Re: [Qemu-devel] First shot at adding IPMI to qemu

[Paolo Bonzini]

Il 09/07/2012 21:17, address@hidden ha scritto:
> I had asked about getting an IPMI device into qemu and received some
> interest, and it's useful to me, so I've done some work to add it.
> The following patch set has a set of patches to add an IPMI KCS
> device, and IPMI BT device, a built-in BMC (IPMI management controller),
> and a way to attach an external BMC through a chardev.
> 
> There was some discussion on whether to make the BMC internal or
> external, but I went ahead and added both.  The internal one is
> fairly basic and not extensible, at least without adding code.
> I've modified the OpenIPMI library simulator to work with the
> external interface to allow it to receive connections from the
> qemu external simulator with a fairly basic protocol.
> 
> I've also added the ability for the OpenIPMI library to manage
> a VM to power it on, power it off, reset it, and handle an IPMI
> watchdog timer.  So it looks quite like a real system.  Instructions
> for using it are in the OpenIPMI release candidate I uploaded to
> https://sourceforge.net/projects/openipmi
> 
> Since IPMI can advertise its presence via SMBIOS, I added a
> way for a driver to add an SMBIOS entry.  I also added a way
> to query a free interrupt from the ISA bus, since the interrupt
> is in the SMBIOS entry and nobody really cares which one is used.

I provided some feedback in the individual patches, it shouldn't be a
lot of work compared to what you have done already!

It would be great if you could add a basic testcase using qtest, even if
only for the internal interface, to ensure it doesn't bitrot.

Paolo