[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 4/4] USB: add usb network redirection support
|
From: |
Gerd Hoffmann |
|
Subject: |
[Qemu-devel] [PATCH 4/4] USB: add usb network redirection support |
|
Date: |
Fri, 22 Jul 2011 14:01:06 +0200 |
From: Hans de Goede <address@hidden>
This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <address@hidden>
Signed-off-by: Gerd Hoffmann <address@hidden>
---
Makefile.objs | 1 +
configure | 28 ++
usb-redir.c | 1218 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1247 insertions(+), 0 deletions(-)
create mode 100644 usb-redir.c
diff --git a/Makefile.objs b/Makefile.objs
index c43ed05..a82974b 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -205,6 +205,7 @@ hw-obj-$(CONFIG_HPET) += hpet.o
hw-obj-$(CONFIG_APPLESMC) += applesmc.o
hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
+hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
# PPC devices
hw-obj-$(CONFIG_OPENPIC) += openpic.o
diff --git a/configure b/configure
index e57efb1..3a76bb8 100755
--- a/configure
+++ b/configure
@@ -177,6 +177,7 @@ spice=""
rbd=""
smartcard=""
smartcard_nss=""
+usb_redir=""
opengl=""
# parse CC options first
@@ -743,6 +744,10 @@ for opt do
;;
--enable-smartcard-nss) smartcard_nss="yes"
;;
+ --disable-usb-redir) usb_redir="no"
+ ;;
+ --enable-usb-redir) usb_redir="yes"
+ ;;
*) echo "ERROR: unknown option $opt"; show_help="yes"
;;
esac
@@ -1018,6 +1023,8 @@ echo " --disable-smartcard disable smartcard
support"
echo " --enable-smartcard enable smartcard support"
echo " --disable-smartcard-nss disable smartcard nss support"
echo " --enable-smartcard-nss enable smartcard nss support"
+echo " --disable-usb-redir disable usb network redirection support"
+echo " --enable-usb-redir enable usb network redirection support"
echo ""
echo "NOTE: The object files are built at the place where configure is
launched"
exit 1
@@ -2371,6 +2378,22 @@ if test "$smartcard" = "no" ; then
smartcard_nss="no"
fi
+# check for usbredirparser for usb network redirection support
+if test "$usb_redir" != "no" ; then
+ if $pkg_config libusbredirparser >/dev/null 2>&1 ; then
+ usb_redir="yes"
+ usb_redir_cflags=$($pkg_config --cflags libusbredirparser 2>/dev/null)
+ usb_redir_libs=$($pkg_config --libs libusbredirparser 2>/dev/null)
+ QEMU_CFLAGS="$QEMU_CFLAGS $usb_redir_cflags"
+ LIBS="$LIBS $usb_redir_libs"
+ else
+ if test "$usb_redir" = "yes"; then
+ feature_not_found "usb-redir"
+ fi
+ usb_redir="no"
+ fi
+fi
+
##########################################
##########################################
@@ -2617,6 +2640,7 @@ echo "spice support $spice"
echo "rbd support $rbd"
echo "xfsctl support $xfs"
echo "nss used $smartcard_nss"
+echo "usb net redir $usb_redir"
echo "OpenGL support $opengl"
if test $sdl_too_old = "yes"; then
@@ -2910,6 +2934,10 @@ if test "$smartcard_nss" = "yes" ; then
echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak
fi
+if test "$usb_redir" = "yes" ; then
+ echo "CONFIG_USB_REDIR=y" >> $config_host_mak
+fi
+
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
fi
diff --git a/usb-redir.c b/usb-redir.c
new file mode 100644
index 0000000..e212993
--- /dev/null
+++ b/usb-redir.c
@@ -0,0 +1,1218 @@
+/*
+ * USB redirector usb-guest
+ *
+ * Copyright (c) 2011 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <address@hidden>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu-common.h"
+#include "qemu-timer.h"
+#include "monitor.h"
+#include "sysemu.h"
+
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+#include <usbredirparser.h>
+
+#include "hw/usb.h"
+
+#define MAX_ENDPOINTS 32
+#define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f))
+#define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f))
+
+typedef struct AsyncURB AsyncURB;
+typedef struct USBRedirDevice USBRedirDevice;
+
+/* Struct to hold buffered packets (iso or int input packets) */
+struct buf_packet {
+ uint8_t *data;
+ int len;
+ int status;
+ QTAILQ_ENTRY(buf_packet)next;
+};
+
+struct endp_data {
+ uint8_t type;
+ uint8_t interval;
+ uint8_t interface; /* bInterfaceNumber this ep belongs to */
+ uint8_t iso_started;
+ uint8_t iso_error; /* For reporting iso errors to the HC */
+ uint8_t interrupt_started;
+ uint8_t interrupt_error;
+ QTAILQ_HEAD(, buf_packet) bufpq;
+};
+
+struct USBRedirDevice {
+ USBDevice dev;
+ /* Properties */
+ CharDriverState *cs;
