qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 899140] [NEW] Problem with Linux Kernel Traffic Contro


From: Vincent Autefage
Subject: [Qemu-devel] [Bug 899140] [NEW] Problem with Linux Kernel Traffic Control
Date: Fri, 02 Dec 2011 12:57:41 -0000

Public bug reported:

Hi,

The two last main versions of QEMU (0.15 and 1.0) have an important problem 
when running on a Linux distribution which running itself a Traffic Control 
(TC) instance.
Indeed, when TC is configured with a Token Bucket Filter (TBF) with a 
particular rate, the effective rate is very slower than the desired one.

For instance, lets consider the following configuration :

# tc qdisc add dev eth0 root tbf rate 20mbit burst 20k latency 50ms

The effective rate will be about 100kbit/s ! (verified with iperf)
I've encountered this problem on versions 0.15 and 1.0 but not with the 0.14...
In the 0.14, we have a rate of 19.2 mbit/s which is quiet normal.

I've done the experimentation on several hosts :
 
- Debian 32bit core i7, 4GB RAM
- Debian 64bit core i7, 8GB RAM
- 3 different high performance servers : Ubuntu 64 bits, 48 AMD Opteron, 128GB 
of RAM

The problem is always the same... The problem is also seen with a Class
Based Queuing (CBQ) in TC.

Thanks

** Affects: qemu
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/899140

Title:
  Problem with Linux Kernel Traffic Control

Status in QEMU:
  New

Bug description:
  Hi,

  The two last main versions of QEMU (0.15 and 1.0) have an important problem 
when running on a Linux distribution which running itself a Traffic Control 
(TC) instance.
  Indeed, when TC is configured with a Token Bucket Filter (TBF) with a 
particular rate, the effective rate is very slower than the desired one.

  For instance, lets consider the following configuration :

  # tc qdisc add dev eth0 root tbf rate 20mbit burst 20k latency 50ms

  The effective rate will be about 100kbit/s ! (verified with iperf)
  I've encountered this problem on versions 0.15 and 1.0 but not with the 
0.14...
  In the 0.14, we have a rate of 19.2 mbit/s which is quiet normal.

  I've done the experimentation on several hosts :
   
  - Debian 32bit core i7, 4GB RAM
  - Debian 64bit core i7, 8GB RAM
  - 3 different high performance servers : Ubuntu 64 bits, 48 AMD Opteron, 
128GB of RAM

  The problem is always the same... The problem is also seen with a
  Class Based Queuing (CBQ) in TC.

  Thanks

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/899140/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]