[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v9 3/3] pc: Support system flash memory with pfl
From: |
Jordan Justen |
Subject: |
Re: [Qemu-devel] [PATCH v9 3/3] pc: Support system flash memory with pflash |
Date: |
Sun, 19 Feb 2012 16:39:07 -0800 |
On Mon, Jan 9, 2012 at 01:28, Kevin Wolf <address@hidden> wrote:
> Am 19.12.2011 23:19, schrieb Anthony Liguori:
>> On 12/19/2011 03:25 PM, Jordan Justen wrote:
>>> On Mon, Dec 19, 2011 at 11:41, Anthony Liguori<address@hidden> wrote:
>>>> On 12/15/2011 02:51 PM, Jordan Justen wrote:
>>>>>
>>>>> If a pflash image is found, then it is used for the system
>>>>> firmware image.
>>>>>
>>>>> If a pflash image is not initially found, then a read-only
>>>>> pflash device is created using the -bios filename.
>>>>>
>>>>> KVM cannot execute from a pflash region currently.
>>>>> Therefore, when KVM is enabled, a (read-only) ram memory
>>>>> region is created and filled with the contents of the
>>>>> pflash drive.
>>>>>
>>>>> Signed-off-by: Jordan Justen<address@hidden>
>>>>> Cc: Anthony Liguori<address@hidden>
>>>>> ---
>>>>> Makefile.target | 1 +
>>>>> default-configs/i386-softmmu.mak | 1 +
>>>>> default-configs/x86_64-softmmu.mak | 1 +
>>>>> hw/boards.h | 1 +
>>>>> hw/pc.c | 55 +-------
>>>>> hw/pc.h | 4 +
>>>>> hw/pc_sysfw.c | 255
>>>>> ++++++++++++++++++++++++++++++++++++
>>>>> vl.c | 2 +-
>>>>> 8 files changed, 269 insertions(+), 51 deletions(-)
>>>>> create mode 100644 hw/pc_sysfw.c
>>>>>
>>>>> diff --git a/Makefile.target b/Makefile.target
>>>>> index a111521..b1dc882 100644
>>>>> --- a/Makefile.target
>>>>> +++ b/Makefile.target
>>>>> @@ -236,6 +236,7 @@ obj-i386-y += vmport.o
>>>>> obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
>>>>> obj-i386-y += debugcon.o multiboot.o
>>>>> obj-i386-y += pc_piix.o
>>>>> +obj-i386-y += pc_sysfw.o
>>>>> obj-i386-$(CONFIG_KVM) += kvmclock.o
>>>>> obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
>>>>>
>>>>> diff --git a/default-configs/i386-softmmu.mak
>>>>> b/default-configs/i386-softmmu.mak
>>>>> index e67ebb3..cd407a9 100644
>>>>> --- a/default-configs/i386-softmmu.mak
>>>>> +++ b/default-configs/i386-softmmu.mak
>>>>> @@ -22,3 +22,4 @@ CONFIG_SOUND=y
>>>>> CONFIG_HPET=y
>>>>> CONFIG_APPLESMC=y
>>>>> CONFIG_I8259=y
>>>>> +CONFIG_PFLASH_CFI01=y
>>>>> diff --git a/default-configs/x86_64-softmmu.mak
>>>>> b/default-configs/x86_64-softmmu.mak
>>>>> index b75757e..47734ea 100644
>>>>> --- a/default-configs/x86_64-softmmu.mak
>>>>> +++ b/default-configs/x86_64-softmmu.mak
>>>>> @@ -22,3 +22,4 @@ CONFIG_SOUND=y
>>>>> CONFIG_HPET=y
>>>>> CONFIG_APPLESMC=y
>>>>> CONFIG_I8259=y
>>>>> +CONFIG_PFLASH_CFI01=y
>>>>> diff --git a/hw/boards.h b/hw/boards.h
>>>>> index 716fd7b..45a31a1 100644
>>>>> --- a/hw/boards.h
>>>>> +++ b/hw/boards.h
>>>>> @@ -33,6 +33,7 @@ typedef struct QEMUMachine {
>>>>> } QEMUMachine;
>>>>>
>>>>> int qemu_register_machine(QEMUMachine *m);
>>>>> +QEMUMachine *find_default_machine(void);
>>>>>
>>>>> extern QEMUMachine *current_machine;
>>>>>
>>>>> diff --git a/hw/pc.c b/hw/pc.c
>>>>> index cc6cfad..e5550ca 100644
>>>>> --- a/hw/pc.c
>>>>> +++ b/hw/pc.c
>>>>> @@ -57,10 +57,6 @@
>>>>> #define DPRINTF(fmt, ...)
