[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 11/16] hw/armv7m_nvic: Make the NVIC a freestanding
|
From: |
Peter Maydell |
|
Subject: |
[Qemu-devel] [PATCH 11/16] hw/armv7m_nvic: Make the NVIC a freestanding class |
|
Date: |
Tue, 19 Jun 2012 14:31:08 +0100 |
Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.
Signed-off-by: Peter Maydell <address@hidden>
---
hw/arm/Makefile.objs | 2 +-
hw/arm_gic.c | 241 +++----------------------------------------------
hw/arm_gic_common.c | 184 +++++++++++++++++++++++++++++++++++++
hw/arm_gic_internal.h | 136 ++++++++++++++++++++++++++++
hw/armv7m_nvic.c | 48 ++++++++---
5 files changed, 371 insertions(+), 240 deletions(-)
create mode 100644 hw/arm_gic_common.c
create mode 100644 hw/arm_gic_internal.h
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index a0ff6a6..88ff47d 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -6,7 +6,7 @@ obj-y += cadence_uart.o
obj-y += cadence_ttc.o
obj-y += cadence_gem.o
obj-y += xilinx_zynq.o zynq_slcr.o
-obj-y += arm_gic.o
+obj-y += arm_gic.o arm_gic_common.o
obj-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
diff --git a/hw/arm_gic.c b/hw/arm_gic.c
index ad5ab3c..ec22322 100644
--- a/hw/arm_gic.c
+++ b/hw/arm_gic.c
@@ -19,13 +19,7 @@
*/
#include "sysbus.h"
-
-/* Maximum number of possible interrupts, determined by the GIC architecture */
-#define GIC_MAXIRQ 1020
-/* First 32 are private to each CPU (SGIs and PPIs). */
-#define GIC_INTERNAL 32
-/* Maximum number of possible CPU interfaces, determined by GIC architecture */
-#define NCPU 8
+#include "arm_gic_internal.h"
//#define DEBUG_GIC
@@ -36,88 +30,12 @@ do { printf("arm_gic: " fmt , ## __VA_ARGS__); } while (0)
#define DPRINTF(fmt, ...) do {} while(0)
#endif
-/* The NVIC has 16 internal vectors. However these are not exposed
- through the normal GIC interface. */
-#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
-
static const uint8_t gic_id[] = {
0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1
};
-#define FROM_SYSBUSGIC(type, dev) \
- DO_UPCAST(type, gic, FROM_SYSBUS(gic_state, dev))
-
-typedef struct gic_irq_state
-{
- /* The enable bits are only banked for per-cpu interrupts. */
- unsigned enabled:NCPU;
- unsigned pending:NCPU;
- unsigned active:NCPU;
- unsigned level:NCPU;
- unsigned model:1; /* 0 = N:N, 1 = 1:N */
- unsigned trigger:1; /* nonzero = edge triggered. */
-} gic_irq_state;
-
-#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
#define NUM_CPU(s) ((s)->num_cpu)
-#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
-#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
-#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
-#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
-#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
-#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
-#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
-#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
-#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
-#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
-#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
-#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
-#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
-#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
-#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
-#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
-#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
-#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
-#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
- s->priority1[irq][cpu] : \
- s->priority2[(irq) - GIC_INTERNAL])
-#define GIC_TARGET(irq) s->irq_target[irq]
-
-typedef struct gic_state
-{
- SysBusDevice busdev;
- qemu_irq parent_irq[NCPU];
- int enabled;
- int cpu_enabled[NCPU];
-
- gic_irq_state irq_state[GIC_MAXIRQ];
- int irq_target[GIC_MAXIRQ];
- int priority1[GIC_INTERNAL][NCPU];
- int priority2[GIC_MAXIRQ - GIC_INTERNAL];
- int last_active[GIC_MAXIRQ][NCPU];
-
- int priority_mask[NCPU];
- int running_irq[NCPU];
- int running_priority[NCPU];
- int current_pending[NCPU];
-
- uint32_t num_cpu;
-
- MemoryRegion iomem; /* Distributor */
- /* This is just so we can have an opaque pointer which identifies
- * both this GIC and which CPU interface we should be accessing.