+ uint8_t debug;
+ /* Data passed from chardev the fd_read cb to the usbredirparser read cb */
+ const uint8_t *read_buf;
+ int read_buf_size;
+ /* For async handling of open/close */
+ QEMUBH *open_close_bh;
+ /* To delay the usb attach in case of quick chardev close + open */
+ QEMUTimer *attach_timer;
+ int64_t next_attach_time;
+ struct usbredirparser *parser;
+ struct endp_data endpoint[MAX_ENDPOINTS];
+ uint32_t packet_id;
+ QTAILQ_HEAD(, AsyncURB) asyncq;
+};
+
+struct AsyncURB {
+ USBRedirDevice *dev;
+ USBPacket *packet;
+ uint32_t packet_id;
+ int get;
+ union {
+ struct usb_redir_control_packet_header control_packet;
+ struct usb_redir_bulk_packet_header bulk_packet;
+ struct usb_redir_interrupt_packet_header interrupt_packet;
+ };
+ QTAILQ_ENTRY(AsyncURB)next;
+};
+
+static void usbredir_device_connect(void *priv,
+ struct usb_redir_device_connect_header *device_connect);
+static void usbredir_device_disconnect(void *priv);
+static void usbredir_interface_info(void *priv,
+ struct usb_redir_interface_info_header *interface_info);
+static void usbredir_ep_info(void *priv,
+ struct usb_redir_ep_info_header *ep_info);
+static void usbredir_configuration_status(void *priv, uint32_t id,
+ struct usb_redir_configuration_status_header *configuration_status);
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+ struct usb_redir_alt_setting_status_header *alt_setting_status);
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+ struct usb_redir_iso_stream_status_header *iso_stream_status);
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+ struct usb_redir_interrupt_receiving_status_header
+ *interrupt_receiving_status);
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+ struct usb_redir_bulk_streams_status_header *bulk_streams_status);
+static void usbredir_control_packet(void *priv, uint32_t id,
+ struct usb_redir_control_packet_header *control_packet,
+ uint8_t *data, int data_len);
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+ struct usb_redir_bulk_packet_header *bulk_packet,
+ uint8_t *data, int data_len);
+static void usbredir_iso_packet(void *priv, uint32_t id,
+ struct usb_redir_iso_packet_header *iso_packet,
+ uint8_t *data, int data_len);
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+ struct usb_redir_interrupt_packet_header *interrupt_header,
+ uint8_t *data, int data_len);
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+ int status, int actual_len);
+
+#define VERSION "qemu usb-redir guest " QEMU_VERSION
+
+/*
+ * Logging stuff
+ */
+
+#define ERROR(...) \
+ do { \
+ if (dev->debug >= usbredirparser_error) { \
+ error_report("usb-redir error: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define WARNING(...) \
+ do { \
+ if (dev->debug >= usbredirparser_warning) { \
+ error_report("usb-redir warning: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define INFO(...) \
+ do { \
+ if (dev->debug >= usbredirparser_info) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define DPRINTF(...) \
+ do { \
+ if (dev->debug >= usbredirparser_debug) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+#define DPRINTF2(...) \
+ do { \
+ if (dev->debug >= usbredirparser_debug_data) { \
+ error_report("usb-redir: " __VA_ARGS__); \
+ } \
+ } while (0)
+
+static void usbredir_log(void *priv, int level, const char *msg)
+{
+ USBRedirDevice *dev = priv;
+
+ if (dev->debug < level) {
+ return;
+ }
+
+ error_report("%s\n", msg);
+}
+
+static void usbredir_log_data(USBRedirDevice *dev, const char *desc,
+ const uint8_t *data, int len)
+{
+ int i, j, n;
+
+ if (dev->debug < usbredirparser_debug_data) {
+ return;
+ }
+
+ for (i = 0; i < len; i += j) {
+ char buf[128];
+
+ n = sprintf(buf, "%s", desc);
+ for (j = 0; j < 8 && i + j < len; j++) {
+ n += sprintf(buf + n, " %02X", data[i + j]);
+ }
+ error_report("%s\n", buf);
+ }
+}
+
+/*
+ * usbredirparser io functions
+ */
+
+static int usbredir_read(void *priv, uint8_t *data, int count)
+{
+ USBRedirDevice *dev = priv;
+
+ if (dev->read_buf_size < count) {
+ count = dev->read_buf_size;
+ }
+
+ memcpy(data, dev->read_buf, count);
+
+ dev->read_buf_size -= count;
+ if (dev->read_buf_size) {
+ dev->read_buf += count;
+ } else {
+ dev->read_buf = NULL;
+ }
+
+ return count;
+}
+
+static int usbredir_write(void *priv, uint8_t *data, int count)
+{
+ USBRedirDevice *dev = priv;
+
