qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Xen-devel] [PATCH V3 10/10] Introduce Xen PCI Passthro


From: Konrad Rzeszutek Wilk
Subject: Re: [Qemu-devel] [Xen-devel] [PATCH V3 10/10] Introduce Xen PCI Passthrough, MSI (3/3)
Date: Thu, 10 Nov 2011 17:10:27 -0500
User-agent: Mutt/1.5.21 (2010-09-15)

On Fri, Oct 28, 2011 at 04:07:36PM +0100, Anthony PERARD wrote:
> From: Jiang Yunhong <address@hidden>
> 
> Signed-off-by: Jiang Yunhong <address@hidden>
> Signed-off-by: Shan Haitao <address@hidden>
> Signed-off-by: Anthony PERARD <address@hidden>
> ---
>  Makefile.target                      |    1 +
>  hw/apic-msidef.h                     |    2 +
>  hw/xen_pci_passthrough.c             |   27 ++-
>  hw/xen_pci_passthrough.h             |   55 +++
>  hw/xen_pci_passthrough_config_init.c |  495 +++++++++++++++++++++++++-
>  hw/xen_pci_passthrough_msi.c         |  667 
> ++++++++++++++++++++++++++++++++++
>  6 files changed, 1240 insertions(+), 7 deletions(-)
>  create mode 100644 hw/xen_pci_passthrough_msi.c
> 
> diff --git a/Makefile.target b/Makefile.target
> index c32c688..17b8857 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -220,6 +220,7 @@ obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += 
> host-pci-device.o
>  obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough.o
>  obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough_helpers.o
>  obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough_config_init.o
> +obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough_msi.o
>  
>  # Inter-VM PCI shared memory
>  CONFIG_IVSHMEM =
> diff --git a/hw/apic-msidef.h b/hw/apic-msidef.h
> index 3182f0b..6e2eb71 100644
> --- a/hw/apic-msidef.h
> +++ b/hw/apic-msidef.h
> @@ -22,6 +22,8 @@
>  
>  #define MSI_ADDR_DEST_MODE_SHIFT        2
>  
> +#define MSI_ADDR_REDIRECTION_SHIFT      3
> +
>  #define MSI_ADDR_DEST_ID_SHIFT          12
>  #define  MSI_ADDR_DEST_ID_MASK          0x00ffff0
>  
> diff --git a/hw/xen_pci_passthrough.c b/hw/xen_pci_passthrough.c
> index b97c5b6..4b9eb74 100644
> --- a/hw/xen_pci_passthrough.c
> +++ b/hw/xen_pci_passthrough.c
> @@ -417,6 +417,7 @@ static void pt_iomem_map(XenPCIPassthroughState *s, int i,
>      }
>  
>      if (!first_map && old_ebase != -1) {
> +        pt_add_msix_mapping(s, i);
>          /* Remove old mapping */
>          ret = xc_domain_memory_mapping(xen_xc, xen_domid,
>                                 old_ebase >> XC_PAGE_SHIFT,
> @@ -441,6 +442,15 @@ static void pt_iomem_map(XenPCIPassthroughState *s, int 
> i,
>          if (ret != 0) {
>              PT_LOG("Error: create new mapping failed!\n");
>          }
> +
> +        ret = pt_remove_msix_mapping(s, i);
> +        if (ret != 0) {
> +            PT_LOG("Error: remove MSI-X mmio mapping failed!\n");
> +        }
> +
> +        if (old_ebase != e_phys && old_ebase != -1) {
> +            pt_msix_update_remap(s, i);
> +        }
>      }
>  }
>  
> @@ -737,6 +747,9 @@ static int pt_initfn(PCIDevice *pcidev)
>          mapped_machine_irq[machine_irq]++;
>      }
>  
> +    /* setup MSI-INTx translation if support */
> +    rc = pt_enable_msi_translate(s);
> +
>      /* bind machine_irq to device */
>      if (rc < 0 && machine_irq != 0) {
>          uint8_t e_device = PCI_SLOT(s->dev.devfn);
> @@ -765,7 +778,8 @@ static int pt_initfn(PCIDevice *pcidev)
>  
>  out:
>      PT_LOG("Real physical device %02x:%02x.%x registered successfuly!\n"
> -           "IRQ type = %s\n", bus, slot, func, "INTx");
> +           "IRQ type = %s\n", bus, slot, func,
> +           s->msi_trans_en ? "MSI-INTx" : "INTx");
>  
>      return 0;
>  }
> @@ -782,7 +796,7 @@ static int pt_unregister_device(PCIDevice *pcidev)
>      e_intx = pci_intx(s);
>      machine_irq = s->machine_irq;
>  
> -    if (machine_irq) {
> +    if (s->msi_trans_en == 0 && machine_irq) {
>          rc = xc_domain_unbind_pt_irq(xen_xc, xen_domid, machine_irq,
>                                       PT_IRQ_TYPE_PCI, 0, e_device, e_intx, 
> 0);
>          if (rc < 0) {
> @@ -790,6 +804,13 @@ static int pt_unregister_device(PCIDevice *pcidev)
>          }
>      }
>  
> +    if (s->msi) {
> +        pt_msi_disable(s);
> +    }
> +    if (s->msix) {
> +        pt_msix_disable(s);
> +    }
> +
>      if (machine_irq) {
>          mapped_machine_irq[machine_irq]--;
>  
> @@ -824,6 +845,8 @@ static PCIDeviceInfo xen_pci_passthrough = {
>      .is_express = 0,
>      .qdev.props = (Property[]) {
>          DEFINE_PROP_STRING("hostaddr", XenPCIPassthroughState, hostaddr),
> +        DEFINE_PROP_BIT("msitranslate", XenPCIPassthroughState, 
> msi_trans_cap,
> +                        0, true),
>          DEFINE_PROP_BIT("power-mgmt", XenPCIPassthroughState, power_mgmt,
>                          0, false),
>          DEFINE_PROP_END_OF_LIST(),
> diff --git a/hw/xen_pci_passthrough.h b/hw/xen_pci_passthrough.h
> index ebc04fd..5f404b0 100644
> --- a/hw/xen_pci_passthrough.h
> +++ b/hw/xen_pci_passthrough.h
> @@ -63,6 +63,10 @@ typedef int (*conf_byte_restore)
>  
>  #define PT_BAR_ALLF        0xFFFFFFFF  /* BAR ALLF value */
>  
> +/* MSI-X */
> +#define PT_MSI_FLAG_UNINIT 0x1000
> +#define PT_MSI_FLAG_MAPPED 0x2000
> +
>  
>  typedef enum {
>      GRP_TYPE_HARDWIRED = 0,                     /* 0 Hardwired reg group */
> @@ -166,6 +170,34 @@ typedef struct XenPTRegGroup {
>  } XenPTRegGroup;
>  
>  
> +typedef struct XenPTMSI {
> +    uint32_t flags;
> +    uint32_t ctrl_offset; /* saved control offset */
> +    int pirq;          /* guest pirq corresponding */
> +    uint32_t addr_lo;  /* guest message address */
> +    uint32_t addr_hi;  /* guest message upper address */
> +    uint16_t data;     /* guest message data */
> +} XenPTMSI;
> +
> +typedef struct XenMSIXEntry {
> +    int pirq;        /* -1 means unmapped */
> +    int flags;       /* flags indicting whether MSI ADDR or DATA is updated 
> */
> +    uint32_t io_mem[4];
> +} XenMSIXEntry;
> +typedef struct XenPTMSIX {
> +    uint32_t ctrl_offset;
> +    int enabled;
> +    int total_entries;
> +    int bar_index;
> +    uint64_t table_base;
> +    uint32_t table_off;
> +    uint32_t table_offset_adjust; /* page align mmap */
> +    uint64_t mmio_base_addr;
> +    int mmio_index;
> +    void *phys_iomem_base;
> +    XenMSIXEntry msix_entry[0];
> +} XenPTMSIX;
> +
>  typedef struct XenPTPM {
>      QEMUTimer *pm_timer;  /* QEMUTimer struct */
>      int no_soft_reset;    /* No Soft Reset flags */
> @@ -189,6 +221,13 @@ struct XenPCIPassthroughState {
>  
>      uint32_t machine_irq;
>  
> +    XenPTMSI *msi;
> +    XenPTMSIX *msix;
> +
> +    /* Physical MSI to guest INTx translation when possible */
> +    uint32_t msi_trans_cap;
> +    bool msi_trans_en;
> +
>      uint32_t power_mgmt;
>      XenPTPM *pm_state;
>  
> @@ -222,4 +261,20 @@ static inline uint8_t 
> pci_read_intx(XenPCIPassthroughState *s)
>  }
>  uint8_t pci_intx(XenPCIPassthroughState *ptdev);
>  
> +/* MSI/MSI-X */
> +void pt_msi_set_enable(XenPCIPassthroughState *s, int en);
> +int pt_msi_setup(XenPCIPassthroughState *s);
> +int pt_msi_update(XenPCIPassthroughState *d);
> +void pt_msi_disable(XenPCIPassthroughState *s);
> +int pt_enable_msi_translate(XenPCIPassthroughState *s);
> +void pt_disable_msi_translate(XenPCIPassthroughState *s);
> +
> +int pt_msix_init(XenPCIPassthroughState *s, int pos);
> +void pt_msix_delete(XenPCIPassthroughState *s);
> +int pt_msix_update(XenPCIPassthroughState *s);
> +int pt_msix_update_remap(XenPCIPassthroughState *s, int bar_index);
> +void pt_msix_disable(XenPCIPassthroughState *s);
> +int pt_add_msix_mapping(XenPCIPassthroughState *s, int bar_index);
> +int pt_remove_msix_mapping(XenPCIPassthroughState *s, int bar_index);
> +
>  #endif /* !QEMU_HW_XEN_PCI_PASSTHROUGH_H */
> diff --git a/hw/xen_pci_passthrough_config_init.c 
> b/hw/xen_pci_passthrough_config_init.c
> index 4103b59..b4238ee 100644
> --- a/hw/xen_pci_passthrough_config_init.c
> +++ b/hw/xen_pci_passthrough_config_init.c
> @@ -375,11 +375,19 @@ static int pt_cmd_reg_write(XenPCIPassthroughState *s, 
> XenPTReg *cfg_entry,
