qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3] Fix ATA SMART and CHECK POWER MODE


From: Brian Wheeler
Subject: [Qemu-devel] [PATCH v3] Fix ATA SMART and CHECK POWER MODE
Date: Wed, 09 Feb 2011 17:12:06 -0500

This patch fixes two things:
 
 1) CHECK POWER MODE
 
The error return value wasn't always zero, so it would show up as
offline.  Error is now explicitly set to zero.
 
 2) SMART
 
The smart values that were returned were invalid and tools like skdump
would not recognize that the smart data was actually valid and would
dump weird output.  The data has been fixed up and raw value support
was added.  Tools like skdump and palimpsest work as expected.

v3 changes:  don't reformat code I didn't change
v2 changes:  use single structure instead of one for thresholds and one
for data.

Signed-off-by: address@hidden
----------------
diff --git a/hw/ide/core.c b/hw/ide/core.c
index dd63664..b0b0b35 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -34,13 +34,26 @@
 
 #include <hw/ide/internal.h>
 
-static const int smart_attributes[][5] = {
-    /* id,  flags, val, wrst, thrsh */
-    { 0x01, 0x03, 0x64, 0x64, 0x06}, /* raw read */
-    { 0x03, 0x03, 0x64, 0x64, 0x46}, /* spin up */
-    { 0x04, 0x02, 0x64, 0x64, 0x14}, /* start stop count */
-    { 0x05, 0x03, 0x64, 0x64, 0x36}, /* remapped sectors */
-    { 0x00, 0x00, 0x00, 0x00, 0x00}
+/* These values were taking from a running system, specifically a
+   Seagate ST3500418AS */
+static const int smart_attributes[][12] = {
+    /* id,  flags, hflags, val, wrst, raw (6 bytes), threshold */
+    /* raw read error rate*/
+    { 0x01, 0x03, 0x00, 0x74, 0x63, 0x31, 0x6d, 0x3f, 0x0d, 0x00, 0x00, 0x06},
+    /* spin up */
+    { 0x03, 0x03, 0x00, 0x61, 0x61, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+    /* start stop count */
+    { 0x04, 0x02, 0x00, 0x64, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14},
+    /* remapped sectors */
+    { 0x05, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24},
+    /* power on hours */
+    { 0x09, 0x03, 0x00, 0x61, 0x61, 0x68, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00},
+    /* power cycle count */
+    { 0x0c, 0x03, 0x00, 0x64, 0x64, 0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+    /* airflow-temperature-celsius */
+    { 190,  0x03, 0x00, 0x64, 0x64, 0x1f, 0x00, 0x16, 0x22, 0x00, 0x00, 0x32},
+    /* end of list */
+    { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
 };
 
 /* XXX: DVDs that could fit on a CD will be reported as a CD */
@@ -1843,6 +1856,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
         break;
     case WIN_CHECKPOWERMODE1:
     case WIN_CHECKPOWERMODE2:
+        s->error = 0;
         s->nsector = 0xff; /* device active or idle */
         s->status = READY_STAT | SEEK_STAT;
         ide_set_irq(s->bus);
@@ -2097,7 +2111,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
                if (smart_attributes[n][0] == 0)
                        break;
                s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
-               s->io_buffer[2+1+(n*12)] = smart_attributes[n][4];
+               s->io_buffer[2+1+(n*12)] = smart_attributes[n][11];
                }
                for (n=0; n<511; n++) /* checksum */
                s->io_buffer[511] += s->io_buffer[n];
@@ -2110,12 +2124,13 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
                memset(s->io_buffer, 0, 0x200);
                s->io_buffer[0] = 0x01; /* smart struct version */
                for (n=0; n<30; n++) {
-               if (smart_attributes[n][0] == 0)
+                   if (smart_attributes[n][0] == 0) {
                        break;
-               s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
-               s->io_buffer[2+1+(n*12)] = smart_attributes[n][1];
-               s->io_buffer[2+3+(n*12)] = smart_attributes[n][2];
-               s->io_buffer[2+4+(n*12)] = smart_attributes[n][3];
+                   }
+                   int i;
+                   for(i = 0; i < 11; i++) {
+                       s->io_buffer[2+i+(n*12)] = smart_attributes[n][i];
+                   }
                }
                s->io_buffer[362] = 0x02 | (s->smart_autosave?0x80:0x00);
                if (s->smart_selftest_count == 0) {





reply via email to

[Prev in Thread] Current Thread [Next in Thread]