+ return qemu_chr_write(dev->cs, data, count);
+}
+
+/*
+ * Async and buffered packets helpers
+ */
+
+static AsyncURB *async_alloc(USBRedirDevice *dev, USBPacket *p)
+{
+ AsyncURB *aurb = (AsyncURB *) qemu_mallocz(sizeof(AsyncURB));
+ aurb->dev = dev;
+ aurb->packet = p;
+ aurb->packet_id = dev->packet_id;
+ QTAILQ_INSERT_TAIL(&dev->asyncq, aurb, next);
+ dev->packet_id++;
+
+ return aurb;
+}
+
+static void async_free(USBRedirDevice *dev, AsyncURB *aurb)
+{
+ QTAILQ_REMOVE(&dev->asyncq, aurb, next);
+ qemu_free(aurb);
+}
+
+static AsyncURB *async_find(USBRedirDevice *dev, uint32_t packet_id)
+{
+ AsyncURB *aurb;
+
+ QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+ if (aurb->packet_id == packet_id) {
+ return aurb;
+ }
+ }
+ ERROR("could not find async urb for packet_id %u\n", packet_id);
+ return NULL;
+}
+
+static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ AsyncURB *aurb;
+
+ QTAILQ_FOREACH(aurb, &dev->asyncq, next) {
+ if (p != aurb->packet) {
+ continue;
+ }
+
+ DPRINTF("async cancel id %u\n", aurb->packet_id);
+ usbredirparser_send_cancel_data_packet(dev->parser, aurb->packet_id);
+ usbredirparser_do_write(dev->parser);
+
+ /* Mark it as dead */
+ aurb->packet = NULL;
+ break;
+ }
+}
+
+static struct buf_packet *bufp_alloc(USBRedirDevice *dev,
+ uint8_t *data, int len, int status, uint8_t ep)
+{
+ struct buf_packet *bufp = qemu_malloc(sizeof(struct buf_packet));
+ bufp->data = data;
+ bufp->len = len;
+ bufp->status = status;
+ QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+ return bufp;
+}
+
+static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp,
+ uint8_t ep)
+{
+ QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
+ free(bufp->data);
+ qemu_free(bufp);
+}
+
+static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep)
+{
+ struct buf_packet *buf, *buf_next;
+
+ QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) {
+ bufp_free(dev, buf, ep);
+ }
+}
+
+/*
+ * USBDevice callbacks
+ */
+
+static void usbredir_handle_reset(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+ DPRINTF("reset device\n");
+ usbredirparser_send_reset(dev->parser);
+ usbredirparser_do_write(dev->parser);
+}
+
+static int usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p,
+ uint8_t ep)
+{
+ int status, len;
+
+ if (!dev->endpoint[EP2I(ep)].iso_started &&
+ !dev->endpoint[EP2I(ep)].iso_error) {
+ struct usb_redir_start_iso_stream_header start_iso = {
+ .endpoint = ep,
+ /* TODO maybe do something with these depending on ep interval? */
+ .pkts_per_urb = 32,
+ .no_urbs = 3,
+ };
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso);
+ usbredirparser_do_write(dev->parser);
+ DPRINTF("iso stream started ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].iso_started = 1;
+ }
+
+ if (ep & USB_DIR_IN) {
+ struct buf_packet *isop;
+
+ isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+ if (isop == NULL) {
+ DPRINTF2("iso-token-in ep %02X, no isop\n", ep);
+ /* Check iso_error for stream errors, otherwise its an underrun */
+ status = dev->endpoint[EP2I(ep)].iso_error;
+ dev->endpoint[EP2I(ep)].iso_error = 0;
+ return usbredir_handle_status(dev, status, 0);
+ }
+ DPRINTF2("iso-token-in ep %02X status %d len %d\n", ep, isop->status,
+ isop->len);
+
+ status = isop->status;
+ if (status != usb_redir_success) {
+ bufp_free(dev, isop, ep);
+ return usbredir_handle_status(dev, status, 0);
+ }
+
+ len = isop->len;
+ if (len > p->len) {
+ ERROR("received iso data is larger then packet ep %02X\n", ep);
+ bufp_free(dev, isop, ep);
+ return USB_RET_NAK;
+ }
+ memcpy(p->data, isop->data, len);
+ bufp_free(dev, isop, ep);
+ return len;
+ } else {
+ /* If the stream was not started because of a pending error don't
+ send the packet to the usb-host */
+ if (dev->endpoint[EP2I(ep)].iso_started) {
+ struct usb_redir_iso_packet_header iso_packet = {
+ .endpoint = ep,
+ .length = p->len
+ };
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet,
+ p->data, p->len);
+ usbredirparser_do_write(dev->parser);
+ }
+ status = dev->endpoint[EP2I(ep)].iso_error;
+ dev->endpoint[EP2I(ep)].iso_error = 0;
+ DPRINTF2("iso-token-out ep %02X status %d len %d\n", ep, status,
+ p->len);
+ return usbredir_handle_status(dev, status, p->len);
+ }
+}
+
+static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep)
+{
+ struct usb_redir_stop_iso_stream_header stop_iso_stream = {
+ .endpoint = ep
+ };