>      throughable_mask = ~emu_mask & valid_mask;
>  
>      if (*value & PCI_COMMAND_INTX_DISABLE) {
> -        throughable_mask |= PCI_COMMAND_INTX_DISABLE;
> -    } else {
> -        if (s->machine_irq) {
> +        if (s->msi_trans_en) {
> +            pt_msi_set_enable(s, 0);
> +        } else {
>              throughable_mask |= PCI_COMMAND_INTX_DISABLE;
>          }
> +    } else {
> +        if (s->msi_trans_en) {
> +            pt_msi_set_enable(s, 1);
> +        } else {
> +            if (s->machine_irq) {
> +                throughable_mask |= PCI_COMMAND_INTX_DISABLE;
> +            }
> +        }
>      }
>  
>      *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> @@ -1248,13 +1256,21 @@ static void 
> pt_reset_interrupt_and_io_mapping(XenPCIPassthroughState *s)
>      e_device = PCI_SLOT(s->dev.devfn);
>      e_intx = pci_intx(s);
>  
> -    if (s->machine_irq) {
> +    if (s->msi_trans_en == 0 && s->machine_irq) {
>          if (xc_domain_unbind_pt_irq(xen_xc, xen_domid, s->machine_irq,
>                                      PT_IRQ_TYPE_PCI, 0, e_device, e_intx, 
> 0)) {
>              PT_LOG("Error: Unbinding of interrupt failed!\n");
>          }
>      }
>  
> +    /* disable MSI/MSI-X and MSI-INTx translation */
> +    if (s->msi) {
> +        pt_msi_disable(s);
> +    }
> +    if (s->msix) {
> +        pt_msix_disable(s);
> +    }
> +
>      /* clear all virtual region address */
>      for (i = 0; i < PCI_NUM_REGIONS; i++) {
>          r = &d->io_regions[i];
> @@ -1501,6 +1517,406 @@ static XenPTRegInfo pt_emu_reg_pm_tbl[] = {
>      },
>  };
>  
> +/********************************
> + * MSI Capability
> + */
> +
> +/* Message Control register */
> +static uint32_t pt_msgctrl_reg_init(XenPCIPassthroughState *s,
> +                                    XenPTRegInfo *reg, uint32_t real_offset)
> +{
> +    PCIDevice *d = &s->dev;
> +    uint16_t reg_field = 0;
> +
> +    /* use I/O device register's value as initial value */
> +    reg_field = pci_get_word(d->config + real_offset);
> +
> +    if (reg_field & PCI_MSI_FLAGS_ENABLE) {
> +        PT_LOG("MSI enabled already, disable first\n");
> +        host_pci_set_word(s->real_device, real_offset,
> +                          reg_field & ~PCI_MSI_FLAGS_ENABLE);
> +    }
> +    s->msi->flags |= reg_field | PT_MSI_FLAG_UNINIT;
> +    s->msi->ctrl_offset = real_offset;
> +
> +    return reg->init_val;
> +}
> +static int pt_msgctrl_reg_write(XenPCIPassthroughState *s, XenPTReg 
> *cfg_entry,
> +                                uint16_t *value, uint16_t dev_value,
> +                                uint16_t valid_mask)
> +{
> +    XenPTRegInfo *reg = cfg_entry->reg;
> +    uint16_t writable_mask = 0;
> +    uint16_t throughable_mask = 0;
> +    PCIDevice *pd = (PCIDevice *)s;
> +    uint16_t val;
> +
> +    /* Currently no support for multi-vector */
> +    if (*value & PCI_MSI_FLAGS_QSIZE) {
> +        PT_LOG("Warning: try to set more than 1 vector ctrl %x\n", *value);
> +    }
> +
> +    /* modify emulate register */
> +    writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
> +    cfg_entry->data = PT_MERGE_VALUE(*value, cfg_entry->data, writable_mask);
> +    /* update the msi_info too */
> +    s->msi->flags |= cfg_entry->data &
> +        ~(PT_MSI_FLAG_UNINIT | PT_MSI_FLAG_MAPPED | PCI_MSI_FLAGS_ENABLE);
> +
> +    /* create value for writing to I/O device register */
> +    val = *value;
> +    throughable_mask = ~reg->emu_mask & valid_mask;
> +    *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> +
> +    /* update MSI */
> +    if (val & PCI_MSI_FLAGS_ENABLE) {
> +        /* setup MSI pirq for the first time */
> +        if (s->msi->flags & PT_MSI_FLAG_UNINIT) {
> +            if (s->msi_trans_en) {
> +                PT_LOG("guest enabling MSI, disable MSI-INTx translation\n");
> +                pt_disable_msi_translate(s);
> +            } else {
> +                /* Init physical one */
> +                PT_LOG("setup msi for dev %x\n", pd->devfn);
> +                if (pt_msi_setup(s)) {
> +                    /* We do not broadcast the error to the framework code, 
> so
> +                     * that MSI errors are contained in MSI emulation code 
> and
> +                     * QEMU can go on running.
> +                     * Guest MSI would be actually not working.
> +                     */
> +                    *value &= ~PCI_MSI_FLAGS_ENABLE;
> +                    PT_LOG("Warning: Can not map MSI for dev %x\n", 
> pd->devfn);
> +                    return 0;
> +                }
> +            }
> +            if (pt_msi_update(s)) {
> +                *value &= ~PCI_MSI_FLAGS_ENABLE;
> +                PT_LOG("Warning: Can not bind MSI for dev %x\n", pd->devfn);
> +                return 0;
> +            }
> +            s->msi->flags &= ~PT_MSI_FLAG_UNINIT;
> +            s->msi->flags |= PT_MSI_FLAG_MAPPED;
> +        }
> +        s->msi->flags |= PCI_MSI_FLAGS_ENABLE;
> +    } else {
> +        s->msi->flags &= ~PCI_MSI_FLAGS_ENABLE;
> +    }
> +
> +    /* pass through MSI_ENABLE bit when no MSI-INTx translation */
> +    if (!s->msi_trans_en) {
> +        *value &= ~PCI_MSI_FLAGS_ENABLE;
> +        *value |= val & PCI_MSI_FLAGS_ENABLE;
> +    }
> +
> +    return 0;
> +}
> +
> +/* initialize Message Upper Address register */
> +static uint32_t pt_msgaddr64_reg_init(XenPCIPassthroughState *ptdev,
> +                                      XenPTRegInfo *reg, uint32_t 
> real_offset)
> +{
> +    /* no need to initialize in case of 32 bit type */
> +    if (!(ptdev->msi->flags & PCI_MSI_FLAGS_64BIT)) {
> +        return PT_INVALID_REG;
> +    }
> +
> +    return reg->init_val;
> +}
> +/* this function will be called twice (for 32 bit and 64 bit type) */
> +/* initialize Message Data register */
> +static uint32_t pt_msgdata_reg_init(XenPCIPassthroughState *ptdev,
> +                                    XenPTRegInfo *reg, uint32_t real_offset)
> +{
> +    uint32_t flags = ptdev->msi->flags;
> +    uint32_t offset = reg->offset;
> +
> +    /* check the offset whether matches the type or not */
> +    if (((offset == PCI_MSI_DATA_64) &&  (flags & PCI_MSI_FLAGS_64BIT)) ||
> +        ((offset == PCI_MSI_DATA_32) && !(flags & PCI_MSI_FLAGS_64BIT))) {
> +        return reg->init_val;
> +    } else {
> +        return PT_INVALID_REG;
> +    }
> +}
> +
> +/* write Message Address register */
> +static int pt_msgaddr32_reg_write(XenPCIPassthroughState *s,
> +                                  XenPTReg *cfg_entry, uint32_t *value,
> +                                  uint32_t dev_value, uint32_t valid_mask)
> +{
> +    XenPTRegInfo *reg = cfg_entry->reg;
> +    uint32_t writable_mask = 0;
> +    uint32_t throughable_mask = 0;
> +    uint32_t old_addr = cfg_entry->data;
> +
> +    /* modify emulate register */
> +    writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
> +    cfg_entry->data = PT_MERGE_VALUE(*value, cfg_entry->data, writable_mask);
> +    /* update the msi_info too */
> +    s->msi->addr_lo = cfg_entry->data;
> +
> +    /* create value for writing to I/O device register */
> +    throughable_mask = ~reg->emu_mask & valid_mask;
> +    *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> +
> +    /* update MSI */
> +    if (cfg_entry->data != old_addr) {
> +        if (s->msi->flags & PT_MSI_FLAG_MAPPED) {
> +            pt_msi_update(s);
> +        }
> +    }
> +
> +    return 0;
> +}
> +/* write Message Upper Address register */
> +static int pt_msgaddr64_reg_write(XenPCIPassthroughState *s,
> +                                  XenPTReg *cfg_entry, uint32_t *value,
> +                                  uint32_t dev_value, uint32_t valid_mask)
> +{
> +    XenPTRegInfo *reg = cfg_entry->reg;
> +    uint32_t writable_mask = 0;
> +    uint32_t throughable_mask = 0;
> +    uint32_t old_addr = cfg_entry->data;
> +
> +    /* check whether the type is 64 bit or not */
> +    if (!(s->msi->flags & PCI_MSI_FLAGS_64BIT)) {
> +        /* exit I/O emulator */
> +        PT_LOG("Error: why comes to Upper Address without 64 bit 
> support??\n");