- */
- struct gic_state *backref[NCPU];
- MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
- uint32_t num_irq;
- uint32_t revision;
-} gic_state;
-
-/* The special cases for the revision property: */
-#define REV_11MPCORE 0
-#define REV_NVIC 0xffffffff
-
static inline int gic_get_current_cpu(gic_state *s)
{
if (s->num_cpu > 1) {
@@ -128,7 +46,7 @@ static inline int gic_get_current_cpu(gic_state *s)
/* TODO: Many places that call this routine could be optimized. */
/* Update interrupt status after enabled or pending bits have been changed. */
-static void gic_update(gic_state *s)
+void gic_update(gic_state *s)
{
int best_irq;
int best_prio;
@@ -166,8 +84,7 @@ static void gic_update(gic_state *s)
}
}
-#ifdef NVIC
-static void gic_set_pending_private(gic_state *s, int cpu, int irq)
+void gic_set_pending_private(gic_state *s, int cpu, int irq)
{
int cm = 1 << cpu;
@@ -178,7 +95,6 @@ static void gic_set_pending_private(gic_state *s, int cpu,
int irq)
GIC_SET_PENDING(irq, cm);
gic_update(s);
}
-#endif
/* Process a change in an external IRQ input. */
static void gic_set_irq(void *opaque, int irq, int level)
@@ -232,7 +148,7 @@ static void gic_set_running_irq(gic_state *s, int cpu, int
irq)
gic_update(s);
}
-static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
+uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
{
int new_irq;
int cm = 1 << cpu;
@@ -251,7 +167,7 @@ static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
return new_irq;
}
-static void gic_complete_irq(gic_state * s, int cpu, int irq)
+void gic_complete_irq(gic_state *s, int cpu, int irq)
{
int update = 0;
int cm = 1 << cpu;
@@ -623,7 +539,6 @@ static const MemoryRegionOps gic_dist_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-#ifndef NVIC
static uint32_t gic_cpu_read(gic_state *s, int cpu, int offset)
{
switch (offset) {
@@ -715,124 +630,10 @@ static const MemoryRegionOps gic_cpu_ops = {
.write = gic_do_cpu_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
-#endif
-static void gic_reset(DeviceState *dev)
+void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
{
- gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
- int i;
- memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
- for (i = 0 ; i < NUM_CPU(s); i++) {
- s->priority_mask[i] = 0xf0;
- s->current_pending[i] = 1023;
- s->running_irq[i] = 1023;
- s->running_priority[i] = 0x100;
- s->cpu_enabled[i] = 0;
- }
- for (i = 0; i < 16; i++) {
- GIC_SET_ENABLED(i, ALL_CPU_MASK);
- GIC_SET_TRIGGER(i);
- }
- if (s->num_cpu == 1) {
- /* For uniprocessor GICs all interrupts always target the sole CPU */
- for (i = 0; i < GIC_MAXIRQ; i++) {
- s->irq_target[i] = 1;
- }
- }
- s->enabled = 0;
-}
-
-static void gic_save(QEMUFile *f, void *opaque)
-{
- gic_state *s = (gic_state *)opaque;
- int i;
- int j;
-
- qemu_put_be32(f, s->enabled);
- for (i = 0; i < NUM_CPU(s); i++) {
- qemu_put_be32(f, s->cpu_enabled[i]);
- for (j = 0; j < GIC_INTERNAL; j++)
- qemu_put_be32(f, s->priority1[j][i]);
- for (j = 0; j < s->num_irq; j++)
- qemu_put_be32(f, s->last_active[j][i]);
- qemu_put_be32(f, s->priority_mask[i]);
- qemu_put_be32(f, s->running_irq[i]);
- qemu_put_be32(f, s->running_priority[i]);
- qemu_put_be32(f, s->current_pending[i]);
- }
- for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
- qemu_put_be32(f, s->priority2[i]);
- }
- for (i = 0; i < s->num_irq; i++) {
- qemu_put_be32(f, s->irq_target[i]);
- qemu_put_byte(f, s->irq_state[i].enabled);
- qemu_put_byte(f, s->irq_state[i].pending);