+ if (dev->endpoint[EP2I(ep)].iso_started) {
+ usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream);
+ DPRINTF("iso stream stopped ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].iso_started = 0;
+ }
+ usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p,
+ uint8_t ep)
+{
+ AsyncURB *aurb = async_alloc(dev, p);
+ struct usb_redir_bulk_packet_header bulk_packet;
+
+ DPRINTF("bulk-out ep %02X len %d id %u\n", ep, p->len, aurb->packet_id);
+
+ bulk_packet.endpoint = ep;
+ bulk_packet.length = p->len;
+ bulk_packet.stream_id = 0;
+ aurb->bulk_packet = bulk_packet;
+
+ if (ep & USB_DIR_IN) {
+ usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+ &bulk_packet, NULL, 0);
+ } else {
+ usbredir_log_data(dev, "bulk data out:", p->data, p->len);
+ usbredirparser_send_bulk_packet(dev->parser, aurb->packet_id,
+ &bulk_packet, p->data, p->len);
+ }
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_interrupt_data(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ if (ep & USB_DIR_IN) {
+ /* Input interrupt endpoint, buffered packet input */
+ struct buf_packet *intp;
+ int status, len;
+
+ if (!dev->endpoint[EP2I(ep)].interrupt_started &&
+ !dev->endpoint[EP2I(ep)].interrupt_error) {
+ struct usb_redir_start_interrupt_receiving_header start_int = {
+ .endpoint = ep,
+ };
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_start_interrupt_receiving(dev->parser, 0,
+ &start_int);
+ usbredirparser_do_write(dev->parser);
+ DPRINTF("interrupt recv started ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 1;
+ }
+
+ intp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq);
+ if (intp == NULL) {
+ DPRINTF2("interrupt-token-in ep %02X, no intp\n", ep);
+ /* Check interrupt_error for stream errors */
+ status = dev->endpoint[EP2I(ep)].interrupt_error;
+ dev->endpoint[EP2I(ep)].interrupt_error = 0;
+ return usbredir_handle_status(dev, status, 0);
+ }
+ DPRINTF("interrupt-token-in ep %02X status %d len %d\n", ep,
+ intp->status, intp->len);
+
+ status = intp->status;
+ if (status != usb_redir_success) {
+ bufp_free(dev, intp, ep);
+ return usbredir_handle_status(dev, status, 0);
+ }
+
+ len = intp->len;
+ if (len > p->len) {
+ ERROR("received int data is larger then packet ep %02X\n", ep);
+ bufp_free(dev, intp, ep);
+ return USB_RET_NAK;
+ }
+ memcpy(p->data, intp->data, len);
+ bufp_free(dev, intp, ep);
+ return len;
+ } else {
+ /* Output interrupt endpoint, normal async operation */
+ AsyncURB *aurb = async_alloc(dev, p);
+ struct usb_redir_interrupt_packet_header interrupt_packet;
+
+ DPRINTF("interrupt-out ep %02X len %d id %u\n", ep, p->len,
+ aurb->packet_id);
+
+ interrupt_packet.endpoint = ep;
+ interrupt_packet.length = p->len;
+ aurb->interrupt_packet = interrupt_packet;
+
+ usbredir_log_data(dev, "interrupt data out:", p->data, p->len);
+ usbredirparser_send_interrupt_packet(dev->parser, aurb->packet_id,
+ &interrupt_packet, p->data, p->len);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+ }
+}
+
+static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev,
+ uint8_t ep)
+{
+ struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = {
+ .endpoint = ep
+ };
+ if (dev->endpoint[EP2I(ep)].interrupt_started) {
+ usbredirparser_send_stop_interrupt_receiving(dev->parser, 0,
+ &stop_interrupt_recv);
+ DPRINTF("interrupt recv stopped ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 0;
+ }
+ usbredir_free_bufpq(dev, ep);
+}
+
+static int usbredir_handle_data(USBDevice *udev, USBPacket *p)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ uint8_t ep;
+
+ ep = p->devep;
+ if (p->pid == USB_TOKEN_IN) {
+ ep |= USB_DIR_IN;
+ }
+
+ switch (dev->endpoint[EP2I(ep)].type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ERROR("handle_data called for control transfer on ep %02X\n", ep);
+ return USB_RET_NAK;
+ case USB_ENDPOINT_XFER_ISOC:
+ return usbredir_handle_iso_data(dev, p, ep);
+ case USB_ENDPOINT_XFER_BULK:
+ return usbredir_handle_bulk_data(dev, p, ep);;
+ case USB_ENDPOINT_XFER_INT:
+ return usbredir_handle_interrupt_data(dev, p, ep);;
+ default:
+ ERROR("handle_data ep %02X has unknown type %d\n", ep,
+ dev->endpoint[EP2I(ep)].type);
+ return USB_RET_NAK;
+ }
+}
+
+static int usbredir_set_config(USBRedirDevice *dev, USBPacket *p,
+ int config)
+{
+ struct usb_redir_set_configuration_header set_config;
+ AsyncURB *aurb = async_alloc(dev, p);