Um, not sure what that means.

> +        return -1;
> +    }
> +
> +    /* modify emulate register */
> +    writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
> +    cfg_entry->data = PT_MERGE_VALUE(*value, cfg_entry->data, writable_mask);
> +    /* update the msi_info too */
> +    s->msi->addr_hi = cfg_entry->data;
> +
> +    /* create value for writing to I/O device register */
> +    throughable_mask = ~reg->emu_mask & valid_mask;
> +    *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> +
> +    /* update MSI */
> +    if (cfg_entry->data != old_addr) {
> +        if (s->msi->flags & PT_MSI_FLAG_MAPPED) {
> +            pt_msi_update(s);
> +        }
> +    }
> +
> +    return 0;
> +}
> +
> +
> +/* this function will be called twice (for 32 bit and 64 bit type) */
> +/* write Message Data register */
> +static int pt_msgdata_reg_write(XenPCIPassthroughState *s, XenPTReg 
> *cfg_entry,
> +                                uint16_t *value, uint16_t dev_value,
> +                                uint16_t valid_mask)
> +{
> +    XenPTRegInfo *reg = cfg_entry->reg;
> +    uint16_t writable_mask = 0;
> +    uint16_t throughable_mask = 0;
> +    uint16_t old_data = cfg_entry->data;
> +    uint32_t flags = s->msi->flags;
> +    uint32_t offset = reg->offset;
> +
> +    /* check the offset whether matches the type or not */
> +    if (!((offset == PCI_MSI_DATA_64) &&  (flags & PCI_MSI_FLAGS_64BIT)) &&
> +        !((offset == PCI_MSI_DATA_32) && !(flags & PCI_MSI_FLAGS_64BIT))) {
> +        /* exit I/O emulator */
> +        PT_LOG("Error: the offset is not match with the 32/64 bit type!!\n");

I think it means: "The offset does not match the 32/64 bit type"

