qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v12 4/5] hmp/qmp: add block_set_io_throttle


From: Zhi Yong Wu
Subject: [Qemu-devel] [PATCH v12 4/5] hmp/qmp: add block_set_io_throttle
Date: Thu, 3 Nov 2011 16:57:28 +0800

Signed-off-by: Zhi Yong Wu <address@hidden>
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 block.c          |   15 +++++++++++++
 blockdev.c       |   59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 blockdev.h       |    2 +
 hmp-commands.hx  |   15 +++++++++++++
 hmp.c            |   10 +++++++++
 qapi-schema.json |   16 +++++++++++++-
 qerror.c         |    4 +++
 qerror.h         |    3 ++
 qmp-commands.hx  |   53 +++++++++++++++++++++++++++++++++++++++++++++++-
 9 files changed, 175 insertions(+), 2 deletions(-)

diff --git a/block.c b/block.c
index b2af48f..ed6fe20 100644
--- a/block.c
+++ b/block.c
@@ -1971,6 +1971,21 @@ BlockInfoList *qmp_query_block(Error **errp)
                 info->value->inserted->has_backing_file = true;
                 info->value->inserted->backing_file = 
g_strdup(bs->backing_file);
             }
+
+            if (bs->io_limits_enabled) {
+                info->value->inserted->bps =
+                               bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
+                info->value->inserted->bps_rd =
+                               bs->io_limits.bps[BLOCK_IO_LIMIT_READ];
+                info->value->inserted->bps_wr =
+                               bs->io_limits.bps[BLOCK_IO_LIMIT_WRITE];
+                info->value->inserted->iops =
+                               bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
+                info->value->inserted->iops_rd =
+                               bs->io_limits.iops[BLOCK_IO_LIMIT_READ];
+                info->value->inserted->iops_wr =
+                               bs->io_limits.iops[BLOCK_IO_LIMIT_WRITE];
+            }
         }
 
         /* XXX: waiting for the qapi to support GSList */
diff --git a/blockdev.c b/blockdev.c
index 651828c..95d1faa 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -757,6 +757,65 @@ int do_change_block(Monitor *mon, const char *device,
     return monitor_read_bdrv_key_start(mon, bs, NULL, NULL);
 }
 
+/* throttling disk I/O limits */
+int do_block_set_io_throttle(Monitor *mon,
+                       const QDict *qdict, QObject **ret_data)
+{
+    BlockIOLimit io_limits;
+    const char *devname = qdict_get_str(qdict, "device");
+    BlockDriverState *bs;
+
+    io_limits.bps[BLOCK_IO_LIMIT_TOTAL]
+                        = qdict_get_try_int(qdict, "bps", -1);
+    io_limits.bps[BLOCK_IO_LIMIT_READ]
+                        = qdict_get_try_int(qdict, "bps_rd", -1);
+    io_limits.bps[BLOCK_IO_LIMIT_WRITE]
+                        = qdict_get_try_int(qdict, "bps_wr", -1);
+    io_limits.iops[BLOCK_IO_LIMIT_TOTAL]
+                        = qdict_get_try_int(qdict, "iops", -1);
+    io_limits.iops[BLOCK_IO_LIMIT_READ]
+                        = qdict_get_try_int(qdict, "iops_rd", -1);
+    io_limits.iops[BLOCK_IO_LIMIT_WRITE]
+                        = qdict_get_try_int(qdict, "iops_wr", -1);
+
+    bs = bdrv_find(devname);
+    if (!bs) {
+        qerror_report(QERR_DEVICE_NOT_FOUND, devname);
+        return -1;
+    }
+
+    if ((io_limits.bps[BLOCK_IO_LIMIT_TOTAL] == -1)
+        || (io_limits.bps[BLOCK_IO_LIMIT_READ] == -1)
+        || (io_limits.bps[BLOCK_IO_LIMIT_WRITE] == -1)
+        || (io_limits.iops[BLOCK_IO_LIMIT_TOTAL] == -1)
+        || (io_limits.iops[BLOCK_IO_LIMIT_READ] == -1)
+        || (io_limits.iops[BLOCK_IO_LIMIT_WRITE] == -1)) {
+        qerror_report(QERR_MISSING_PARAMETER,
+                      "bps/bps_rd/bps_wr/iops/iops_rd/iops_wr");
+        return -1;
+    }
+
+    if (!do_check_io_limits(&io_limits)) {
+        qerror_report(QERR_INVALID_PARAMETER_COMBINATION);
+        return -1;
+    }
+
+    bs->io_limits = io_limits;
+    bs->slice_time = BLOCK_IO_SLICE_TIME;
+
+    if (!bs->io_limits_enabled && bdrv_io_limits_enabled(bs)) {
+        bdrv_io_limits_enable(bs);
+    } else if (bs->io_limits_enabled && !bdrv_io_limits_enabled(bs)) {
+        bdrv_io_limits_disable(bs);
+    } else {
+        if (bs->block_timer) {
+            qemu_mod_timer(bs->block_timer, qemu_get_clock_ns(vm_clock));
+        }
+    }
+
+    return 0;
+}
+
 int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
 {
     const char *id = qdict_get_str(qdict, "id");
diff --git a/blockdev.h b/blockdev.h
index 3587786..1b48a75 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -63,6 +63,8 @@ int do_block_set_passwd(Monitor *mon, const QDict *qdict, 
QObject **ret_data);
 int do_change_block(Monitor *mon, const char *device,
                     const char *filename, const char *fmt);
 int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
+int do_block_set_io_throttle(Monitor *mon,
+                             const QDict *qdict, QObject **ret_data);
 int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data);
 int do_block_resize(Monitor *mon, const QDict *qdict, QObject **ret_data);
 