+ int i;
+
+ DPRINTF("set config %d id %u\n", config, aurb->packet_id);
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ switch (dev->endpoint[i].type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ usbredir_stop_iso_stream(dev, I2EP(i));
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (i & 0x10) {
+ usbredir_stop_interrupt_receiving(dev, I2EP(i));
+ }
+ break;
+ }
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+
+ set_config.configuration = config;
+ usbredirparser_send_set_configuration(dev->parser, aurb->packet_id,
+ &set_config);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_get_config(USBRedirDevice *dev, USBPacket *p)
+{
+ AsyncURB *aurb = async_alloc(dev, p);
+
+ DPRINTF("get config id %u\n", aurb->packet_id);
+
+ aurb->get = 1;
+ usbredirparser_send_get_configuration(dev->parser, aurb->packet_id);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_set_interface(USBRedirDevice *dev, USBPacket *p,
+ int interface, int alt)
+{
+ struct usb_redir_set_alt_setting_header set_alt;
+ AsyncURB *aurb = async_alloc(dev, p);
+ int i;
+
+ DPRINTF("set interface %d alt %d id %u\n", interface, alt,
+ aurb->packet_id);
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ if (dev->endpoint[i].interface == interface) {
+ switch (dev->endpoint[i].type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ usbredir_stop_iso_stream(dev, I2EP(i));
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (i & 0x10) {
+ usbredir_stop_interrupt_receiving(dev, I2EP(i));
+ }
+ break;
+ }
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+ }
+
+ set_alt.interface = interface;
+ set_alt.alt = alt;
+ usbredirparser_send_set_alt_setting(dev->parser, aurb->packet_id,
+ &set_alt);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_get_interface(USBRedirDevice *dev, USBPacket *p,
+ int interface)
+{
+ struct usb_redir_get_alt_setting_header get_alt;
+ AsyncURB *aurb = async_alloc(dev, p);
+
+ DPRINTF("get interface %d id %u\n", interface, aurb->packet_id);
+
+ get_alt.interface = interface;
+ aurb->get = 1;
+ usbredirparser_send_get_alt_setting(dev->parser, aurb->packet_id,
+ &get_alt);
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+static int usbredir_handle_control(USBDevice *udev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ struct usb_redir_control_packet_header control_packet;
+ AsyncURB *aurb;
+
+ /* Special cases for certain standard device requests */
+ switch (request) {
+ case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+ DPRINTF("set address %d\n", value);
+ dev->dev.addr = value;
+ return 0;
+ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+ return usbredir_set_config(dev, p, value & 0xff);
+ case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+ return usbredir_get_config(dev, p);
+ case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+ return usbredir_set_interface(dev, p, index, value);
+ case InterfaceRequest | USB_REQ_GET_INTERFACE:
+ return usbredir_get_interface(dev, p, index);
+ }
+
+ /* "Normal" ctrl requests */
+ aurb = async_alloc(dev, p);
+
+ /* Note request is (bRequestType << 8) | bRequest */
+ DPRINTF("ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %u\n",
+ request >> 8, request & 0xff, value, index, length,
+ aurb->packet_id);
+
+ control_packet.request = request & 0xFF;
+ control_packet.requesttype = request >> 8;
+ control_packet.endpoint = control_packet.requesttype & USB_DIR_IN;
+ control_packet.value = value;
+ control_packet.index = index;
+ control_packet.length = length;
+ aurb->control_packet = control_packet;
+
+ if (control_packet.requesttype & USB_DIR_IN) {
+ usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+ &control_packet, NULL, 0);
+ } else {
+ usbredir_log_data(dev, "ctrl data out:", data, length);
+ usbredirparser_send_control_packet(dev->parser, aurb->packet_id,
+ &control_packet, data, length);
+ }
+ usbredirparser_do_write(dev->parser);
+ return USB_RET_ASYNC;
+}
+
+/*
+ * Close events can be triggered by usbredirparser_do_write which gets called
+ * from within the USBDevice data / control packet callbacks and doing a
+ * usb_detach from within these callbacks is not a good idea.
+ *
+ * So we use a bh handler to take care of close events. We also handle
+ * open events from this callback to make sure that a close directly followed
+ * by an open gets handled in the right order.