>>>>> #endif
>>>>>
>>>>> -#define BIOS_FILENAME "bios.bin"
>>>>> -
>>>>> -#define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
>>>>> -
>>>>> /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.
>>>>> */
>>>>> #define ACPI_DATA_SIZE 0x10000
>>>>> #define BIOS_CFG_IOPORT 0x510
>>>>> @@ -974,11 +970,9 @@ void pc_memory_init(MemoryRegion *system_memory,
>>>>> MemoryRegion **ram_memory,
>>>>> int system_firmware_enabled)
>>>>> {
>>>>> - char *filename;
>>>>> - int ret, linux_boot, i;
>>>>> - MemoryRegion *ram, *bios, *isa_bios, *option_rom_mr;
>>>>> + int linux_boot, i;
>>>>> + MemoryRegion *ram, *option_rom_mr;
>>>>> MemoryRegion *ram_below_4g, *ram_above_4g;
>>>>> - int bios_size, isa_bios_size;
>>>>> void *fw_cfg;
>>>>>
>>>>> linux_boot = (kernel_filename != NULL);
>>>>> @@ -1003,43 +997,9 @@ void pc_memory_init(MemoryRegion *system_memory,
>>>>> ram_above_4g);
>>>>> }
>>>>>
>>>>> - /* BIOS load */
>>>>> - if (bios_name == NULL)
>>>>> - bios_name = BIOS_FILENAME;
>>>>> - filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
>>>>> - if (filename) {
>>>>> - bios_size = get_image_size(filename);
>>>>> - } else {
>>>>> - bios_size = -1;
>>>>> - }
>>>>> - if (bios_size<= 0 ||
>>>>> - (bios_size % 65536) != 0) {
>>>>> - goto bios_error;
>>>>> - }
>>>>> - bios = g_malloc(sizeof(*bios));
>>>>> - memory_region_init_ram(bios, NULL, "pc.bios", bios_size);
>>>>> - memory_region_set_readonly(bios, true);
>>>>> - ret = rom_add_file_fixed(bios_name, (uint32_t)(-bios_size), -1);
>>>>> - if (ret != 0) {
>>>>> - bios_error:
>>>>> - fprintf(stderr, "qemu: could not load PC BIOS '%s'\n",
>>>>> bios_name);
>>>>> - exit(1);
>>>>> - }
>>>>> - if (filename) {
>>>>> - g_free(filename);
>>>>> - }
>>>>> - /* map the last 128KB of the BIOS in ISA space */
>>>>> - isa_bios_size = bios_size;
>>>>> - if (isa_bios_size> (128 * 1024))
>>>>> - isa_bios_size = 128 * 1024;
>>>>> - isa_bios = g_malloc(sizeof(*isa_bios));
>>>>> - memory_region_init_alias(isa_bios, "isa-bios", bios,
>>>>> - bios_size - isa_bios_size, isa_bios_size);
>>>>> - memory_region_add_subregion_overlap(rom_memory,
>>>>> - 0x100000 - isa_bios_size,
>>>>> - isa_bios,
>>>>> - 1);
>>>>> - memory_region_set_readonly(isa_bios, true);
>>>>> +
>>>>> + /* Initialize ROM or flash ranges for PC firmware */
>>>>> + pc_system_firmware_init(rom_memory, system_firmware_enabled);
>>>>>
>>>>> option_rom_mr = g_malloc(sizeof(*option_rom_mr));
>>>>> memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE);
>>>>> @@ -1048,11 +1008,6 @@ void pc_memory_init(MemoryRegion *system_memory,
>>>>> option_rom_mr,
>>>>> 1);
>>>>>
>>>>> - /* map all the bios at the top of memory */
>>>>> - memory_region_add_subregion(rom_memory,
>>>>> - (uint32_t)(-bios_size),
>>>>> - bios);
>>>>> -
>>>>> fw_cfg = bochs_bios_init();
>>>>> rom_set_fw(fw_cfg);
>>>>>
>>>>> diff --git a/hw/pc.h b/hw/pc.h
>>>>> index 49471cb..727e231 100644
>>>>> --- a/hw/pc.h
>>>>> +++ b/hw/pc.h
>>>>> @@ -246,6 +246,10 @@ static inline bool isa_ne2000_init(int base, int irq,
>>>>> NICInfo *nd)
>>>>> return true;
>>>>> }
>>>>>
>>>>> +/* pc_sysfw.c */
>>>>> +void pc_system_firmware_init(MemoryRegion *rom_memory,
>>>>> + int system_firmware_enabled);
>>>>> +
>>>>> /* e820 types */
>>>>> #define E820_RAM 1
>>>>> #define E820_RESERVED 2
>>>>> diff --git a/hw/pc_sysfw.c b/hw/pc_sysfw.c
>>>>> new file mode 100644
>>>>> index 0000000..20027b2
>>>>> --- /dev/null
>>>>> +++ b/hw/pc_sysfw.c
>>>>> @@ -0,0 +1,255 @@
>>>>> +/*
>>>>> + * QEMU PC System Firmware
>>>>> + *
>>>>> + * Copyright (c) 2003-2004 Fabrice Bellard
>>>>> + * Copyright (c) 2011 Intel Corporation
>>>>> + *
>>>>> + * Permission is hereby granted, free of charge, to any person obtaining
>>>>> a copy
>>>>> + * of this software and associated documentation files (the "Software"),
>>>>> to deal
>>>>> + * in the Software without restriction, including without limitation the
>>>>> rights
>>>>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
>>>>> sell
>>>>> + * copies of the Software, and to permit persons to whom the Software is
>>>>> + * furnished to do so, subject to the following conditions:
>>>>> + *
>>>>> + * The above copyright notice and this permission notice shall be
>>>>> included in
>>>>> + * all copies or substantial portions of the Software.