> +        return -1;
> +    }
> +
> +    /* modify emulate register */
> +    writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
> +    cfg_entry->data = PT_MERGE_VALUE(*value, cfg_entry->data, writable_mask);
> +    /* update the msi_info too */
> +    s->msi->data = cfg_entry->data;
> +
> +    /* create value for writing to I/O device register */
> +    throughable_mask = ~reg->emu_mask & valid_mask;
> +    *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> +
> +    /* update MSI */
> +    if (cfg_entry->data != old_data) {
> +        if (flags & PT_MSI_FLAG_MAPPED) {
> +            pt_msi_update(s);
> +        }
> +    }
> +
> +    return 0;
> +}
> +
> +/* MSI Capability Structure reg static infomation table */
> +static XenPTRegInfo pt_emu_reg_msi_tbl[] = {
> +    /* Next Pointer reg */
> +    {
> +        .offset     = PCI_CAP_LIST_NEXT,
> +        .size       = 1,
> +        .init_val   = 0x00,
> +        .ro_mask    = 0xFF,
> +        .emu_mask   = 0xFF,
> +        .init       = pt_ptr_reg_init,
> +        .u.b.read   = pt_byte_reg_read,
> +        .u.b.write  = pt_byte_reg_write,
> +        .u.b.restore  = NULL,
> +    },
> +    /* Message Control reg */
> +    {
> +        .offset     = PCI_MSI_FLAGS,
> +        .size       = 2,
> +        .init_val   = 0x0000,
> +        .ro_mask    = 0xFF8E,
> +        .emu_mask   = 0x007F,
> +        .init       = pt_msgctrl_reg_init,
> +        .u.w.read   = pt_word_reg_read,
> +        .u.w.write  = pt_msgctrl_reg_write,
> +        .u.w.restore  = NULL,
> +    },
> +    /* Message Address reg */
> +    {
> +        .offset     = PCI_MSI_ADDRESS_LO,
> +        .size       = 4,
> +        .init_val   = 0x00000000,
> +        .ro_mask    = 0x00000003,
> +        .emu_mask   = 0xFFFFFFFF,
> +        .no_wb      = 1,
> +        .init       = pt_common_reg_init,
> +        .u.dw.read  = pt_long_reg_read,
> +        .u.dw.write = pt_msgaddr32_reg_write,
> +        .u.dw.restore = NULL,
> +    },
> +    /* Message Upper Address reg (if PCI_MSI_FLAGS_64BIT set) */
> +    {
> +        .offset     = PCI_MSI_ADDRESS_HI,
> +        .size       = 4,
> +        .init_val   = 0x00000000,
> +        .ro_mask    = 0x00000000,
> +        .emu_mask   = 0xFFFFFFFF,
> +        .no_wb      = 1,
> +        .init       = pt_msgaddr64_reg_init,
> +        .u.dw.read  = pt_long_reg_read,
> +        .u.dw.write = pt_msgaddr64_reg_write,
> +        .u.dw.restore = NULL,
> +    },
> +    /* Message Data reg (16 bits of data for 32-bit devices) */
> +    {
> +        .offset     = PCI_MSI_DATA_32,
> +        .size       = 2,
> +        .init_val   = 0x0000,
> +        .ro_mask    = 0x0000,
> +        .emu_mask   = 0xFFFF,
> +        .no_wb      = 1,
> +        .init       = pt_msgdata_reg_init,
> +        .u.w.read   = pt_word_reg_read,
> +        .u.w.write  = pt_msgdata_reg_write,
> +        .u.w.restore  = NULL,
> +    },
> +    /* Message Data reg (16 bits of data for 64-bit devices) */
> +    {
> +        .offset     = PCI_MSI_DATA_64,
> +        .size       = 2,
> +        .init_val   = 0x0000,
> +        .ro_mask    = 0x0000,
> +        .emu_mask   = 0xFFFF,
> +        .no_wb      = 1,
> +        .init       = pt_msgdata_reg_init,
> +        .u.w.read   = pt_word_reg_read,
> +        .u.w.write  = pt_msgdata_reg_write,
> +        .u.w.restore  = NULL,
> +    },
> +    {
> +        .size = 0,
> +    },
> +};
> +
> +
> +/**************************************
> + * MSI-X Capability
> + */
> +
> +/* Message Control register for MSI-X */
> +static uint32_t pt_msixctrl_reg_init(XenPCIPassthroughState *s,
> +                                     XenPTRegInfo *reg, uint32_t real_offset)
> +{
> +    PCIDevice *d = &s->dev;
> +    uint16_t reg_field = 0;
> +
> +    /* use I/O device register's value as initial value */
> +    reg_field = pci_get_word(d->config + real_offset);
> +
> +    if (reg_field & PCI_MSIX_FLAGS_ENABLE) {
> +        PT_LOG("MSIX enabled already, disable first\n");
> +        host_pci_set_word(s->real_device, real_offset,
> +                          reg_field & ~PCI_MSIX_FLAGS_ENABLE);
> +    }
> +
> +    s->msix->ctrl_offset = real_offset;
> +
> +    return reg->init_val;
> +}
> +static int pt_msixctrl_reg_write(XenPCIPassthroughState *s,
> +                                 XenPTReg *cfg_entry, uint16_t *value,
> +                                 uint16_t dev_value, uint16_t valid_mask)
> +{
> +    XenPTRegInfo *reg = cfg_entry->reg;
> +    uint16_t writable_mask = 0;
> +    uint16_t throughable_mask = 0;
> +
> +    /* modify emulate register */
> +    writable_mask = reg->emu_mask & ~reg->ro_mask & valid_mask;
> +    cfg_entry->data = PT_MERGE_VALUE(*value, cfg_entry->data, writable_mask);
> +
> +    /* create value for writing to I/O device register */
> +    throughable_mask = ~reg->emu_mask & valid_mask;
> +    *value = PT_MERGE_VALUE(*value, dev_value, throughable_mask);
> +
> +    /* update MSI-X */
> +    if ((*value & PCI_MSIX_FLAGS_ENABLE)
> +        && !(*value & PCI_MSIX_FLAGS_MASKALL)) {
> +        if (s->msi_trans_en) {
> +            PT_LOG("guest enabling MSI-X, disable MSI-INTx translation\n");
> +            pt_disable_msi_translate(s);
> +        }
> +        pt_msix_update(s);
> +    }
> +
> +    s->msix->enabled = !!(*value & PCI_MSIX_FLAGS_ENABLE);
> +
> +    return 0;
> +}
> +
> +/* MSI-X Capability Structure reg static infomation table */
> +static XenPTRegInfo pt_emu_reg_msix_tbl[] = {
> +    /* Next Pointer reg */
> +    {
> +        .offset     = PCI_CAP_LIST_NEXT,
> +        .size       = 1,
> +        .init_val   = 0x00,
> +        .ro_mask    = 0xFF,
> +        .emu_mask   = 0xFF,
> +        .init       = pt_ptr_reg_init,
> +        .u.b.read   = pt_byte_reg_read,
> +        .u.b.write  = pt_byte_reg_write,
> +        .u.b.restore  = NULL,
> +    },
> +    /* Message Control reg */
> +    {
> +        .offset     = PCI_MSI_FLAGS,
> +        .size       = 2,
> +        .init_val   = 0x0000,
> +        .ro_mask    = 0x3FFF,
> +        .emu_mask   = 0x0000,
> +        .init       = pt_msixctrl_reg_init,
> +        .u.w.read   = pt_word_reg_read,
> +        .u.w.write  = pt_msixctrl_reg_write,
> +        .u.w.restore  = NULL,
> +    },
> +    {
> +        .size = 0,
> +    },
> +};
> +
>  
>  /****************************
>   * Capabilities
> @@ -1664,6 +2080,48 @@ static uint8_t 
> pt_pcie_size_init(XenPCIPassthroughState *s,
>  
>      return pcie_size;
>  }
> +/* get MSI Capability Structure register group size */
> +static uint8_t pt_msi_size_init(XenPCIPassthroughState *s,
> +                                const XenPTRegGroupInfo *grp_reg,
> +                                uint32_t base_offset)
> +{
> +    PCIDevice *d = &s->dev;
> +    uint16_t msg_ctrl = 0;
> +    uint8_t msi_size = 0xa;
> +
> +    msg_ctrl = pci_get_word(d->config + (base_offset + PCI_MSI_FLAGS));
> +
> +    /* check 64 bit address capable & Per-vector masking capable */

ehh?


> +    if (msg_ctrl & PCI_MSI_FLAGS_64BIT) {
> +        msi_size += 4;
> +    }
> +    if (msg_ctrl & PCI_MSI_FLAGS_MASKBIT) {
> +        msi_size += 10;
> +    }
> +
> +    s->msi = g_malloc0(sizeof (XenPTMSI));
> +    s->msi->pirq = -1;

Is there a define for this -1?

