qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCHv2] piix: fix up/down races + document


From: Alex Williamson
Subject: Re: [Qemu-devel] [PATCHv2] piix: fix up/down races + document
Date: Thu, 29 Mar 2012 10:53:38 -0600

On Thu, 2012-03-29 at 14:51 +0200, Michael S. Tsirkin wrote:
> piix acpi interface suffers from the following 2 issues:
> 
> 1.
> - delete device a
> - quickly add device b in another slot
> 
> if we do this before guest reads the down register,
> the down event is discarded and device will never
> be deleted.
> 
> 2.
> - delete device a
> - quickly reset before guest can respond
> 
> interrupt is reset and guest will never eject the device.
> 
> To fix this, we implement two changes:
> 
> 1. Add two new registers:
> CLR_UP
> CLR_DOWN
> bios will now write to these the value it read from UP/DOWN
> 
> 2. on reset, remove all devices which have DOWN bit set
> 
> For compatibility with old guests, we also clear
> the DOWN bit on write to EJ0 for a device.
> 
> This patch also adds more detailed documentation
> for the ACPI interface, including the semantics
> of both old and new registers.
> 
> Signed-off-by: Michael S. Tsirkin <address@hidden>
> ---
> 
> Changes from v1:
> - tweaked a comment about clearing down register on reset
> - documentation update
> 
>  docs/specs/acpi_pci_hotplug.txt |   68 +++++++++++++++++++++++++++++++----
>  hw/acpi_piix4.c                 |   75 +++++++++++++++++++++++++++++++-------
>  2 files changed, 121 insertions(+), 22 deletions(-)
> 
> diff --git a/docs/specs/acpi_pci_hotplug.txt b/docs/specs/acpi_pci_hotplug.txt
> index f0f74a7..a8398f9 100644
> --- a/docs/specs/acpi_pci_hotplug.txt
> +++ b/docs/specs/acpi_pci_hotplug.txt
> @@ -7,31 +7,83 @@ describes the interface between QEMU and the ACPI BIOS.
>  ACPI GPE block (IO ports 0xafe0-0xafe3, byte access):
>  -----------------------------------------
>  
> -Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject
> +Generic ACPI GPE block. Bit 1 (GPE.1) is used to notify PCI hotplug/hotunplug
>  event to ACPI BIOS, via SCI interrupt.
>  
> -PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte 
> access):
> +Semantics: this event occurs each time a bit in either Pending PCI slot
> +injection notification or Pending PCI slot removal notification registers
> +changes status from 0 to 1.
> +
> +Pending PCI slot injection notification (IO port 0xae00-0xae03, 4-byte 
> access):
>  ---------------------------------------------------------------
> -Slot injection notification pending. One bit per slot.
> +Slot injection notification is pending. One bit per slot.
> +Guests should not write this register, in practice the value
> +written overwrites the register.

Sorry if I'm behind on the discussion, but why do we need to define
0xae0c & 0xae10 below for write-only access when these registers (0xae00
& 0xae04) are effectively read-only (yes, write is there, but it should
*never* be used in the current implementation)?  Thanks,

