qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH] pci: set memory type for memory behind the bridge


From: Michael S. Tsirkin
Subject: [Qemu-devel] [PATCH] pci: set memory type for memory behind the bridge
Date: Tue, 21 Feb 2012 15:57:58 +0200
User-agent: Mutt/1.5.21 (2010-09-15)

As we make upper bits in IO and prefetcheable memory
registers writeable, we should declare support
for 64 bit prefetcheable memory and 32 bit io
in the bridge.

This changes the default for apb, dec, but I'm guessing
they got the defaults wrong by accident.
Alternatively, we could let bridges declare lack of
64 bit support and make the upper bits read-only zero.

With this applied, we can drop these bits
from express code.

Reported-by: Gerd Hoffmann <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>

Could someone familiar with apb,dec ack this please?

---
 hw/pci.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/hw/pci.c b/hw/pci.c
index 31d6a5f..3ca5f4c 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -611,7 +611,7 @@ static void pci_init_w1cmask(PCIDevice *dev)
                  PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY);
 }
 
-static void pci_init_wmask_bridge(PCIDevice *d)
+static void pci_init_mask_bridge(PCIDevice *d)
 {
     /* PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS and
        PCI_SEC_LETENCY_TIMER */
@@ -632,6 +632,14 @@ static void pci_init_wmask_bridge(PCIDevice *d)
     /* PCI_PREF_BASE_UPPER32 and PCI_PREF_LIMIT_UPPER32 */
     memset(d->wmask + PCI_PREF_BASE_UPPER32, 0xff, 8);
 
+    /* Supported memory and i/o types */
+    d->config[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_32;
+    d->config[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_32;
+    pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_BASE,
+                               PCI_PREF_RANGE_TYPE_64);
+    pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_LIMIT,
+                               PCI_PREF_RANGE_TYPE_64);
+
 /* TODO: add this define to pci_regs.h in linux and then in qemu. */
 #define  PCI_BRIDGE_CTL_VGA_16BIT      0x10    /* VGA 16-bit decode */
 #define  PCI_BRIDGE_CTL_DISCARD                0x100   /* Primary discard 
timer */
@@ -654,6 +662,9 @@ static void pci_init_wmask_bridge(PCIDevice *d)
      * completeness. */
     pci_set_word(d->w1cmask + PCI_BRIDGE_CONTROL,
                  PCI_BRIDGE_CTL_DISCARD_STATUS);
+    d->cmask[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_MASK;
+    pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_BASE,
+                               PCI_PREF_RANGE_TYPE_MASK);
 }
 
 static int pci_init_multifunction(PCIBus *bus, PCIDevice *dev)
@@ -775,7 +786,7 @@ static PCIDevice *do_pci_register_device(PCIDevice 
*pci_dev, PCIBus *bus,
     pci_init_wmask(pci_dev);
     pci_init_w1cmask(pci_dev);
     if (pc->is_bridge) {
-        pci_init_wmask_bridge(pci_dev);
+        pci_init_mask_bridge(pci_dev);
     }
     if (pci_init_multifunction(bus, pci_dev)) {
         pci_config_free(pci_dev);
-- 
1.7.9.111.gf3fb0



reply via email to

[Prev in Thread] Current Thread [Next in Thread]