>>>>> + *
>>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>>>> EXPRESS OR
>>>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>>>>> MERCHANTABILITY,
>>>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>>>>> SHALL
>>>>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>>>>> OTHER
>>>>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>>>>> ARISING FROM,
>>>>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>>>>> IN
>>>>> + * THE SOFTWARE.
>>>>> + */
>>>>> +
>>>>> +#include "hw.h"
>>>>> +#include "pc.h"
>>>>> +#include "hw/boards.h"
>>>>> +#include "loader.h"
>>>>> +#include "sysemu.h"
>>>>> +#include "flash.h"
>>>>> +#include "kvm.h"
>>>>> +
>>>>> +#define BIOS_FILENAME "bios.bin"
>>>>> +
>>>>> +static void pc_isa_bios_init(MemoryRegion *rom_memory,
>>>>> + MemoryRegion *flash_mem,
>>>>> + int ram_size)
>>>>> +{
>>>>> + int isa_bios_size;
>>>>> + MemoryRegion *isa_bios;
>>>>> + uint64_t flash_size;
>>>>> + void *flash_ptr, *isa_bios_ptr;
>>>>> +
>>>>> + flash_size = memory_region_size(flash_mem);
>>>>> +
>>>>> + /* map the last 128KB of the BIOS in ISA space */
>>>>> + isa_bios_size = flash_size;
>>>>> + if (isa_bios_size> (128 * 1024)) {
>>>>> + isa_bios_size = 128 * 1024;
>>>>> + }
>>>>> + isa_bios = g_malloc(sizeof(*isa_bios));
>>>>> + memory_region_init_ram(isa_bios, NULL, "isa-bios", isa_bios_size);
>>>>> + memory_region_add_subregion_overlap(rom_memory,
>>>>> + 0x100000 - isa_bios_size,
>>>>> + isa_bios,
>>>>> + 1);
>>>>> +
>>>>> + /* copy ISA rom image from top of flash memory */
>>>>> + flash_ptr = memory_region_get_ram_ptr(flash_mem);
>>>>> + isa_bios_ptr = memory_region_get_ram_ptr(isa_bios);
>>>>> + memcpy(isa_bios_ptr,
>>>>> + ((uint8_t*)flash_ptr) + (flash_size - isa_bios_size),
>>>>> + isa_bios_size);
>>>>> +
>>>>> + memory_region_set_readonly(isa_bios, true);
>>>>> +}
>>>>> +
>>>>> +static void pc_fw_add_pflash_drv(void)
>>>>> +{
>>>>> + QemuOpts *opts;
>>>>> + QEMUMachine *machine;
>>>>> + char *filename;
>>>>> +
>>>>> + if (bios_name == NULL) {
>>>>> + bios_name = BIOS_FILENAME;
>>>>> + }
>>>>> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
>>>>> +
>>>>> + opts = drive_add(IF_PFLASH, -1, filename, "readonly=on");
>>>>> + if (opts == NULL) {
>>>>> + return;
>>>>> + }
>>>>> +
>>>>> + machine = find_default_machine();
>>>>> + if (machine == NULL) {
>>>>> + return;
>>>>> + }
>>>>> +
>>>>> + drive_init(opts, machine->use_scsi);
>>>>> +}
>>>>> +
>>>>> +static void pc_system_flash_init(MemoryRegion *rom_memory,
>>>>> + DriveInfo *pflash_drv)
>>>>> +{
>>>>> + BlockDriverState *bdrv;
>>>>> + int64_t size;
>>>>> + target_phys_addr_t phys_addr;
>>>>> + int sector_bits, sector_size;
>>>>> + pflash_t *system_flash;
>>>>> + MemoryRegion *flash_mem;
>>>>> +
>>>>> + bdrv = pflash_drv->bdrv;
>>>>> + size = bdrv_getlength(pflash_drv->bdrv);
>>>>> + sector_bits = 12;
>>>>> + sector_size = 1<< sector_bits;
>>>>> +
>>>>> + if ((size % sector_size) != 0) {
>>>>> + fprintf(stderr,
>>>>> + "qemu: PC system firmware (pflash) must be a multiple of
>>>>> 0x%x\n",
>>>>> + sector_size);
>>>>> + exit(1);