> +    PT_LOG("done\n");
> +
> +    return msi_size;
> +}
> +/* get MSI-X Capability Structure register group size */
> +static uint8_t pt_msix_size_init(XenPCIPassthroughState *s,
> +                                 const XenPTRegGroupInfo *grp_reg,
> +                                 uint32_t base_offset)
> +{
> +    int ret = 0;
> +
> +    ret = pt_msix_init(s, base_offset);
> +
> +    if (ret == -1) {
> +        hw_error("Internal error: Invalid pt_msix_init return value[%d]. "
> +                 "I/O emulator exit.\n", ret);
> +    }
> +
> +    return grp_reg->grp_size;
> +}
> +
>  
>  static const XenPTRegGroupInfo pt_emu_reg_grp_tbl[] = {
>      /* Header Type0 reg group */
> @@ -1704,6 +2162,14 @@ static const XenPTRegGroupInfo pt_emu_reg_grp_tbl[] = {
>          .grp_size   = 0x04,
>          .size_init  = pt_reg_grp_size_init,
>      },
> +    /* MSI Capability Structure reg group */
> +    {
> +        .grp_id      = PCI_CAP_ID_MSI,
> +        .grp_type    = GRP_TYPE_EMU,
> +        .grp_size    = 0xFF,
> +        .size_init   = pt_msi_size_init,
> +        .emu_reg_tbl = pt_emu_reg_msi_tbl,
> +    },
>      /* PCI-X Capabilities List Item reg group */
>      {
>          .grp_id     = PCI_CAP_ID_PCIX,
> @@ -1748,6 +2214,14 @@ static const XenPTRegGroupInfo pt_emu_reg_grp_tbl[] = {
>          .size_init   = pt_pcie_size_init,
>          .emu_reg_tbl = pt_emu_reg_pcie_tbl,
>      },
> +    /* MSI-X Capability Structure reg group */
> +    {
> +        .grp_id      = PCI_CAP_ID_MSIX,
> +        .grp_type    = GRP_TYPE_EMU,
> +        .grp_size    = 0x0C,
> +        .size_init   = pt_msix_size_init,
> +        .emu_reg_tbl = pt_emu_reg_msix_tbl,
> +    },
>      {
>          .grp_size = 0,
>      },
> @@ -1908,8 +2382,11 @@ static int pt_init_pci_config(XenPCIPassthroughState 
> *s)
>      /* reinitialize all emulate register */
>      pt_config_reinit(s);
>  
> +    /* setup MSI-INTx translation if support */
> +    ret = pt_enable_msi_translate(s);
> +
>      /* rebind machine_irq to device */
> -    if (s->machine_irq != 0) {
> +    if (ret < 0 && s->machine_irq != 0) {

So can machine_irq be -1? Or is it only pirq that can be -1?


>          uint8_t e_device = PCI_SLOT(s->dev.devfn);
>          uint8_t e_intx = pci_intx(s);
>  
> @@ -2043,6 +2520,14 @@ void pt_config_delete(XenPCIPassthroughState *s)
>      struct XenPTRegGroup *reg_group, *next_grp;
>      struct XenPTReg *reg, *next_reg;
>  
> +    /* free MSI/MSI-X info table */
> +    if (s->msix) {
> +        pt_msix_delete(s);
> +    }
> +    if (s->msi) {
> +        g_free(s->msi);
> +    }
> +
>      /* free Power Management info table */
>      if (s->pm_state) {
>          if (s->pm_state->pm_timer) {
> diff --git a/hw/xen_pci_passthrough_msi.c b/hw/xen_pci_passthrough_msi.c
> new file mode 100644
> index 0000000..533aef4
> --- /dev/null
> +++ b/hw/xen_pci_passthrough_msi.c
> @@ -0,0 +1,667 @@
> +/*
> + * Copyright (c) 2007, Intel Corporation.
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.  See
> + * the COPYING file in the top-level directory.
> + *
> + * Jiang Yunhong <address@hidden>
> + *
> + * This file implements direct PCI assignment to a HVM guest
> + */
> +
> +#include <sys/mman.h>
> +
> +#include "xen_backend.h"
> +#include "xen_pci_passthrough.h"
> +#include "apic-msidef.h"
> +
> +
> +#define AUTO_ASSIGN -1
> +
> +/* shift count for gflags */
> +#define GFLAGS_SHIFT_DEST_ID        0
> +#define GFLAGS_SHIFT_RH             8
> +#define GFLAGS_SHIFT_DM             9
> +#define GLFAGS_SHIFT_DELIV_MODE     12
> +#define GLFAGS_SHIFT_TRG_MODE       15
> +
> +
> +void pt_msi_set_enable(XenPCIPassthroughState *s, int en)
> +{
> +    uint16_t val = 0;
> +    uint32_t address = 0;
> +    PT_LOG("enable: %i\n", en);
> +
> +    if (!s->msi) {
> +        return;
> +    }
> +
> +    address = s->msi->ctrl_offset;
> +    if (!address) {
> +        return;
> +    }
> +
> +    val = host_pci_get_word(s->real_device, address);
> +    val &= ~PCI_MSI_FLAGS_ENABLE;
> +    val |= en & PCI_MSI_FLAGS_ENABLE;
> +    host_pci_set_word(s->real_device, address, val);
> +
> +    PT_LOG("done, address: %#x, val: %#x\n", address, val);
> +}
> +
> +static void msix_set_enable(XenPCIPassthroughState *s, int en)
> +{
> +    uint16_t val = 0;
> +    uint32_t address = 0;
> +
> +    if (!s->msix) {
> +        return;
> +    }
> +
> +    address = s->msix->ctrl_offset;
> +    if (!address) {
> +        return;
> +    }
> +
> +    val = host_pci_get_word(s->real_device, address);
> +    val &= ~PCI_MSIX_FLAGS_ENABLE;
> +    if (en) {
> +        val |= PCI_MSIX_FLAGS_ENABLE;
> +    }
> +    host_pci_set_word(s->real_device, address, val);
> +}
> +
> +/*********************************/
> +/* MSI virtuailization functions */


virtualization
> +
> +/*
> + * setup physical msi, but didn't enable it

but don't

> + */
> +int pt_msi_setup(XenPCIPassthroughState *s)
> +{
> +    int pirq = -1;
> +    uint8_t gvec = 0;
> +
> +    if (!(s->msi->flags & PT_MSI_FLAG_UNINIT)) {
> +        PT_LOG("Error: setup physical after initialized??\n");

I am not sure what that says.

> +        return -1;
> +    }
> +
> +    gvec = s->msi->data & 0xFF;
> +    if (!gvec) {
> +        /* if gvec is 0, the guest is asking for a particular pirq that
> +         * is passed as dest_id */
> +        pirq = (s->msi->addr_hi & 0xffffff00) |
> +               ((s->msi->addr_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
> +        if (!pirq) {
> +            /* this probably identifies an misconfiguration of the guest,
> +             * try the emulated path */
> +            pirq = -1;
> +        } else {
> +            PT_LOG("pt_msi_setup requested pirq = %d\n", pirq);
> +        }
> +    }
> +
> +    if (xc_physdev_map_pirq_msi(xen_xc, xen_domid, AUTO_ASSIGN, &pirq,
> +                                PCI_DEVFN(s->real_device->dev,
> +                                          s->real_device->func),
> +                                s->real_device->bus, 0, 0)) {
> +        PT_LOG("Error: Mapping of MSI failed.\n");

Give more details. As in what device failed. PErhaps even the return code?