- qemu_put_byte(f, s->irq_state[i].active);
- qemu_put_byte(f, s->irq_state[i].level);
- qemu_put_byte(f, s->irq_state[i].model);
- qemu_put_byte(f, s->irq_state[i].trigger);
- }
-}
-
-static int gic_load(QEMUFile *f, void *opaque, int version_id)
-{
- gic_state *s = (gic_state *)opaque;
int i;
- int j;
-
- if (version_id != 3) {
- return -EINVAL;
- }
-
- s->enabled = qemu_get_be32(f);
- for (i = 0; i < NUM_CPU(s); i++) {
- s->cpu_enabled[i] = qemu_get_be32(f);
- for (j = 0; j < GIC_INTERNAL; j++)
- s->priority1[j][i] = qemu_get_be32(f);
- for (j = 0; j < s->num_irq; j++)
- s->last_active[j][i] = qemu_get_be32(f);
- s->priority_mask[i] = qemu_get_be32(f);
- s->running_irq[i] = qemu_get_be32(f);
- s->running_priority[i] = qemu_get_be32(f);
- s->current_pending[i] = qemu_get_be32(f);
- }
- for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
- s->priority2[i] = qemu_get_be32(f);
- }
- for (i = 0; i < s->num_irq; i++) {
- s->irq_target[i] = qemu_get_be32(f);
- s->irq_state[i].enabled = qemu_get_byte(f);
- s->irq_state[i].pending = qemu_get_byte(f);
- s->irq_state[i].active = qemu_get_byte(f);
- s->irq_state[i].level = qemu_get_byte(f);
- s->irq_state[i].model = qemu_get_byte(f);
- s->irq_state[i].trigger = qemu_get_byte(f);
- }
-
- return 0;
-}
-
-static void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
-{
- int i;
-
- if (s->num_cpu > NCPU) {
- hw_error("requested %u CPUs exceeds GIC maximum %d\n",
- s->num_cpu, NCPU);
- }
- s->num_irq = num_irq + GIC_BASE_IRQ;
- if (s->num_irq > GIC_MAXIRQ) {
- hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
- num_irq, GIC_MAXIRQ);
- }
- /* ITLinesNumber is represented as (N / 32) - 1 (see
- * gic_dist_readb) so this is an implementation imposed
- * restriction, not an architectural one:
- */
- if (s->num_irq < 32 || (s->num_irq % 32)) {
- hw_error("%d interrupt lines unsupported: not divisible by 32\n",
- num_irq);
- }
i = s->num_irq - GIC_INTERNAL;
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
@@ -850,17 +651,17 @@ static void gic_init_irqs_and_distributor(gic_state *s,
int num_irq)
sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
}
memory_region_init_io(&s->iomem, &gic_dist_ops, s, "gic_dist", 0x1000);
-
- register_savevm(NULL, "arm_gic", -1, 3, gic_save, gic_load, s);
}
-#ifndef NVIC
-
static int arm_gic_init(SysBusDevice *dev)
{
/* Device instance init function for the GIC sysbus device */
int i;
gic_state *s = FROM_SYSBUS(gic_state, dev);
+ ARMGICClass *agc = ARM_GIC_GET_CLASS(s);
+
+ agc->parent_init(dev);
+
gic_init_irqs_and_distributor(s, s->num_irq);
/* Memory regions for the CPU interfaces (NVIC doesn't have these):
@@ -878,7 +679,6 @@ static int arm_gic_init(SysBusDevice *dev)
memory_region_init_io(&s->cpuiomem[i+1], &gic_cpu_ops, &s->backref[i],
"gic_cpu", 0x100);
}
-
/* Distributor */
sysbus_init_mmio(dev, &s->iomem);
/* cpu interfaces (one for "current cpu" plus one per cpu) */
@@ -888,30 +688,19 @@ static int arm_gic_init(SysBusDevice *dev)
return 0;
}
-static Property arm_gic_properties[] = {
- DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
- DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
- /* Revision can be 1 or 2 for GIC architecture specification
- * versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
- * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
- */
- DEFINE_PROP_UINT32("revision", gic_state, revision, 1),
- DEFINE_PROP_END_OF_LIST(),
-};
-
static void arm_gic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
