRAME_SIZE are allowed, up to 2600 bytes. */
@@ -739,18 +746,18 @@ static void tx_command(EEPRO100State *s)
     }
     assert(tcb_bytes <= sizeof(buf));
     while (size < tcb_bytes) {
-        uint32_t tx_buffer_address = ldl_phys(tbd_address);
-        uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+        uint32_t tx_buffer_address = dma_ldl(dma, tbd_address);
+        uint16_t tx_buffer_size = dma_lduw(dma, tbd_address + 4);
 #if 0
-        uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+        uint16_t tx_buffer_el = dma_lduw(dma, tbd_address + 6);
 #endif
         tbd_address += 8;
         TRACE(RXTX, logout
             ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
              tx_buffer_address, tx_buffer_size));
         tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-        cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                 tx_buffer_size);
+        dma_memory_read(dma,
+                        tx_buffer_address, &buf[size], tx_buffer_size);
         size += tx_buffer_size;
     }
     if (tbd_array == 0xffffffff) {
@@ -761,16 +768,16 @@ static void tx_command(EEPRO100State *s)
         if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) {
             /* Extended Flexible TCB. */
             for (; tbd_count < 2; tbd_count++) {
-                uint32_t tx_buffer_address = ldl_phys(tbd_address);
-                uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
-                uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+                uint32_t tx_buffer_address = dma_ldl(dma, tbd_address);
+                uint16_t tx_buffer_size = dma_lduw(dma, tbd_address + 4);
+                uint16_t tx_buffer_el = dma_lduw(dma, tbd_address + 6);
                 tbd_address += 8;
                 TRACE(RXTX, logout
                     ("TBD (extended flexible mode): buffer address 0x%08x, 
size 0x%04x\n",
                      tx_buffer_address, tx_buffer_size));
                 tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-                cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                         tx_buffer_size);
+                dma_memory_read(dma,
+                                tx_buffer_address, &buf[size], tx_buffer_size);
                 size += tx_buffer_size;
                 if (tx_buffer_el & 1) {
                     break;
@@ -779,16 +786,16 @@ static void tx_command(EEPRO100State *s)
         }
         tbd_address = tbd_array;
         for (; tbd_count < s->tx.tbd_count; tbd_count++) {
-            uint32_t tx_buffer_address = ldl_phys(tbd_address);
-            uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
-            uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+            uint32_t tx_buffer_address = dma_ldl(dma, tbd_address);
+            uint16_t tx_buffer_size = dma_lduw(dma, tbd_address + 4);
+            uint16_t tx_buffer_el = dma_lduw(dma, tbd_address + 6);
             tbd_address += 8;
             TRACE(RXTX, logout
                 ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
                  tx_buffer_address, tx_buffer_size));
             tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
-            cpu_physical_memory_read(tx_buffer_address, &buf[size],
-                                     tx_buffer_size);
+            dma_memory_read(dma,
+                            tx_buffer_address, &buf[size], tx_buffer_size);
             size += tx_buffer_size;
             if (tx_buffer_el & 1) {
                 break;
@@ -807,13 +814,14 @@ static void tx_command(EEPRO100State *s)
 
 static void set_multicast_list(EEPRO100State *s)
 {
+    DMADevice *dma = &s->dev.dma;
     uint16_t multicast_count = s->tx.tbd_array_addr & BITS(13, 0);
     uint16_t i;
     memset(&s->mult[0], 0, sizeof(s->mult));
     TRACE(OTHER, logout("multicast list, multicast count = %u\n", 
multicast_count));
     for (i = 0; i < multicast_count; i += 6) {
         uint8_t multicast_addr[6];
-        cpu_physical_memory_read(s->cb_address + 10 + i, multicast_addr, 6);
+        dma_memory_read(dma, s->cb_address + 10 + i, multicast_addr, 6);
         TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 
6)));
         unsigned mcast_idx = compute_mcast_idx(multicast_addr);
         assert(mcast_idx < 64);
@@ -823,6 +831,8 @@ static void set_multicast_list(EEPRO100State *s)
 