> +        return -1;
> +    }
> +
> +    if (pirq < 0) {
> +        PT_LOG("Error: Invalid pirq number\n");
> +        return -1;
> +    }
> +
> +    s->msi->pirq = pirq;
> +    PT_LOG("msi mapped with pirq %x\n", pirq);
> +
> +    return 0;
> +}
> +
> +static uint32_t __get_msi_gflags(uint32_t data, uint64_t addr)
> +{
> +    uint32_t result = 0;
> +    int rh, dm, dest_id, deliv_mode, trig_mode;
> +
> +    rh = (addr >> MSI_ADDR_REDIRECTION_SHIFT) & 0x1;
> +    dm = (addr >> MSI_ADDR_DEST_MODE_SHIFT) & 0x1;
> +    dest_id = (addr >> MSI_ADDR_DEST_ID_SHIFT) & 0xff;
> +    deliv_mode = (data >> MSI_DATA_DELIVERY_MODE_SHIFT) & 0x7;
> +    trig_mode = (data >> MSI_DATA_TRIGGER_SHIFT) & 0x1;
> +
> +    result = dest_id | (rh << GFLAGS_SHIFT_RH) | (dm << GFLAGS_SHIFT_DM) |
> +             (deliv_mode << GLFAGS_SHIFT_DELIV_MODE) |
> +             (trig_mode << GLFAGS_SHIFT_TRG_MODE);
> +
> +    return result;
> +}
> +
> +int pt_msi_update(XenPCIPassthroughState *s)
> +{
> +    uint8_t gvec = 0;
> +    uint32_t gflags = 0;
> +    uint64_t addr = 0;
> +    int ret = 0;
> +
> +    /* get vector, address, flags info, etc. */
> +    gvec = s->msi->data & 0xFF;
> +    addr = (uint64_t)s->msi->addr_hi << 32 | s->msi->addr_lo;
> +    gflags = __get_msi_gflags(s->msi->data, addr);
> +
> +    PT_LOG("Update msi with pirq %x gvec %x gflags %x\n",
> +           s->msi->pirq, gvec, gflags);

And the details for the device?

> +
> +    ret = xc_domain_update_msi_irq(xen_xc, xen_domid, gvec,
> +                                   s->msi->pirq, gflags, 0);
> +
> +    if (ret) {
> +        PT_LOG("Error: Binding of MSI failed.\n");
> +
> +        if (xc_physdev_unmap_pirq(xen_xc, xen_domid, s->msi->pirq)) {
> +            PT_LOG("Error: Unmapping of MSI failed.\n");
> +        }
> +        s->msi->pirq = -1;
> +        return ret;
> +    }
> +    return 0;
> +}
> +
> +void pt_msi_disable(XenPCIPassthroughState *s)
> +{
> +    PCIDevice *d = &s->dev;
> +    uint8_t gvec = 0;
> +    uint32_t gflags = 0;
> +    uint64_t addr = 0;
> +    uint8_t e_device = 0;
> +    uint8_t e_intx = 0;
> +
> +    pt_msi_set_enable(s, 0);
> +
> +    e_device = PCI_SLOT(d->devfn);
> +    e_intx = pci_intx(s);
> +
> +    if (s->msi_trans_en) {
> +        if (xc_domain_unbind_pt_irq(xen_xc, xen_domid, s->msi->pirq,
> +                                    PT_IRQ_TYPE_MSI_TRANSLATE, 0,
> +                                    e_device, e_intx, 0)) {
> +            PT_LOG("Error: Unbinding pt irq for MSI-INTx failed!\n");
> +            goto out;
> +        }
> +    } else if (!(s->msi->flags & PT_MSI_FLAG_UNINIT)) {
> +        /* get vector, address, flags info, etc. */
> +        gvec = s->msi->data & 0xFF;
> +        addr = (uint64_t)s->msi->addr_hi << 32 | s->msi->addr_lo;
> +        gflags = __get_msi_gflags(s->msi->data, addr);
> +
> +        PT_LOG("Unbind msi with pirq %x, gvec %x\n",
> +                s->msi->pirq, gvec);
> +
> +        if (xc_domain_unbind_msi_irq(xen_xc, xen_domid, gvec,
> +                                        s->msi->pirq, gflags)) {
> +            PT_LOG("Error: Unbinding of MSI failed. [%02x:%02x.%x]\n",
> +                   pci_bus_num(d->bus), PCI_SLOT(d->devfn),
> +                   PCI_FUNC(d->devfn));
> +            goto out;
> +        }
> +    }
> +
> +    if (s->msi->pirq != -1) {
> +        PT_LOG("Unmap msi with pirq %x\n", s->msi->pirq);
> +
> +        if (xc_physdev_unmap_pirq(xen_xc, xen_domid, s->msi->pirq)) {
> +            PT_LOG("Error: Unmapping of MSI failed. [%02x:%02x.%x]\n",
> +                   pci_bus_num(d->bus), PCI_SLOT(d->devfn),
> +                   PCI_FUNC(d->devfn));
> +            goto out;
> +        }
> +    }
> +
> +out:
> +    /* clear msi info */
> +    s->msi->flags = 0;
> +    s->msi->pirq = -1;
> +    s->msi_trans_en = 0;
> +}
> +
> +/* MSI-INTx translation virtulization functions */

virtualization

> +int pt_enable_msi_translate(XenPCIPassthroughState *s)
> +{
> +    uint8_t e_device = 0;
> +    uint8_t e_intx = 0;
> +
> +    if (!(s->msi && s->msi_trans_cap)) {
> +        return -1;
> +    }
> +
> +    pt_msi_set_enable(s, 0);
> +    s->msi_trans_en = 0;
> +
> +    if (pt_msi_setup(s)) {
> +        PT_LOG("Error: MSI-INTx translation MSI setup failed, fallback\n");
> +        return -1;
> +    }
> +
> +    e_device = PCI_SLOT(s->dev.devfn);
> +    /* fix virtual interrupt pin to INTA# */
> +    e_intx = pci_intx(s);
> +
> +    if (xc_domain_bind_pt_irq(xen_xc, xen_domid, s->msi->pirq,
> +                              PT_IRQ_TYPE_MSI_TRANSLATE, 0,
> +                              e_device, e_intx, 0)) {
> +        PT_LOG("Error: MSI-INTx translation bind failed, fallback\n");
> +
> +        if (xc_physdev_unmap_pirq(xen_xc, xen_domid, s->msi->pirq)) {
> +            PT_LOG("Error: Unmapping of MSI failed.\n");
> +        }
> +        s->msi->pirq = -1;
> +        return -1;
> +    }
> +
> +    pt_msi_set_enable(s, 1);
> +    s->msi_trans_en = 1;
> +
> +    return 0;
> +}
> +
> +void pt_disable_msi_translate(XenPCIPassthroughState *s)
> +{
> +    uint8_t e_device = 0;
> +    uint8_t e_intx = 0;
> +
> +    /* MSI_ENABLE bit should be disabed until the new handler is set */
> +    pt_msi_set_enable(s, 0);
> +
> +    e_device = PCI_SLOT(s->dev.devfn);
> +    e_intx = pci_intx(s);
> +
> +    if (xc_domain_unbind_pt_irq(xen_xc, xen_domid, s->msi->pirq,
> +                                 PT_IRQ_TYPE_MSI_TRANSLATE, 0,
> +                                 e_device, e_intx, 0)) {
> +        PT_LOG("Error: Unbinding pt irq for MSI-INTx failed!\n");
> +    }
> +
> +    if (s->machine_irq) {
> +        if (xc_domain_bind_pt_pci_irq(xen_xc, xen_domid, s->machine_irq,
> +                                       0, e_device, e_intx)) {
> +            PT_LOG("Error: Rebinding of interrupt failed!\n");
> +        }
> +    }
> +
> +    s->msi_trans_en = 0;
> +}
> +
> +/*********************************/
> +/* MSI-X virtulization functions */


virtu...