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 089c1ac..48f3c21 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1207,6 +1207,21 @@ ETEXI
     },
 
 STEXI
address@hidden block_set_io_throttle @var{device} @var{bps} @var{bps_rd} 
@var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
address@hidden block_set_io_throttle
+Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} 
@var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+ETEXI
+
+    {
+        .name       = "block_set_io_throttle",
+        .args_type  = 
"device:B,bps:i?,bps_rd:i?,bps_wr:i?,iops:i?,iops_rd:i?,iops_wr:i?",
+        .params     = "device [bps] [bps_rd] [bps_wr] [iops] [iops_rd] 
[iops_wr]",
+        .help       = "change I/O throttle limits for a block drive",
+        .user_print = monitor_user_noop,
+        .mhandler.cmd_new = do_block_set_io_throttle,
+    },
+
+STEXI
 @item block_passwd @var{device} @var{password}
 @findex block_passwd
 Set the encrypted device @var{device} password to @var{password}
diff --git a/hmp.c b/hmp.c
index 443d3a7..dfab7ad 100644
--- a/hmp.c
+++ b/hmp.c
@@ -216,6 +216,16 @@ void hmp_info_block(Monitor *mon)
                            info->value->inserted->ro,
                            info->value->inserted->drv,
                            info->value->inserted->encrypted);
+
+            monitor_printf(mon, " bps=%" PRId64 " bps_rd=%" PRId64
+                            " bps_wr=%" PRId64 " iops=%" PRId64
+                            " iops_rd=%" PRId64 " iops_wr=%" PRId64,
+                            info->value->inserted->bps,
+                            info->value->inserted->bps_rd,
+                            info->value->inserted->bps_wr,
+                            info->value->inserted->iops,
+                            info->value->inserted->iops_rd,
+                            info->value->inserted->iops_wr);
         } else {
             monitor_printf(mon, " [not inserted]");
         }
diff --git a/qapi-schema.json b/qapi-schema.json
index cb1ba77..734076b 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -370,13 +370,27 @@
 #
 # @encrypted: true if the backing device is encrypted
 #
+# @bps:  #optional if total throughput limit in bytes per second is specified
+#
+# @bps_rd:  #optional if read throughput limit in bytes per second is specified
+#
+# @bps_wr:  #optional if write throughput limit in bytes per second is 
specified
+#
+# @iops:  #optional if total I/O operations per second is specified
+#
+# @iops_rd:  #optional if read I/O operations per second is specified
+#
+# @iops_wr:  #optional if write I/O operations per second is specified
+#
 # Since: 0.14.0
 #
 # Notes: This interface is only found in @BlockInfo.
 ##
 { 'type': 'BlockDeviceInfo',
   'data': { 'file': 'str', 'ro': 'bool', 'drv': 'str',
-            '*backing_file': 'str', 'encrypted': 'bool' } }
+            '*backing_file': 'str', 'encrypted': 'bool',
+            'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} }
 