 static void action_command(EEPRO100State *s)
 {
+    DMADevice *dma = &s->dev.dma;
+
     for (;;) {
         bool bit_el;
         bool bit_s;
@@ -847,12 +857,14 @@ static void action_command(EEPRO100State *s)
             /* Do nothing. */
             break;
         case CmdIASetup:
-            cpu_physical_memory_read(s->cb_address + 8, &s->conf.macaddr.a[0], 
6);
+            dma_memory_read(dma,
+                            s->cb_address + 8, &s->conf.macaddr.a[0], 6);
             TRACE(OTHER, logout("macaddr: %s\n", 
nic_dump(&s->conf.macaddr.a[0], 6)));
             break;
         case CmdConfigure:
-            cpu_physical_memory_read(s->cb_address + 8, &s->configuration[0],
-                                     sizeof(s->configuration));
+            dma_memory_read(dma,
+                            s->cb_address + 8,
+                            &s->configuration[0], sizeof(s->configuration));
             TRACE(OTHER, logout("configuration: %s\n",
                                 nic_dump(&s->configuration[0], 16)));
             TRACE(OTHER, logout("configuration: %s\n",
@@ -889,7 +901,7 @@ static void action_command(EEPRO100State *s)
             break;
         }
         /* Write new status. */
-        stw_phys(s->cb_address, s->tx.status | ok_status | STATUS_C);
+        dma_stw(dma, s->cb_address, s->tx.status | ok_status | STATUS_C);
         if (bit_i) {
             /* CU completed action. */
             eepro100_cx_interrupt(s);
@@ -956,7 +968,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t 
val)
         /* Dump statistical counters. */
         TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val));
         dump_statistics(s);
-        stl_le_phys(s->statsaddr + s->stats_size, 0xa005);
+        stl_le_phys(s, s->statsaddr + s->stats_size, 0xa005);
         break;
     case CU_CMD_BASE:
         /* Load CU base. */
@@ -967,7 +979,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t 
val)
         /* Dump and reset statistical counters. */
         TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val));
         dump_statistics(s);
-        stl_le_phys(s->statsaddr + s->stats_size, 0xa007);
+        stl_le_phys(s, s->statsaddr + s->stats_size, 0xa007);
         memset(&s->statistics, 0, sizeof(s->statistics));
         break;
     case CU_SRESUME:
@@ -1259,6 +1271,7 @@ static uint32_t eepro100_read_port(EEPRO100State * s)
 static void eepro100_write_port(EEPRO100State * s, uint32_t val)
 {
     val = le32_to_cpu(val);
+    DMADevice *dma = &s->dev.dma;
     uint32_t address = (val & ~PORT_SELECTION_MASK);
     uint8_t selection = (val & PORT_SELECTION_MASK);
     switch (selection) {
@@ -1268,10 +1281,10 @@ static void eepro100_write_port(EEPRO100State * s, 
uint32_t val)
     case PORT_SELFTEST:
         TRACE(OTHER, logout("selftest address=0x%08x\n", address));
         eepro100_selftest_t data;
-        cpu_physical_memory_read(address, (uint8_t *) & data, sizeof(data));
+        dma_memory_read(dma, address, (uint8_t *) & data, sizeof(data));
         data.st_sign = 0xffffffff;
         data.st_result = 0;
-        cpu_physical_memory_write(address, (uint8_t *) & data, sizeof(data));
+        dma_memory_write(dma, address, (uint8_t *) & data, sizeof(data));
         break;
     case PORT_SELECTIVE_RESET:
         TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n", 
address));
@@ -1652,6 +1665,7 @@ static ssize_t nic_receive(VLANClientState *nc, const 
uint8_t * buf, size_t size
      * - Interesting packets should set bit 29 in power management driver 
register.
      */
     EEPRO100State *s = DO_UPCAST(NICState, nc, nc)->opaque;
+    DMADevice *dma = &s->dev.dma;
     uint16_t rfd_status = 0xa000;
     static const uint8_t broadcast_macaddr[6] =
         { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
@@ -1734,8 +1748,9 @@ static ssize_t nic_receive(VLANClientState *nc, const 
uint8_t * buf, size_t size
     }
     /* !!! */
     eepro100_rx_t rx;
-    cpu_physical_memory_read(s->ru_base + s->ru_offset, (uint8_t *) & rx,
-                             offsetof(eepro100_rx_t, packet));
+    dma_memory_read(dma,
+                    s->ru_base + s->ru_offset,
+                    (uint8_t *) & rx, offsetof(eepro100_rx_t, packet));
     uint16_t rfd_command = le16_to_cpu(rx.command);
     uint16_t rfd_size = le16_to_cpu(rx.size);
 
@@ -1749,9 +1764,11 @@ static ssize_t nic_receive(VLANClientState *nc, const 
uint8_t * buf, size_t size
     }
     TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n",
           rfd_command, rx.link, rx.rx_buf_addr, rfd_size));
-    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
-             rfd_status);
-    stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
+    dma_stw(dma,
+            s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
+            rfd_status);
+    dma_stw(dma,
+            s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
     /* Early receive interrupt not supported. */
 #if 0
     eepro100_er_interrupt(s);
@@ -1765,8 +1782,8 @@ static ssize_t nic_receive(VLANClientState *nc, const 
uint8_t * buf, size_t size
 #if 0
     assert(!(s->configuration[17] & BIT(0)));
 #endif
-    cpu_physical_memory_write(s->ru_base + s->ru_offset +
-                              offsetof(eepro100_rx_t, packet), buf, size);
+    dma_memory_write(dma, s->ru_base + s->ru_offset +
+                     offsetof(eepro100_rx_t, packet), buf, size);
     s->statistics.rx_good_frames++;
     eepro100_fr_interrupt(s);
     s->ru_offset = le32_to_cpu(rx.link);
-- 
1.7.3.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]