Alex

>  Read by ACPI BIOS GPE.1 handler to notify OS of injection
>  events.
>  
> -PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
> +Semantics: after a slot is populated by hotplug, it is immediately enabled
> +and a bit in this register is set.
> +Reset value: 0
> +
> +Pending PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
>  -----------------------------------------------------
> -Slot removal notification pending. One bit per slot.
> +Slot removal notification is pending. One bit per slot.
> +Guests should not write this register, in practice the value
> +written overwrites the register.
>  
>  Read by ACPI BIOS GPE.1 handler to notify OS of removal
>  events.
>  
> +Semantics: upon hotunplug request, a bit in this register is set
> +and the OSPM is notified about hotunplug request, but a slot remains enabled
> +until eject.
> +Reset value: 0
> +
>  PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
>  ----------------------------------------
>  
>  Used by ACPI BIOS _EJ0 method to request device removal. One bit per slot.
> -Reads return 0.
> +Guests should not read this register. In practice reads return 0.
> +
> +Semantics: selected hotunpluggable slots are disabled and powered off.
> +Has no effect on non-hotunpluggable slots.
> +
> +For compatibility with old BIOS, writes to this register
> +clear bits in pending slot injection notification register.
>  
>  PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
>  -----------------------------------------------
>  
> -Used by ACPI BIOS _RMV method to indicate removability status to OS. One
> -bit per slot.
> +Used by ACPI BIOS _RMV method to detect removability status
> +and report to OS. One bit per slot.
> +Guests should not write this register, in practice the value
> +written is discarded.
> +
> +Semantics: selected slots support hotplug. Contents of this register
> +do not change while guest is running.
> +
> +Clear PCI slot injection notification (IO port 0xae10-0xae14, 4-byte access):
> +---------------------------------------------------------------
> +Clears bits in pending slot injection notification register. One bit per 
> slot.
> +Guests should not read this register. In practice reads return 0.
> +
> +Written to by ACPI BIOS GPE.1 handler after reading the
> +pending slot injection notification register and before
> +notifying OS of injection events.
> +
> +Semantics: used to acknowledge the injection notification.
> +Does not affect slot status.
> +
> +Clear PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
> +-----------------------------------------------------
> +Clears bits in slot removal notification pending register. One bit per slot.
> +Guests should not read this register. In practice reads return 0.
> +
> +Written to by ACPI BIOS GPE.1 handler after reading the
> +pending slot removal notification register and before
> +notifying OS of removal events.
> +
> +Semantics: used to acknowledge the hotunplug request.
> +Does not affect slot status.
> diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
> index 797ed24..50553fd 100644
> --- a/hw/acpi_piix4.c
> +++ b/hw/acpi_piix4.c
> @@ -43,6 +43,8 @@
>  #define PCI_BASE 0xae00
>  #define PCI_EJ_BASE 0xae08
>  #define PCI_RMV_BASE 0xae0c
> +#define PCI_CLR_UP_BASE 0xae10
> +#define PCI_CLR_DOWN_BASE 0xae14
>  
>  #define PIIX4_PCI_HOTPLUG_STATUS 2
>  
> @@ -287,6 +289,28 @@ static void piix4_update_hotplug(PIIX4PMState *s)
>      }
>  }
>  
> +static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots)
> +{
> +    DeviceState *qdev, *next;
> +    BusState *bus = qdev_get_parent_bus(&s->dev.qdev);
> +    int slot = ffs(slots) - 1;
> +
> +    /*
> +     * Clear DOWN register - this is good for a case where guest can't
> +     * write to CLR_DOWN because of VM reset, and for compatibility with
> +     * old guests which do not have CLR_DOWN.
> +     */
> +    s->pci0_status.down &= ~(1U << slot);
> +
> +    QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
> +        PCIDevice *dev = PCI_DEVICE(qdev);
> +        PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
> +        if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
> +            qdev_free(qdev);
> +        }
> +    }
> +}
> +
>  static void piix4_reset(void *opaque)
>  {
>      PIIX4PMState *s = opaque;
> @@ -302,6 +326,19 @@ static void piix4_reset(void *opaque)
>          pci_conf[0x5B] = 0x02;
>      }
>      piix4_update_hotplug(s);
> +    /*
> +     * Guest lost remove events if any.
> +     * As it's being reset it's safe to remove the device now.
> +     */
> +    while (s->pci0_status.down) {
> +        acpi_piix_eject_slot(s, s->pci0_status.down);
> +    }
> +    /*
> +     * Guest lost add events if any.
> +     * As it's being reset and will rescan the bus we can discard
> +     * past events now.
> +     */
> +    s->pci0_status.up = 0;
>  }
>  
>  static void piix4_powerdown(void *opaque, int irq, int power_failing)
> @@ -490,22 +527,31 @@ static uint32_t pciej_read(void *opaque, uint32_t addr)
>  
>  static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
>  {
> -    BusState *bus = opaque;
> -    DeviceState *qdev, *next;
> -    int slot = ffs(val) - 1;
> +    PIIX4PMState *s = opaque;
>  
> -    QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
> -        PCIDevice *dev = PCI_DEVICE(qdev);
> -        PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
> -        if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
> -            qdev_free(qdev);
> -        }
> +    if (val) {
> +        acpi_piix_eject_slot(s, val);
>      }
>  
> -
>      PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
>  }
>  
> +static void pci_clr_up_write(void *opaque, uint32_t addr, uint32_t val)
> +{
> +    PIIX4PMState *s = opaque;
> +    s->pci0_status.up &= ~val;
> +
> +    PIIX4_DPRINTF("pci_clr_up write %x <== %d\n", addr, val);
> +}
> +
> +static void pci_clr_down_write(void *opaque, uint32_t addr, uint32_t val)
> +{
> +    PIIX4PMState *s = opaque;
> +    s->pci0_status.down &= ~val;
> +
> +    PIIX4_DPRINTF("pci_clr_down write %x <== %d\n", addr, val);
> +}
> +
>  static uint32_t pcirmv_read(void *opaque, uint32_t addr)
>  {
>      PIIX4PMState *s = opaque;
> @@ -532,12 +578,15 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, 
> PIIX4PMState *s)
>      register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
>      register_ioport_read(PCI_BASE, 8, 4,  pcihotplug_read, pci0_status);
>  
> -    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
> -    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, bus);
> +    register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s);
> +    register_ioport_read(PCI_EJ_BASE, 4, 4,  pciej_read, s);
>  
>      register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
>      register_ioport_read(PCI_RMV_BASE, 4, 4,  pcirmv_read, s);
>  
> +    register_ioport_write(PCI_CLR_UP_BASE, 4, 4, pci_clr_up_write, s);
> +    register_ioport_write(PCI_CLR_DOWN_BASE, 4, 4, pci_clr_down_write, s);
> +
>      pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
>  }
>  
> @@ -567,8 +616,6 @@ static int piix4_device_hotplug(DeviceState *qdev, 
> PCIDevice *dev,
>          return 0;
>      }
>  
> -    s->pci0_status.up = 0;
> -    s->pci0_status.down = 0;
>      if (state == PCI_HOTPLUG_ENABLED) {
>          enable_device(s, slot);
>      } else {






reply via email to

[Prev in Thread] Current Thread [Next in Thread]