 ##
 # @BlockDeviceIoStatus:
diff --git a/qerror.c b/qerror.c
index 4b48b39..807fb55 100644
--- a/qerror.c
+++ b/qerror.c
@@ -238,6 +238,10 @@ static const QErrorStringTable qerror_table[] = {
         .error_fmt = QERR_QGA_COMMAND_FAILED,
         .desc      = "Guest agent command failed, error was '%(message)'",
     },
+    {
+        .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+        .desc      = "Invalid paramter combination",
+    },
     {}
 };
 
diff --git a/qerror.h b/qerror.h
index d4bfcfd..777a36a 100644
--- a/qerror.h
+++ b/qerror.h
@@ -198,4 +198,7 @@ QError *qobject_to_qerror(const QObject *obj);
 #define QERR_QGA_COMMAND_FAILED \
     "{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
 
+#define QERR_INVALID_PARAMETER_COMBINATION \
+    "{ 'class': 'InvalidParameterCombination', 'data': {} }"
+
 #endif /* QERROR_H */
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 97975a5..cdc3c18 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -851,6 +851,44 @@ Example:
 EQMP
 
     {
+        .name       = "block_set_io_throttle",
+        .args_type  = 
"device:B,bps:i?,bps_rd:i?,bps_wr:i?,iops:i?,iops_rd:i?,iops_wr:i?",
+        .params     = "device [bps] [bps_rd] [bps_wr] [iops] [iops_rd] 
[iops_wr]",
+        .help       = "change I/O throttle limits for a block drive",
+        .user_print = monitor_user_noop,
+        .mhandler.cmd_new = do_block_set_io_throttle,
+    },
+
+SQMP
+block_set_io_throttle
+------------
+
+Change I/O throttle limits for a block drive.
+
+Arguments:
+
+- "device": device name (json-string)
+- "bps":  total throughput limit in bytes per second(json-int, optional)
+- "bps_rd":  read throughput limit in bytes per second(json-int, optional)
+- "bps_wr":  read throughput limit in bytes per second(json-int, optional)
+- "iops":  total I/O operations per second(json-int, optional)
+- "iops_rd":  read I/O operations per second(json-int, optional)
+- "iops_wr":  write I/O operations per second(json-int, optional)
+
+Example:
+
+-> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
+                                               "bps": "1000000",
+                                               "bps_rd": "0",
+                                               "bps_wr": "0",
+                                               "iops": "0",
+                                               "iops_rd": "0",
+                                               "iops_wr": "0" } }
+<- { "return": {} }
+
+EQMP
+
+    {
         .name       = "set_password",
         .args_type  = "protocol:s,password:s,connected:s?",
         .params     = "protocol password action-if-connected",
@@ -1152,6 +1190,13 @@ Each json-object contain the following:
                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
          - "backing_file": backing file name (json-string, optional)
          - "encrypted": true if encrypted, false otherwise (json-bool)
+         - "bps": limit total bytes per second (json-int)
+         - "bps_rd": limit read bytes per second (json-int)
+         - "bps_wr": limit write bytes per second (json-int)
+         - "iops": limit total I/O operations per second (json-int)
+         - "iops_rd": limit read operations per second (json-int)
+         - "iops_wr": limit write operations per second (json-int)
+
 - "io-status": I/O operation status, only present if the device supports it
                and the VM is configured to stop on errors. It's always reset
                to "ok" when the "cont" command is issued (json_string, 
optional)
@@ -1171,7 +1216,13 @@ Example:
                "ro":false,
                "drv":"qcow2",
                "encrypted":false,
-               "file":"disks/test.img"
+               "file":"disks/test.img",
+               "bps":1000000,
+               "bps_rd":0,
+               "bps_wr":0,
+               "iops":1000000,
+               "iops_rd":0,
+               "iops_wr":0,
             },
             "type":"unknown"
          },
-- 
1.7.6




reply via email to

[Prev in Thread] Current Thread [Next in Thread]