+ ARMGICClass *agc = ARM_GIC_CLASS(klass);
+ agc->parent_init = sbc->init;
sbc->init = arm_gic_init;
- dc->props = arm_gic_properties;
- dc->reset = gic_reset;
dc->no_user = 1;
}
static TypeInfo arm_gic_info = {
- .name = "arm_gic",
- .parent = TYPE_SYS_BUS_DEVICE,
+ .name = TYPE_ARM_GIC,
+ .parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(gic_state),
.class_init = arm_gic_class_init,
};
@@ -922,5 +711,3 @@ static void arm_gic_register_types(void)
}
type_init(arm_gic_register_types)
-
-#endif
diff --git a/hw/arm_gic_common.c b/hw/arm_gic_common.c
new file mode 100644
index 0000000..360e782
--- /dev/null
+++ b/hw/arm_gic_common.c
@@ -0,0 +1,184 @@
+/*
+ * ARM GIC support - common bits of emulated and KVM kernel model
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "arm_gic_internal.h"
+
+static void gic_save(QEMUFile *f, void *opaque)
+{
+ gic_state *s = (gic_state *)opaque;
+ int i;
+ int j;
+
+ qemu_put_be32(f, s->enabled);
+ for (i = 0; i < s->num_cpu; i++) {
+ qemu_put_be32(f, s->cpu_enabled[i]);
+ for (j = 0; j < GIC_INTERNAL; j++) {
+ qemu_put_be32(f, s->priority1[j][i]);
+ }
+ for (j = 0; j < s->num_irq; j++) {
+ qemu_put_be32(f, s->last_active[j][i]);
+ }
+ qemu_put_be32(f, s->priority_mask[i]);
+ qemu_put_be32(f, s->running_irq[i]);
+ qemu_put_be32(f, s->running_priority[i]);
+ qemu_put_be32(f, s->current_pending[i]);
+ }
+ for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
+ qemu_put_be32(f, s->priority2[i]);
+ }
+ for (i = 0; i < s->num_irq; i++) {
+ qemu_put_be32(f, s->irq_target[i]);
+ qemu_put_byte(f, s->irq_state[i].enabled);
+ qemu_put_byte(f, s->irq_state[i].pending);
+ qemu_put_byte(f, s->irq_state[i].active);
+ qemu_put_byte(f, s->irq_state[i].level);
+ qemu_put_byte(f, s->irq_state[i].model);
+ qemu_put_byte(f, s->irq_state[i].trigger);
+ }
+}
+
+static int gic_load(QEMUFile *f, void *opaque, int version_id)
+{
+ gic_state *s = (gic_state *)opaque;
+ int i;
+ int j;
+
+ if (version_id != 3) {
+ return -EINVAL;
+ }
+
+ s->enabled = qemu_get_be32(f);
+ for (i = 0; i < s->num_cpu; i++) {
+ s->cpu_enabled[i] = qemu_get_be32(f);
+ for (j = 0; j < GIC_INTERNAL; j++) {
+ s->priority1[j][i] = qemu_get_be32(f);
+ }
+ for (j = 0; j < s->num_irq; j++) {
+ s->last_active[j][i] = qemu_get_be32(f);
+ }
+ s->priority_mask[i] = qemu_get_be32(f);
+ s->running_irq[i] = qemu_get_be32(f);
+ s->running_priority[i] = qemu_get_be32(f);
+ s->current_pending[i] = qemu_get_be32(f);
+ }
+ for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
+ s->priority2[i] = qemu_get_be32(f);
+ }
+ for (i = 0; i < s->num_irq; i++) {
+ s->irq_target[i] = qemu_get_be32(f);
+ s->irq_state[i].enabled = qemu_get_byte(f);
+ s->irq_state[i].pending = qemu_get_byte(f);
+ s->irq_state[i].active = qemu_get_byte(f);
+ s->irq_state[i].level = qemu_get_byte(f);
+ s->irq_state[i].model = qemu_get_byte(f);
+ s->irq_state[i].trigger = qemu_get_byte(f);
+ }
+
+ return 0;
+}
+
+static int arm_gic_common_init(SysBusDevice *dev)
+{
+ gic_state *s = FROM_SYSBUS(gic_state, dev);
+ int num_irq = s->num_irq;
+
+ if (s->num_cpu > NCPU) {
+ hw_error("requested %u CPUs exceeds GIC maximum %d\n",
+ s->num_cpu, NCPU);
+ }
+ s->num_irq += GIC_BASE_IRQ;
+ if (s->num_irq > GIC_MAXIRQ) {
+ hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
+ num_irq, GIC_MAXIRQ);
+ }
+ /* ITLinesNumber is represented as (N / 32) - 1 (see
+ * gic_dist_readb) so this is an implementation imposed
+ * restriction, not an architectural one:
+ */