+ */
+static void usbredir_open_close_bh(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+
+ usbredir_device_disconnect(dev);
+
+ if (dev->parser) {
+ usbredirparser_destroy(dev->parser);
+ dev->parser = NULL;
+ }
+
+ if (dev->cs->opened) {
+ dev->parser = qemu_oom_check(usbredirparser_create());
+ dev->parser->priv = dev;
+ dev->parser->log_func = usbredir_log;
+ dev->parser->read_func = usbredir_read;
+ dev->parser->write_func = usbredir_write;
+ dev->parser->device_connect_func = usbredir_device_connect;
+ dev->parser->device_disconnect_func = usbredir_device_disconnect;
+ dev->parser->interface_info_func = usbredir_interface_info;
+ dev->parser->ep_info_func = usbredir_ep_info;
+ dev->parser->configuration_status_func = usbredir_configuration_status;
+ dev->parser->alt_setting_status_func = usbredir_alt_setting_status;
+ dev->parser->iso_stream_status_func = usbredir_iso_stream_status;
+ dev->parser->interrupt_receiving_status_func =
+ usbredir_interrupt_receiving_status;
+ dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status;
+ dev->parser->control_packet_func = usbredir_control_packet;
+ dev->parser->bulk_packet_func = usbredir_bulk_packet;
+ dev->parser->iso_packet_func = usbredir_iso_packet;
+ dev->parser->interrupt_packet_func = usbredir_interrupt_packet;
+ dev->read_buf = NULL;
+ dev->read_buf_size = 0;
+ usbredirparser_init(dev->parser, VERSION, NULL, 0, 0);
+ usbredirparser_do_write(dev->parser);
+ }
+}
+
+static void usbredir_do_attach(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+
+ usb_device_attach(&dev->dev);
+}
+
+/*
+ * chardev callbacks
+ */
+
+static int usbredir_chardev_can_read(void *opaque)
+{
+ USBRedirDevice *dev = opaque;
+
+ if (dev->parser) {
+ /* usbredir_parser_do_read will consume *all* data we give it */
+ return 1024 * 1024;
+ } else {
+ /* usbredir_open_close_bh hasn't handled the open event yet */
+ return 0;
+ }
+}
+
+static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size)
+{
+ USBRedirDevice *dev = opaque;
+
+ /* No recursion allowed! */
+ assert(dev->read_buf == NULL);
+
+ dev->read_buf = buf;
+ dev->read_buf_size = size;
+
+ usbredirparser_do_read(dev->parser);
+ /* Send any acks, etc. which may be queued now */
+ usbredirparser_do_write(dev->parser);
+}
+
+static void usbredir_chardev_event(void *opaque, int event)
+{
+ USBRedirDevice *dev = opaque;
+
+ switch (event) {
+ case CHR_EVENT_OPENED:
+ case CHR_EVENT_CLOSED:
+ qemu_bh_schedule(dev->open_close_bh);
+ break;
+ }
+}
+
+/*
+ * init + destroy
+ */
+
+static int usbredir_initfn(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ int i;
+
+ if (dev->cs == NULL) {
+ qerror_report(QERR_MISSING_PARAMETER, "chardev");
+ return -1;
+ }
+
+ dev->open_close_bh = qemu_bh_new(usbredir_open_close_bh, dev);
+ dev->attach_timer = qemu_new_timer_ms(vm_clock, usbredir_do_attach, dev);
+
+ QTAILQ_INIT(&dev->asyncq);
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ QTAILQ_INIT(&dev->endpoint[i].bufpq);
+ }
+
+ /* We'll do the attach once we receive the speed from the usb-host */
+ udev->auto_attach = 0;
+
+ qemu_chr_add_handlers(dev->cs, usbredir_chardev_can_read,
+ usbredir_chardev_read, usbredir_chardev_event, dev);
+
+ return 0;
+}
+
+static void usbredir_cleanup_device_queues(USBRedirDevice *dev)
+{
+ AsyncURB *aurb, *next_aurb;
+ int i;
+
+ QTAILQ_FOREACH_SAFE(aurb, &dev->asyncq, next, next_aurb) {
+ async_free(dev, aurb);
+ }
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ usbredir_free_bufpq(dev, I2EP(i));
+ }
+}
+
+static void usbredir_handle_destroy(USBDevice *udev)
+{
+ USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+
+ qemu_chr_close(dev->cs);
+ /* Note must be done after qemu_chr_close, as that causes a close event */
+ qemu_bh_delete(dev->open_close_bh);
+
+ qemu_del_timer(dev->attach_timer);
+ qemu_free_timer(dev->attach_timer);
+
+ usbredir_cleanup_device_queues(dev);
+
+ if (dev->parser) {
+ usbredirparser_destroy(dev->parser);
+ }
+}
+
+/*
+ * usbredirparser packet complete callbacks
+ */
+
+static int usbredir_handle_status(USBRedirDevice *dev,
+ int status, int actual_len)
+{
+ switch (status) {
+ case usb_redir_success:
+ return actual_len;
+ case usb_redir_stall:
+ return USB_RET_STALL;
+ case usb_redir_cancelled:
+ WARNING("returning cancelled packet to HC?\n");
+ case usb_redir_inval:
+ case usb_redir_ioerror:
+ case usb_redir_timeout:
+ default:
+ return USB_RET_NAK;
+ }
+}
+
+static void usbredir_device_connect(void *priv,
+ struct usb_redir_device_connect_header *device_connect)
+{
+ USBRedirDevice *dev = priv;
+
+ switch (device_connect->speed) {
+ case usb_redir_speed_low:
+ DPRINTF("attaching low speed device\n");
+ dev->dev.speed = USB_SPEED_LOW;