> +
> +static void mask_physical_msix_entry(XenPCIPassthroughState *s,
> +                                     int entry_nr, int mask)
> +{
> +    void *phys_off;
> +
> +    phys_off = s->msix->phys_iomem_base + 16 * entry_nr + 12;
> +    *(uint32_t *)phys_off = mask;
> +}
> +
> +static int pt_msix_update_one(XenPCIPassthroughState *s, int entry_nr)
> +{
> +    XenMSIXEntry *entry = &s->msix->msix_entry[entry_nr];
> +    int pirq = entry->pirq;
> +    int gvec = entry->io_mem[2] & 0xff;
> +    uint64_t gaddr = *(uint64_t *)&entry->io_mem[0];
> +    uint32_t gflags = __get_msi_gflags(entry->io_mem[2], gaddr);
> +    int ret;
> +
> +    if (!entry->flags) {
> +        return 0;
> +    }
> +
> +    if (!gvec) {
> +        /* if gvec is 0, the guest is asking for a particular pirq that
> +         * is passed as dest_id */
> +        pirq = ((gaddr >> 32) & 0xffffff00) |
> +               (((gaddr & 0xffffffff) >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
> +        if (!pirq) {
> +            /* this probably identifies an misconfiguration of the guest,
> +             * try the emulated path */
> +            pirq = -1;
> +        } else {
> +            PT_LOG("pt_msix_update_one requested pirq = %d\n", pirq);

This is the same code as in the MSI case. Could it be coalesced ?

> +        }
> +    }
> +
> +    /* Check if this entry is already mapped */
> +    if (entry->pirq == -1) {
> +        ret = xc_physdev_map_pirq_msi(xen_xc, xen_domid, AUTO_ASSIGN, &pirq,
> +                                      PCI_DEVFN(s->real_device->dev,
> +                                                s->real_device->func),
> +                                      s->real_device->bus, entry_nr,
> +                                      s->msix->table_base);
> +        if (ret) {
> +            PT_LOG("Error: Mapping msix entry %x\n", entry_nr);

Oh boy. So here the error is %x, but later on it is %d. Should it
be %d or 0x%x?


> +            return ret;
> +        }
> +        entry->pirq = pirq;
> +    }
> +
> +    PT_LOG("Update msix entry %x with pirq %x gvec %x\n",
> +            entry_nr, pirq, gvec);
> +
> +    ret = xc_domain_update_msi_irq(xen_xc, xen_domid, gvec, pirq, gflags,
> +                                   s->msix->mmio_base_addr);
> +    if (ret) {
> +        PT_LOG("Error: Updating msix irq info for entry %d\n", entry_nr);
> +
> +        if (xc_physdev_unmap_pirq(xen_xc, xen_domid, entry->pirq)) {
> +            PT_LOG("Error: Unmapping of MSI-X failed.\n");
> +        }
> +        entry->pirq = -1;
> +        return ret;
> +    }
> +
> +    entry->flags = 0;
> +
> +    return 0;
> +}
> +
> +int pt_msix_update(XenPCIPassthroughState *s)
> +{
> +    XenPTMSIX *msix = s->msix;
> +    int i;
> +
> +    for (i = 0; i < msix->total_entries; i++) {
> +        pt_msix_update_one(s, i);
> +    }
> +
> +    return 0;
> +}
> +
> +void pt_msix_disable(XenPCIPassthroughState *s)
> +{
> +    PCIDevice *d = &s->dev;
> +    uint8_t gvec = 0;
> +    uint32_t gflags = 0;
> +    uint64_t addr = 0;
> +    int i = 0;
> +    XenMSIXEntry *entry = NULL;
> +
> +    msix_set_enable(s, 0);
> +
> +    for (i = 0; i < s->msix->total_entries; i++) {
> +        entry = &s->msix->msix_entry[i];
> +
> +        if (entry->pirq == -1) {
> +            continue;
> +        }
> +
> +        gvec = entry->io_mem[2] & 0xff;
> +        addr = *(uint64_t *)&entry->io_mem[0];
> +        gflags = __get_msi_gflags(entry->io_mem[2], addr);
> +
> +        PT_LOG("Unbind msix with pirq %x, gvec %x\n",
> +                entry->pirq, gvec);
> +
> +        if (xc_domain_unbind_msi_irq(xen_xc, xen_domid, gvec,
> +                                        entry->pirq, gflags)) {
> +            PT_LOG("Error: Unbinding of MSI-X failed. [%02x:%02x.%x]\n",
> +                   pci_bus_num(d->bus), PCI_SLOT(d->devfn),
> +                   PCI_FUNC(d->devfn));
> +        } else {
> +            PT_LOG("Unmap msix with pirq %x\n", entry->pirq);
> +
> +            if (xc_physdev_unmap_pirq(xen_xc, xen_domid, entry->pirq)) {
> +                PT_LOG("Error: Unmapping of MSI-X failed. [%02x:%02x.%x]\n",
> +                       pci_bus_num(d->bus),
> +                       PCI_SLOT(d->devfn), PCI_FUNC(d->devfn));

There is a lot of those error reporting where the pci_bus_num, PCI_SLOT, etc
are used. Perhaps this should be in a function?

> +            }
> +        }
> +        /* clear msi-x info */
> +        entry->pirq = -1;
> +        entry->flags = 0;
> +    }
> +}
> +
> +int pt_msix_update_remap(XenPCIPassthroughState *s, int bar_index)
> +{
> +    XenMSIXEntry *entry;
> +    int i, ret;
> +
> +    if (!(s->msix && s->msix->bar_index == bar_index)) {
> +        return 0;
> +    }
> +
> +    for (i = 0; i < s->msix->total_entries; i++) {
> +        entry = &s->msix->msix_entry[i];
> +        if (entry->pirq != -1) {
> +            ret = xc_domain_unbind_pt_irq(xen_xc, xen_domid, entry->pirq,
> +                                          PT_IRQ_TYPE_MSI, 0, 0, 0, 0);
> +            if (ret) {
> +                PT_LOG("Error: unbind MSI-X entry %d failed\n", entry->pirq);
> +            }
> +            entry->flags = 1;
> +        }
> +    }
> +    pt_msix_update(s);
> +
> +    return 0;
> +}
> +
> +static void pci_msix_invalid_write(void *opaque, target_phys_addr_t addr,
> +                                   uint32_t val)
> +{
> +    PT_LOG("Error: Invalid write to MSI-X table,"
> +           " only dword access is allowed.\n");
> +}
> +
> +static void pci_msix_writel(void *opaque, target_phys_addr_t addr,
> +                            uint32_t val)
> +{
> +    XenPCIPassthroughState *s = (XenPCIPassthroughState *)opaque;
> +    XenPTMSIX *msix = s->msix;
> +    XenMSIXEntry *entry;
> +    int entry_nr, offset;
> +    void *phys_off;
> +    uint32_t vec_ctrl;
> +
> +    if (addr % 4) {
> +        PT_LOG("Error: Unaligned dword access to MSI-X table, "
> +                "addr %016"PRIx64"\n", addr);
> +        return;
> +    }
> +
> +    PT_LOG("addr: "TARGET_FMT_plx", val: %#x\n", addr, val);

Huh?

> +
> +    entry_nr = addr / 16;
> +    entry = &msix->msix_entry[entry_nr];
> +    offset = (addr % 16) / 4;
> +
> +    /*
> +     * If Xen intercepts the mask bit access, io_mem[3] may not be
> +     * up-to-date. Read from hardware directly.
> +     */
> +    phys_off = s->msix->phys_iomem_base + 16 * entry_nr + 12;
> +    vec_ctrl = *(uint32_t *)phys_off;
> +
> +    if (offset != 3 && msix->enabled && !(vec_ctrl & 0x1)) {
> +        PT_LOG("Error: Can't update msix entry %d since MSI-X is already "
> +                "function.\n", entry_nr);

already function? already on? active?