+ if (s->num_irq < 32 || (s->num_irq % 32)) {
+ hw_error("%d interrupt lines unsupported: not divisible by 32\n",
+ num_irq);
+ }
+
+ register_savevm(NULL, "arm_gic", -1, 3, gic_save, gic_load, s);
+ return 0;
+}
+
+static void arm_gic_common_reset(DeviceState *dev)
+{
+ gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
+ int i;
+ memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
+ for (i = 0 ; i < s->num_cpu; i++) {
+ s->priority_mask[i] = 0xf0;
+ s->current_pending[i] = 1023;
+ s->running_irq[i] = 1023;
+ s->running_priority[i] = 0x100;
+ s->cpu_enabled[i] = 0;
+ }
+ for (i = 0; i < 16; i++) {
+ GIC_SET_ENABLED(i, ALL_CPU_MASK);
+ GIC_SET_TRIGGER(i);
+ }
+ if (s->num_cpu == 1) {
+ /* For uniprocessor GICs all interrupts always target the sole CPU */
+ for (i = 0; i < GIC_MAXIRQ; i++) {
+ s->irq_target[i] = 1;
+ }
+ }
+ s->enabled = 0;
+}
+
+static Property arm_gic_common_properties[] = {
+ DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
+ DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
+ /* Revision can be 1 or 2 for GIC architecture specification
+ * versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
+ * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
+ */
+ DEFINE_PROP_UINT32("revision", gic_state, revision, 1),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void arm_gic_common_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sc = SYS_BUS_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ dc->reset = arm_gic_common_reset;
+ dc->props = arm_gic_common_properties;
+ dc->no_user = 1;
+ sc->init = arm_gic_common_init;
+}
+
+static TypeInfo arm_gic_common_type = {
+ .name = TYPE_ARM_GIC_COMMON,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(gic_state),
+ .class_size = sizeof(ARMGICCommonClass),
+ .class_init = arm_gic_common_class_init,
+ .abstract = true,
+};
+
+static void register_types(void)
+{
+ type_register_static(&arm_gic_common_type);
+}
+
+type_init(register_types)
diff --git a/hw/arm_gic_internal.h b/hw/arm_gic_internal.h
new file mode 100644
index 0000000..db4fad5
--- /dev/null
+++ b/hw/arm_gic_internal.h
@@ -0,0 +1,136 @@
+/*
+ * ARM GIC support - internal interfaces
+ *
+ * Copyright (c) 2012 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_ARM_GIC_INTERNAL_H
+#define QEMU_ARM_GIC_INTERNAL_H
+
+#include "sysbus.h"
+
+/* Maximum number of possible interrupts, determined by the GIC architecture */
+#define GIC_MAXIRQ 1020
+/* First 32 are private to each CPU (SGIs and PPIs). */
+#define GIC_INTERNAL 32
+/* Maximum number of possible CPU interfaces, determined by GIC architecture */
+#define NCPU 8
+
+#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
+
+/* The NVIC has 16 internal vectors. However these are not exposed
+ through the normal GIC interface. */
+#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
+
+#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
+#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
+#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
+#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
+#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
+#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
+#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
+#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
+#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
+#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
+#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