+ break;
+ case usb_redir_speed_full:
+ DPRINTF("attaching full speed device\n");
+ dev->dev.speed = USB_SPEED_FULL;
+ break;
+ case usb_redir_speed_high:
+ DPRINTF("attaching high speed device\n");
+ dev->dev.speed = USB_SPEED_HIGH;
+ break;
+ case usb_redir_speed_super:
+ DPRINTF("attaching super speed device\n");
+ dev->dev.speed = USB_SPEED_SUPER;
+ break;
+ default:
+ DPRINTF("attaching unknown speed device, assuming full speed\n");
+ dev->dev.speed = USB_SPEED_FULL;
+ }
+ dev->dev.speedmask = (1 << dev->dev.speed);
+ qemu_mod_timer(dev->attach_timer, dev->next_attach_time);
+}
+
+static void usbredir_device_disconnect(void *priv)
+{
+ USBRedirDevice *dev = priv;
+
+ /* Stop any pending attaches */
+ qemu_del_timer(dev->attach_timer);
+
+ if (dev->dev.attached) {
+ usb_device_detach(&dev->dev);
+ usbredir_cleanup_device_queues(dev);
+ /*
+ * Delay next usb device attach to give the guest a chance to see
+ * see the detach / attach in case of quick close / open succession
+ */
+ dev->next_attach_time = qemu_get_clock_ms(vm_clock) + 200;
+ }
+}
+
+static void usbredir_interface_info(void *priv,
+ struct usb_redir_interface_info_header *interface_info)
+{
+ /* The intention is to allow specifying acceptable interface classes
+ for redirection on the cmdline and in the future verify this here,
+ and disconnect (or never connect) the device if a not accepted
+ interface class is detected */
+}
+
+static void usbredir_ep_info(void *priv,
+ struct usb_redir_ep_info_header *ep_info)
+{
+ USBRedirDevice *dev = priv;
+ int i;
+
+ for (i = 0; i < MAX_ENDPOINTS; i++) {
+ dev->endpoint[i].type = ep_info->type[i];
+ dev->endpoint[i].interval = ep_info->interval[i];
+ dev->endpoint[i].interface = ep_info->interface[i];
+ if (dev->endpoint[i].type != usb_redir_type_invalid) {
+ DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i),
+ dev->endpoint[i].type, dev->endpoint[i].interface);
+ }
+ }
+}
+
+static void usbredir_configuration_status(void *priv, uint32_t id,
+ struct usb_redir_configuration_status_header *config_status)
+{
+ USBRedirDevice *dev = priv;
+ AsyncURB *aurb;
+ int len = 0;
+
+ DPRINTF("set config status %d config %d id %u\n", config_status->status,
+ config_status->configuration, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+ if (aurb->packet) {
+ if (aurb->get) {
+ dev->dev.data_buf[0] = config_status->configuration;
+ len = 1;
+ }
+ aurb->packet->len =
+ usbredir_handle_status(dev, config_status->status, len);
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+}
+
+static void usbredir_alt_setting_status(void *priv, uint32_t id,
+ struct usb_redir_alt_setting_status_header *alt_setting_status)
+{
+ USBRedirDevice *dev = priv;
+ AsyncURB *aurb;
+ int len = 0;
+
+ DPRINTF("alt status %d intf %d alt %d id: %u\n",
+ alt_setting_status->status,
+ alt_setting_status->interface,
+ alt_setting_status->alt, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+ if (aurb->packet) {
+ if (aurb->get) {
+ dev->dev.data_buf[0] = alt_setting_status->alt;
+ len = 1;
+ }
+ aurb->packet->len =
+ usbredir_handle_status(dev, alt_setting_status->status, len);
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+}
+
+static void usbredir_iso_stream_status(void *priv, uint32_t id,
+ struct usb_redir_iso_stream_status_header *iso_stream_status)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = iso_stream_status->endpoint;
+
+ DPRINTF("iso status %d ep %02X id %u\n", iso_stream_status->status,
+ ep, id);
+
+ dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status;
+ if (iso_stream_status->status == usb_redir_stall) {
+ DPRINTF("iso stream stopped by peer ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].iso_started = 0;
+ }
+}
+
+static void usbredir_interrupt_receiving_status(void *priv, uint32_t id,
+ struct usb_redir_interrupt_receiving_status_header
+ *interrupt_receiving_status)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = interrupt_receiving_status->endpoint;
+
+ DPRINTF("interrupt recv status %d ep %02X id %u\n",
+ interrupt_receiving_status->status, ep, id);
+
+ dev->endpoint[EP2I(ep)].interrupt_error =
+ interrupt_receiving_status->status;
+ if (interrupt_receiving_status->status == usb_redir_stall) {
+ DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].interrupt_started = 0;
+ }
+}
+
+static void usbredir_bulk_streams_status(void *priv, uint32_t id,
+ struct usb_redir_bulk_streams_status_header *bulk_streams_status)
+{
+}
+
+static void usbredir_control_packet(void *priv, uint32_t id,
+ struct usb_redir_control_packet_header *control_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ int len = control_packet->length;
+ AsyncURB *aurb;
+
