[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging
From: |
Andreas Färber |
Subject: |
Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode |
Date: |
Mon, 12 Sep 2011 17:45:01 +0200 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.22) Gecko/20110907 SUSE/3.1.14 Thunderbird/3.1.14 |
Am 12.09.2011 17:33, schrieb Jan Kiszka:
> On 2011-09-12 17:20, Alexander Graf wrote:
>> Jan Kiszka wrote:
>>> Most VGA memory access modes require MMIO handling as they demand weird
>>> logic to get a byte from or into the video RAM. However, there is one
>>> exception: chain 4 mode with all memory planes enabled for writing. This
>>> mode actually allows lineary mapping, which can then be combined with
>>> dirty logging to accelerate KVM.
>>>
>>> This patch accelerates specifically VBE accesses like they are used by
>>> grub in graphical mode. Not only the standard VGA adapter benefits from
>>> this, also vmware and spice in VGA mode.
>>>
>>> CC: Gerd Hoffmann <address@hidden>
>>> CC: Avi Kivity <address@hidden>
>>> Signed-off-by: Jan Kiszka <address@hidden>
>>>
>> [...]
>>
>>> +static void vga_update_memory_access(VGACommonState *s)
>>> +{
>>> + MemoryRegion *region, *old_region = s->chain4_alias;
>>> + target_phys_addr_t base, offset, size;
>>> +
>>> + s->chain4_alias = NULL;
>>> +
>>> + if ((s->sr[0x02] & 0xf) == 0xf && s->sr[0x04] & 0x08) {
>>> + offset = 0;
>>> + switch ((s->gr[6] >> 2) & 3) {
>>> + case 0:
>>> + base = 0xa0000;
>>> + size = 0x20000;
>>> + break;
>>> + case 1:
>>> + base = 0xa0000;
>>> + size = 0x10000;
>>> + offset = s->bank_offset;
>>> + break;
>>> + case 2:
>>> + base = 0xb0000;
>>> + size = 0x8000;
>>> + break;
>>> + case 3:
>>> + base = 0xb8000;
>>> + size = 0x8000;
>>> + break;
>>> + }
>>> + region = g_malloc(sizeof(*region));
>>> + memory_region_init_alias(region, "vga.chain4", &s->vram, offset,
>>> size);
>>> + memory_region_add_subregion_overlap(s->legacy_address_space, base,
>>> + region, 2);
>>>
>> This one eventually gives me the following in info mtree with -M g3beige
>> on qemu-system-ppc:
>>
>> (qemu) info mtree
>> memory
>> system addr 00000000 off 00000000 size 7fffffffffffffff
>> -vga.chain4 addr 000a0000 off 00000000 size 10000
>> -macio addr 80880000 off 00000000 size 80000
>> --macio-nvram addr 00060000 off 00000000 size 20000
>> --pmac-ide addr 00020000 off 00000000 size 1000
>> --cuda addr 00016000 off 00000000 size 2000
>> --escc-bar addr 00013000 off 00000000 size 40
>> --dbdma addr 00008000 off 00000000 size 1000
>> --heathrow-pic addr 00000000 off 00000000 size 1000
>> -vga.rom addr 80800000 off 00000000 size 10000
>> -vga.vram addr 80000000 off 00000000 size 800000
>> -vga-lowmem addr 800a0000 off 00000000 size 20000
>> -escc addr 80013000 off 00000000 size 40
>> -isa-mmio addr fe000000 off 00000000 size 200000
>> I/O
>> io addr 00000000 off 00000000 size 10000
>> -cmd646-bmdma addr 00000700 off 00000000 size 10
>> --cmd646-bmdma-ioport addr 0000000c off 00000000 size 4
>> --cmd646-bmdma-bus addr 00000008 off 00000000 size 4
>> --cmd646-bmdma-ioport addr 00000004 off 00000000 size 4
>> --cmd646-bmdma-bus addr 00000000 off 00000000 size 4
>> -cmd646-cmd addr 00000680 off 00000000 size 4
>> -cmd646-data addr 00000600 off 00000000 size 8
>> -cmd646-cmd addr 00000580 off 00000000 size 4
>> -cmd646-data addr 00000500 off 00000000 size 8
>> -ne2000 addr 00000400 off 00000000 size 100
>>
>> This ends up overmapping 0xa0000, effectively overwriting kernel data.
>> If I #if 0 the offending chunk out, everything is fine. I would assume
>> that chain4 really needs to be inside of lowmem? No idea about VGA, but
>> I'm sure you know what's going on :).
> Does this help?
>
> diff --git a/hw/vga.c b/hw/vga.c
> index 125fb29..0a0c5a6 100644
> --- a/hw/vga.c
> +++ b/hw/vga.c
> @@ -181,6 +181,7 @@ static void vga_update_memory_access(VGACommonState *s)
> size = 0x8000;
> break;
> }
> + base += isa_mem_base;
> region = g_malloc(sizeof(*region));
> memory_region_init_alias(region, "vga.chain4", &s->vram, offset,
> size);
> memory_region_add_subregion_overlap(s->legacy_address_space, base,
No longer oopses, but the screen looks chaotic now (black bar at bottom,
part of contents at top etc.).
Andreas
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Alexander Graf, 2011/09/12
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/12
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode,
Andreas Färber <=
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/12
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/12
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Alexander Graf, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Alexander Graf, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Andreas Färber, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Alexander Graf, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Alexander Graf, 2011/09/13
- Re: [Qemu-devel] [PATCH v3 5/6] vga: Use linear mapping + dirty logging in chain 4 memory access mode, Jan Kiszka, 2011/09/13