+#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
+#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
+#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
+#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
+#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
+#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
+#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
+#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
+ s->priority1[irq][cpu] : \
+ s->priority2[(irq) - GIC_INTERNAL])
+#define GIC_TARGET(irq) s->irq_target[irq]
+
+typedef struct gic_irq_state {
+ /* The enable bits are only banked for per-cpu interrupts. */
+ unsigned enabled:NCPU;
+ unsigned pending:NCPU;
+ unsigned active:NCPU;
+ unsigned level:NCPU;
+ unsigned model:1; /* 0 = N:N, 1 = 1:N */
+ unsigned trigger:1; /* nonzero = edge triggered. */
+} gic_irq_state;
+
+typedef struct gic_state {
+ SysBusDevice busdev;
+ qemu_irq parent_irq[NCPU];
+ int enabled;
+ int cpu_enabled[NCPU];
+
+ gic_irq_state irq_state[GIC_MAXIRQ];
+ int irq_target[GIC_MAXIRQ];
+ int priority1[GIC_INTERNAL][NCPU];
+ int priority2[GIC_MAXIRQ - GIC_INTERNAL];
+ int last_active[GIC_MAXIRQ][NCPU];
+
+ int priority_mask[NCPU];
+ int running_irq[NCPU];
+ int running_priority[NCPU];
+ int current_pending[NCPU];
+
+ uint32_t num_cpu;
+
+ MemoryRegion iomem; /* Distributor */
+ /* This is just so we can have an opaque pointer which identifies
+ * both this GIC and which CPU interface we should be accessing.
+ */
+ struct gic_state *backref[NCPU];
+ MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
+ uint32_t num_irq;
+ uint32_t revision;
+} gic_state;
+
+/* The special cases for the revision property: */
+#define REV_11MPCORE 0
+#define REV_NVIC 0xffffffff
+
+void gic_set_pending_private(gic_state *s, int cpu, int irq);
+uint32_t gic_acknowledge_irq(gic_state *s, int cpu);
+void gic_complete_irq(gic_state *s, int cpu, int irq);
+void gic_update(gic_state *s);
+void gic_init_irqs_and_distributor(gic_state *s, int num_irq);
+
+#define TYPE_ARM_GIC_COMMON "arm_gic_common"
+#define ARM_GIC_COMMON(obj) \
+ OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICCommonClass, (klass), TYPE_ARM_GIC_COMMON)
+#define ARM_GIC_COMMON_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICCommonClass, (obj), TYPE_ARM_GIC_COMMON)
+
+typedef struct ARMGICCommonClass {
+ SysBusDeviceClass parent_class;
+} ARMGICCommonClass;
+
+#define TYPE_ARM_GIC "arm_gic"
+#define ARM_GIC(obj) \
+ OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC)
+#define ARM_GIC_CLASS(klass) \
+ OBJECT_CLASS_CHECK(ARMGICClass, (klass), TYPE_ARM_GIC)
+#define ARM_GIC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(ARMGICClass, (obj), TYPE_ARM_GIC)
+
+typedef struct ARMGICClass {
+ ARMGICCommonClass parent_class;
+ int (*parent_init)(SysBusDevice *dev);
+} ARMGICClass;
+
+#endif /* !QEMU_ARM_GIC_INTERNAL_H */
diff --git a/hw/armv7m_nvic.c b/hw/armv7m_nvic.c
index 031a7fd..4867c1d 100644
--- a/hw/armv7m_nvic.c
+++ b/hw/armv7m_nvic.c
@@ -14,13 +14,7 @@
#include "qemu-timer.h"
#include "arm-misc.h"
#include "exec-memory.h"
-
-#define NVIC 1
-
-static uint32_t nvic_readl(void *opaque, uint32_t offset);
-static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);
-
-#include "arm_gic.c"
+#include "arm_gic_internal.h"
typedef struct {
gic_state gic;
@@ -36,6 +30,28 @@ typedef struct {
uint32_t num_irq;
} nvic_state;
+#define TYPE_NVIC "armv7m_nvic"
+/**
+ * NVICClass:
+ * @parent_reset: the parent class' reset handler.