+ DPRINTF("ctrl-in status %d len %d id %u\n", control_packet->status,
+ len, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ free(data);
+ return;
+ }
+
+ aurb->control_packet.status = control_packet->status;
+ aurb->control_packet.length = control_packet->length;
+ if (memcmp(&aurb->control_packet, control_packet,
+ sizeof(*control_packet))) {
+ ERROR("return control packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ len = usbredir_handle_status(dev, control_packet->status, len);
+ if (len > 0) {
+ usbredir_log_data(dev, "ctrl data in:", data, data_len);
+ if (data_len <= sizeof(dev->dev.data_buf)) {
+ memcpy(dev->dev.data_buf, data, data_len);
+ } else {
+ ERROR("ctrl buffer too small (%d > %zu)\n",
+ data_len, sizeof(dev->dev.data_buf));
+ len = USB_RET_STALL;
+ }
+ }
+ aurb->packet->len = len;
+ usb_generic_async_ctrl_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ free(data);
+}
+
+static void usbredir_bulk_packet(void *priv, uint32_t id,
+ struct usb_redir_bulk_packet_header *bulk_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = bulk_packet->endpoint;
+ int len = bulk_packet->length;
+ AsyncURB *aurb;
+
+ DPRINTF("bulk-in status %d ep %02X len %d id %u\n", bulk_packet->status,
+ ep, len, id);
+
+ aurb = async_find(dev, id);
+ if (!aurb) {
+ free(data);
+ return;
+ }
+
+ if (aurb->bulk_packet.endpoint != bulk_packet->endpoint ||
+ aurb->bulk_packet.stream_id != bulk_packet->stream_id) {
+ ERROR("return bulk packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ len = usbredir_handle_status(dev, bulk_packet->status, len);
+ if (len > 0) {
+ usbredir_log_data(dev, "bulk data in:", data, data_len);
+ if (data_len <= aurb->packet->len) {
+ memcpy(aurb->packet->data, data, data_len);
+ } else {
+ ERROR("bulk buffer too small (%d > %d)\n", data_len,
+ aurb->packet->len);
+ len = USB_RET_STALL;
+ }
+ }
+ aurb->packet->len = len;
+ usb_packet_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ free(data);
+}
+
+static void usbredir_iso_packet(void *priv, uint32_t id,
+ struct usb_redir_iso_packet_header *iso_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = iso_packet->endpoint;
+
+ DPRINTF2("iso-in status %d ep %02X len %d id %u\n", iso_packet->status, ep,
+ data_len, id);
+
+ if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) {
+ ERROR("received iso packet for non iso endpoint %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ if (dev->endpoint[EP2I(ep)].iso_started == 0) {
+ DPRINTF("received iso packet for non started stream ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ /* bufp_alloc also adds the packet to the ep queue */
+ bufp_alloc(dev, data, data_len, iso_packet->status, ep);
+}
+
+static void usbredir_interrupt_packet(void *priv, uint32_t id,
+ struct usb_redir_interrupt_packet_header *interrupt_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = interrupt_packet->endpoint;
+
+ DPRINTF("interrupt-in status %d ep %02X len %d id %u\n",
+ interrupt_packet->status, ep, data_len, id);
+
+ if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) {
+ ERROR("received int packet for non interrupt endpoint %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ if (ep & USB_DIR_IN) {
+ if (dev->endpoint[EP2I(ep)].interrupt_started == 0) {
+ DPRINTF("received int packet while not started ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ /* bufp_alloc also adds the packet to the ep queue */
+ bufp_alloc(dev, data, data_len, interrupt_packet->status, ep);
+ } else {
+ int len = interrupt_packet->length;
+
+ AsyncURB *aurb = async_find(dev, id);
+ if (!aurb) {
+ return;
+ }
+
+ if (aurb->interrupt_packet.endpoint != interrupt_packet->endpoint) {
+ ERROR("return int packet mismatch, please report this!\n");
+ len = USB_RET_NAK;
+ }
+
+ if (aurb->packet) {
+ aurb->packet->len = usbredir_handle_status(dev,
+ interrupt_packet->status, len);
+ usb_packet_complete(&dev->dev, aurb->packet);
+ }
+ async_free(dev, aurb);
+ }
+}
+
+static struct USBDeviceInfo usbredir_dev_info = {
+ .product_desc = "USB Redirection Device",
+ .qdev.name = "usb-redir",
+ .qdev.size = sizeof(USBRedirDevice),
+ .init = usbredir_initfn,
+ .handle_destroy = usbredir_handle_destroy,
+ .handle_packet = usb_generic_handle_packet,
+ .cancel_packet = usbredir_cancel_packet,
+ .handle_reset = usbredir_handle_reset,
+ .handle_data = usbredir_handle_data,
+ .handle_control = usbredir_handle_control,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_CHR("chardev", USBRedirDevice, cs),
+ DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+};
+
+static void usbredir_register_devices(void)
+{
+ usb_qdev_register(&usbredir_dev_info);
+}
+device_init(usbredir_register_devices);
--
1.7.1