> +        return;
> +    }
> +
> +    if (offset != 3 && entry->io_mem[offset] != val) {
> +        entry->flags = 1;
> +    }
> +    entry->io_mem[offset] = val;
> +
> +    if (offset == 3) {
> +        if (msix->enabled && !(val & 0x1)) {
> +            pt_msix_update_one(s, entry_nr);
> +        }
> +        mask_physical_msix_entry(s, entry_nr, entry->io_mem[3] & 0x1);
> +    }
> +}
> +
> +static CPUWriteMemoryFunc *pci_msix_write[] = {
> +    pci_msix_invalid_write,
> +    pci_msix_invalid_write,
> +    pci_msix_writel
> +};
> +
> +static uint32_t pci_msix_invalid_read(void *opaque, target_phys_addr_t addr)
> +{
> +    PT_LOG("Error: Invalid read to MSI-X table,"
> +           " only dword access is allowed.\n");
> +    return 0;
> +}
> +
> +static uint32_t pci_msix_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    XenPCIPassthroughState *s = (XenPCIPassthroughState *)opaque;
> +    XenPTMSIX *msix = s->msix;
> +    int entry_nr, offset;
> +
> +    if (addr % 4) {
> +        PT_LOG("Error: Unaligned dword access to MSI-X table, "
> +                "addr %016"PRIx64"\n", addr);
> +        return 0;
> +    }
> +
> +    PT_LOG("addr: "TARGET_FMT_plx"\n", addr);
> +
> +    entry_nr = addr / 16;
> +    offset = (addr % 16) / 4;
> +
> +    return msix->msix_entry[entry_nr].io_mem[offset];
> +}
> +
> +static CPUReadMemoryFunc *pci_msix_read[] = {
> +    pci_msix_invalid_read,
> +    pci_msix_invalid_read,
> +    pci_msix_readl
> +};
> +
> +int pt_add_msix_mapping(XenPCIPassthroughState *s, int bar_index)
> +{
> +    if (!(s->msix && s->msix->bar_index == bar_index)) {
> +        return 0;
> +    }
> +
> +    return xc_domain_memory_mapping(xen_xc, xen_domid,
> +         s->msix->mmio_base_addr >> XC_PAGE_SHIFT,
> +         (s->bases[bar_index].access.maddr + s->msix->table_off)
> +             >> XC_PAGE_SHIFT,
> +         (s->msix->total_entries * 16 + XC_PAGE_SIZE - 1) >> XC_PAGE_SHIFT,
> +         DPCI_ADD_MAPPING);
> +}
> +
> +int pt_remove_msix_mapping(XenPCIPassthroughState *s, int bar_index)
> +{
> +    if (!(s->msix && s->msix->bar_index == bar_index)) {
> +        return 0;
> +    }
> +
> +    s->msix->mmio_base_addr = s->bases[bar_index].e_physbase
> +        + s->msix->table_off;
> +
> +    cpu_register_physical_memory(s->msix->mmio_base_addr,
> +                                 s->msix->total_entries * 16,
> +                                 s->msix->mmio_index);
> +
> +    return xc_domain_memory_mapping(xen_xc, xen_domid,
> +         s->msix->mmio_base_addr >> XC_PAGE_SHIFT,
> +         (s->bases[bar_index].access.maddr + s->msix->table_off)
> +             >> XC_PAGE_SHIFT,
> +         (s->msix->total_entries * 16 + XC_PAGE_SIZE - 1) >> XC_PAGE_SHIFT,
> +         DPCI_REMOVE_MAPPING);
> +}
> +
> +int pt_msix_init(XenPCIPassthroughState *s, int base)
> +{
> +    uint8_t id;
> +    uint16_t control;
> +    int i, total_entries, table_off, bar_index;
> +    HostPCIDevice *d = s->real_device;
> +    int fd;
> +
> +    id = host_pci_get_byte(d, base + PCI_CAP_LIST_ID);
> +
> +    if (id != PCI_CAP_ID_MSIX) {
> +        PT_LOG("Error: Invalid id %#x base %#x\n", id, base);
> +        return -1;
> +    }
> +
> +    control = host_pci_get_word(d, base + 2);
> +    total_entries = control & 0x7ff;
> +    total_entries += 1;
> +
> +    s->msix = g_malloc0(sizeof (XenPTMSIX)
> +                        + total_entries * sizeof (XenMSIXEntry));
> +
> +    s->msix->total_entries = total_entries;
> +    for (i = 0; i < total_entries; i++) {
> +        s->msix->msix_entry[i].pirq = -1;
> +    }
> +
> +    s->msix->mmio_index =
> +        cpu_register_io_memory(pci_msix_read, pci_msix_write,
> +                               s, DEVICE_NATIVE_ENDIAN);
> +
> +    table_off = host_pci_get_long(d, base + PCI_MSIX_TABLE);
> +    bar_index = s->msix->bar_index = table_off & PCI_MSIX_FLAGS_BIRMASK;
> +    table_off = s->msix->table_off = table_off & ~PCI_MSIX_FLAGS_BIRMASK;
> +    s->msix->table_base = s->real_device->io_regions[bar_index].base_addr;
> +    PT_LOG("get MSI-X table bar base %#"PRIx64"\n", s->msix->table_base);
> +
> +    fd = open("/dev/mem", O_RDWR);
> +    if (fd == -1) {
> +        PT_LOG("Error: Can't open /dev/mem: %s\n", strerror(errno));
> +        goto error_out;
> +    }
> +    PT_LOG("table_off = %#x, total_entries = %d\n", table_off, 
> total_entries);
> +    s->msix->table_offset_adjust = table_off & 0x0fff;
> +    s->msix->phys_iomem_base =
> +        mmap(0,
> +             total_entries * 16 + s->msix->table_offset_adjust,
> +             PROT_WRITE | PROT_READ,
> +             MAP_SHARED | MAP_LOCKED,
> +             fd,
> +             s->msix->table_base + table_off - s->msix->table_offset_adjust);
> +
> +    if (s->msix->phys_iomem_base == MAP_FAILED) {
> +        PT_LOG("Error: Can't map physical MSI-X table: %s\n", 
> strerror(errno));
> +        close(fd);
> +        goto error_out;
> +    }
> +    s->msix->phys_iomem_base = (char *)s->msix->phys_iomem_base
> +        + s->msix->table_offset_adjust;
> +
> +    close(fd);
> +
> +    PT_LOG("mapping physical MSI-X table to %p\n", s->msix->phys_iomem_base);
> +    return 0;
> +
> +error_out:
> +    g_free(s->msix);
> +    s->msix = NULL;
> +    return -1;
> +}
> +
> +void pt_msix_delete(XenPCIPassthroughState *s)
> +{
> +    /* unmap the MSI-X memory mapped register area */
> +    if (s->msix->phys_iomem_base) {
> +        PT_LOG("unmapping physical MSI-X table from %lx\n",
> +           (unsigned long)s->msix->phys_iomem_base);
> +        munmap(s->msix->phys_iomem_base, s->msix->total_entries * 16 +
> +           s->msix->table_offset_adjust);
> +    }
> +
> +    if (s->msix->mmio_index > 0) {
> +        cpu_unregister_io_memory(s->msix->mmio_index);
> +    }
> +
> +    g_free(s->msix);
> +    s->msix = NULL;
> +}
> -- 
> Anthony PERARD
> 
> 
> _______________________________________________
> Xen-devel mailing list
> address@hidden
> http://lists.xensource.com/xen-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]