[Qemu-devel] [PATCH] target-cris/opcode-cris.h: rename REG_PC/SP to CRIS_REG_PC/SP

[Peter Maydell]

The REG_PC constant used in opcode-cris.h can clash with a
similar define in system include files. In particular the
Ubuntu Lucid SPARC signal.h will define REG_PC, and since
qemu-common.h now includes signal.h this was causing compile
failures. Rename the constants to avoid this issue.
(NB that REG_SP is not actually used within QEMU.)

Signed-off-by: Peter Maydell <address@hidden>
---
You might recall that we had to make a similar renaming in the
linux-user code back in April for the same reason.

 target-cris/opcode-cris.h |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/target-cris/opcode-cris.h b/target-cris/opcode-cris.h
index 8d4749d..779d4aa 100644
--- a/target-cris/opcode-cris.h
+++ b/target-cris/opcode-cris.h
@@ -29,8 +29,8 @@ along with this program; if not, see 
<http://www.gnu.org/licenses/>.  */
 
 /* Registers.  */
 #define MAX_REG (15)
-#define REG_SP (14)
-#define REG_PC (15)
+#define CRIS_REG_SP (14)
+#define CRIS_REG_PC (15)
 
 /* CPU version control of disassembly and assembly of instructions.
    May affect how the instruction is assembled, at least the size of
@@ -138,7 +138,7 @@ extern const struct cris_cond15 cris_conds15[];
 
 #define BDAP_INDIR_OPCODE (BDAP_INDIR_HIGH * 0x0100 + BDAP_INDIR_LOW)
 #define BDAP_INDIR_Z_BITS (BDAP_INDIR_HIGH_Z * 0x100 + BDAP_INDIR_LOW_Z)
-#define BDAP_PC_LOW      (BDAP_INDIR_LOW + REG_PC)
+#define BDAP_PC_LOW      (BDAP_INDIR_LOW + CRIS_REG_PC)
 #define BDAP_INCR_HIGH   (BDAP_INDIR_HIGH + AUTOINCR_BIT)
 
 /* No prefix must have this code for its "match" bits in the
@@ -192,16 +192,16 @@ extern const char *const cris_cc_strings[];
 #define JUMP_INDIR_OPCODE (0x0930)
 #define JUMP_INDIR_Z_BITS (0xf2c0)
 #define JUMP_PC_INCR_OPCODE \
- (JUMP_INDIR_OPCODE + AUTOINCR_BIT * 0x0100 + REG_PC)
+ (JUMP_INDIR_OPCODE + AUTOINCR_BIT * 0x0100 + CRIS_REG_PC)
 
 #define MOVE_M_TO_PREG_OPCODE 0x0a30
 #define MOVE_M_TO_PREG_ZBITS 0x01c0
 
 /* BDAP.D N,PC.  */
 #define MOVE_PC_INCR_OPCODE_PREFIX \
- (((BDAP_INCR_HIGH | (REG_PC << 4)) << 8) | BDAP_PC_LOW | (2 << 4))
+ (((BDAP_INCR_HIGH | (CRIS_REG_PC << 4)) << 8) | BDAP_PC_LOW | (2 << 4))
 #define MOVE_PC_INCR_OPCODE_SUFFIX \
- (MOVE_M_TO_PREG_OPCODE | REG_PC | (AUTOINCR_BIT << 8))
+ (MOVE_M_TO_PREG_OPCODE | CRIS_REG_PC | (AUTOINCR_BIT << 8))
 
 #define JUMP_PC_INCR_OPCODE_V32 (0x0DBF)
 
-- 
1.7.4.1