+ *
+ * A model of the v7M NVIC and System Controller
+ */
+typedef struct NVICClass {
+ /*< private >*/
+ ARMGICClass parent_class;
+ /*< public >*/
+ int (*parent_init)(SysBusDevice *dev);
+ void (*parent_reset)(DeviceState *dev);
+} NVICClass;
+
+#define NVIC_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NVICClass, (klass), TYPE_NVIC)
+#define NVIC_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NVICClass, (obj), TYPE_NVIC)
+#define NVIC(obj) \
+ OBJECT_CHECK(nvic_state, (obj), TYPE_NVIC)
+
static const uint8_t nvic_id[] = {
0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1
};
@@ -429,8 +445,9 @@ static const VMStateDescription vmstate_nvic = {
static void armv7m_nvic_reset(DeviceState *dev)
{
- nvic_state *s = FROM_SYSBUSGIC(nvic_state, sysbus_from_qdev(dev));
- gic_reset(&s->gic.busdev.qdev);
+ nvic_state *s = NVIC(dev);
+ NVICClass *nc = NVIC_GET_CLASS(s);
+ nc->parent_reset(dev);
/* Common GIC reset resets to disabled; the NVIC doesn't have
* per-CPU interfaces so mark our non-existent CPU interface
* as enabled by default.
@@ -443,12 +460,15 @@ static void armv7m_nvic_reset(DeviceState *dev)
static int armv7m_nvic_init(SysBusDevice *dev)
{
- nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
+ nvic_state *s = NVIC(dev);
+ NVICClass *nc = NVIC_GET_CLASS(s);
/* The NVIC always has only one CPU */
s->gic.num_cpu = 1;
/* Tell the common code we're an NVIC */
s->gic.revision = 0xffffffff;
+ s->gic.num_irq = s->num_irq;
+ nc->parent_init(dev);
gic_init_irqs_and_distributor(&s->gic, s->num_irq);
/* The NVIC and system controller register area looks like this:
* 0..0xff : system control registers, including systick
@@ -489,9 +509,12 @@ static Property armv7m_nvic_properties[] = {
static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
{
+ NVICClass *nc = NVIC_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+ nc->parent_reset = dc->reset;
+ nc->parent_init = sdc->init;
sdc->init = armv7m_nvic_init;
dc->vmsd = &vmstate_nvic;
dc->reset = armv7m_nvic_reset;
@@ -499,10 +522,11 @@ static void armv7m_nvic_class_init(ObjectClass *klass,
void *data)
}
static TypeInfo armv7m_nvic_info = {
- .name = "armv7m_nvic",
- .parent = TYPE_SYS_BUS_DEVICE,
+ .name = TYPE_NVIC,
+ .parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(nvic_state),
.class_init = armv7m_nvic_class_init,
+ .class_size = sizeof(NVICClass),
};
static void armv7m_nvic_register_types(void)
--
1.7.1
- [Qemu-devel] [PATCH 10/16] hw/arm_gic: Move CPU interface memory region setup into arm_gic_init, (continued)
- [Qemu-devel] [PATCH 10/16] hw/arm_gic: Move CPU interface memory region setup into arm_gic_init, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 12/16] hw/omap.h: Drop broken MEM_VERBOSE tracing, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 15/16] cadence_ttc: changed master clock frequency, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 08/16] hw/arm_gic: Make CPU target registers RAZ/WI on uniprocessor, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 07/16] hw/arm_gic: Add qdev property for GIC revision, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 02/16] arm_boot: Fix typos in comment, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 13/16] hw/a9mpcore: Fix compilation failure if physaddrs are 64 bit, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 06/16] hw/armv7m_nvic: Use MemoryRegions for NVIC specific registers, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 05/16] hw/arm_gic: Move NVIC specific reset to armv7m_nvic_reset, Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 01/16] ARM: Exynos4210 IRQ: Introduce new IRQ gate functionality., Peter Maydell, 2012/06/19
- [Qemu-devel] [PATCH 11/16] hw/armv7m_nvic: Make the NVIC a freestanding class,
Peter Maydell <=
- [Qemu-devel] [PATCH 03/16] hw/arm_gic: Remove NVIC ifdefs from gic_state struct, Peter Maydell, 2012/06/19
- Re: [Qemu-devel] [PULL 00/16] arm-devs queue, Blue Swirl, 2012/06/24