>>>>> + }
>>>>> +
>>>>> + phys_addr = 0x100000000ULL - size;
>>>>> + system_flash = pflash_cfi01_register(phys_addr, NULL, "system.flash",
>>>>> size,
>>>>> + bdrv, sector_size, size>>
>>>>> sector_bits,
>>>>> + 1, 0x0000, 0x0000, 0x0000,
>>>>> 0x0000, 0);
>>>>> + flash_mem = pflash_cfi01_get_memory(system_flash);
>>>>> +
>>>>> + pc_isa_bios_init(rom_memory, flash_mem, size);
>>>>> +}
>>>>> +
>>>>> +static void pc_system_rom_init(MemoryRegion *rom_memory,
>>>>> + DriveInfo *pflash_drv)
>>>>> +{
>>>>> + BlockDriverState *bdrv;
>>>>> + int64_t size;
>>>>> + target_phys_addr_t phys_addr;
>>>>> + int sector_bits, sector_size;
>>>>> + MemoryRegion *sys_rom;
>>>>> + void *buffer;
>>>>> + int ret;
>>>>> +
>>>>> + bdrv = pflash_drv->bdrv;
>>>>> + size = bdrv_getlength(pflash_drv->bdrv);
>>>>> + sector_bits = 9;
>>>>> + sector_size = 1<< sector_bits;
>>>>> +
>>>>> + if ((size % sector_size) != 0) {
>>>>> + fprintf(stderr,
>>>>> + "qemu: PC system rom (pflash) must be a multiple of
>>>>> 0x%x\n",
>>>>> + sector_size);
>>>>> + exit(1);
>>>>> + }
>>>>> +
>>>>> + phys_addr = 0x100000000ULL - size;
>>>>> + sys_rom = g_malloc(sizeof(*sys_rom));
>>>>> + memory_region_init_ram(sys_rom, NULL, "system.rom", size);
>>>>> + buffer = memory_region_get_ram_ptr(sys_rom);
>>>>> + memory_region_add_subregion(rom_memory, phys_addr, sys_rom);
>>>>> +
>>>>> + /* read the rom content */
>>>>> + ret = bdrv_read(bdrv, 0, buffer, size>> sector_bits);
>>>>
>>>>
>>>> I think we're trying to get rid of synchronous block I/O in machine
>>>> initialization for a number of reasons.
>>>>
>>>> Kevin/Stefan, care to comment? Will this be problematic in the future?
>>>
>>> I was hoping pc-1.1 with and without kvm could be as close as
>>> possible, but I guess I can make pc-1.1 with kvm behave the same as
>>> pc-1.0. Then I can delete pc_system_rom_init.
>>
>> I think your general approach is right, I'm just not sure what we're going
>> to do
>> short term about synchronous I/O in the machine init routines. It may just
>> be a
>> matter of structuring this in such a way that you can use an async interface.
>
> I don't think there is a problem with using the synchronous interface
> here. But I'm not sure if having any I/O in the machine init is a good
> idea with respect to migration. Didn't we already have to move some code
> there to a later stage to make sure that the destination doesn't use
> outdated data?
Since the bdrv_read call seems to be the concern here, I noticed that
in hw/pflash_cfi01.c pflash_cfi01_register there is a call to
bdrv_read. So, it seems like it is not possible to initialize a
pflash/cfi device without a bdrv_read call being made.
So, what should pflash/cfi be doing instead? Should these devices
somehow hold off on initializing their contents from the drive until a
later stage? If so, is there a later call into the devices before the
firmware is launched that could be used for this later initialization
step?
-Jordan
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v9 3/3] pc: Support system flash memory with pflash,
Jordan Justen <=