Re: [Qemu-devel] [Qemu-ppc][PATCH v8 1/2] Add USB option in machine options

[Li Zhang]

On Wed, Aug 15, 2012 at 2:08 AM, Alexander Graf <address@hidden> wrote:
>
>
> On 14.08.2012, at 19:49, Li Zhang <address@hidden> wrote:
>
>> When -usb option is used, global varible usb_enabled is set.
>> And all the plafrom will create one USB controller according
>> to this variable. In fact, global varibles make code hard
>> to read.
>>
>> So this patch is to remove global variable usb_enabled and
>> add USB option in machine options. All the plaforms will get
>> USB option value from machine options.
>>
>> USB option of machine options will be set either by:
>>  * -usb
>>  * -machine type=pseries,usb=on
>>
>> Both these ways can work now. They both set USB option in
>> machine options. In the future, the first way will be removed.
>>
>> Signed-off-by: Li Zhang <address@hidden>
>> ---
>> v7->v8 :
>>  * Declare usb_enabled() and set_usb_option() in sysemu.h
>>  * Separate USB enablement on sPAPR platform.
>>
>> hw/nseries.c      |    2 +-
>> hw/pc_piix.c      |    2 +-
>> hw/ppc_newworld.c |    4 ++--
>> hw/ppc_oldworld.c |    2 +-
>> hw/ppc_prep.c     |    2 +-
>> hw/pxa2xx.c       |    4 ++--
>> hw/realview.c     |    2 +-
>> hw/versatilepb.c  |    2 +-
>> qemu-config.c     |    4 ++++
>> sysemu.h          |    5 ++++-
>> vl.c              |   34 ++++++++++++++++++++++++++++------
>> 11 files changed, 46 insertions(+), 17 deletions(-)
>>
>> diff --git a/hw/nseries.c b/hw/nseries.c
>> index 4df2670..c67e95a 100644
>> --- a/hw/nseries.c
>> +++ b/hw/nseries.c
>> @@ -1322,7 +1322,7 @@ static void n8x0_init(ram_addr_t ram_size, const char 
>> *boot_device,
>>     n8x0_dss_setup(s);
>>     n8x0_cbus_setup(s);
>>     n8x0_uart_setup(s);
>> -    if (usb_enabled)
>> +    if (usb_enabled(false))
>>         n8x0_usb_setup(s);
>>
>>     if (kernel_filename) {
>> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
>> index 0c0096f..b662192 100644
>> --- a/hw/pc_piix.c
>> +++ b/hw/pc_piix.c
>> @@ -267,7 +267,7 @@ static void pc_init1(MemoryRegion *system_memory,
>>     pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
>>                  floppy, idebus[0], idebus[1], rtc_state);
>>
>> -    if (pci_enabled && usb_enabled) {
>> +    if (pci_enabled && usb_enabled(false)) {
>>         pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
>>     }
>>
>> diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
>> index 4e2a6e6..fe92491 100644
>> --- a/hw/ppc_newworld.c
>> +++ b/hw/ppc_newworld.c
>> @@ -350,7 +350,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>
>>     /* cuda also initialize ADB */
>>     if (machine_arch == ARCH_MAC99_U3) {
>> -        usb_enabled = 1;
>> +         set_usb_option(true);
>
> Semantically, this one sets the default usb_enabled to true. Just make the 
> usb_enabled() call get its default value as true when arch == mac99_u3.
>
>>     }
>>     cuda_init(&cuda_mem, pic[0x19]);
>>
>> @@ -360,7 +360,7 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>     macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem,
>>                dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
>>
>> -    if (usb_enabled) {
>> +    if (usb_enabled(true)) {
>
> Why true?
Oh, we had some discussion about it before on sPAPR.
So I set the default as true on all ppc platform.
If this is a problem, I will set it as false.

>
>>         pci_create_simple(pci_bus, -1, "pci-ohci");
>>     }
>>
>> diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
>> index f2c6908..a62b3d8 100644
>> --- a/hw/ppc_oldworld.c
>> +++ b/hw/ppc_oldworld.c
>> @@ -286,7 +286,7 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>>     macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
>>                dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
>>
>> -    if (usb_enabled) {
>> +    if (usb_enabled(true)) {
>
> Why true? Same for all occurencex of true as default below. Today, we always 
> default to false, no?
I considered sPAPR as true before.
It only disable USB by passing "usb=off".
I will set other platforms  as true.

For sPAPR, I may need to consider when VGA is enabled to set USB as true
according to Ben's suggestion. :)

>
>>         pci_create_simple(pci_bus, -1, "pci-ohci");
>>     }
>>
>> diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
>> index be2b268..84ead22 100644
>> --- a/hw/ppc_prep.c
>> +++ b/hw/ppc_prep.c
>> @@ -661,7 +661,7 @@ static void ppc_prep_init (ram_addr_t ram_size,
>>     memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
>> #endif
>>
>> -    if (usb_enabled) {
>> +    if (usb_enabled(true)) {
>>         pci_create_simple(pci_bus, -1, "pci-ohci");
>>     }
>>
>> diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
>> index d5f1420..28eb92e 100644
>> --- a/hw/pxa2xx.c
>> +++ b/hw/pxa2xx.c
>> @@ -2108,7 +2108,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
>>         s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>     }
>>
>> -    if (usb_enabled) {
>> +    if (usb_enabled(true)) {
>>         sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>                         qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>     }
>> @@ -2239,7 +2239,7 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, 
>> unsigned int sdram_size)
>>         s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>     }
>>
>> -    if (usb_enabled) {
>> +    if (usb_enabled(false)) {
>>         sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>                         qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>     }
>> diff --git a/hw/realview.c b/hw/realview.c
>> index 19db4d0..a53f327 100644
>> --- a/hw/realview.c
>> +++ b/hw/realview.c
>> @@ -227,7 +227,7 @@ static void realview_init(ram_addr_t ram_size,
>>         sysbus_connect_irq(busdev, 2, pic[50]);
>>         sysbus_connect_irq(busdev, 3, pic[51]);
>>         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
>> -        if (usb_enabled) {
>> +        if (usb_enabled(true)) {
>>             pci_create_simple(pci_bus, -1, "pci-ohci");
>>         }
>>         n = drive_get_max_bus(IF_SCSI);
>> diff --git a/hw/versatilepb.c b/hw/versatilepb.c
>> index 4fd5d9b..f76671c 100644
>> --- a/hw/versatilepb.c
>> +++ b/hw/versatilepb.c
>> @@ -247,7 +247,7 @@ static void versatile_init(ram_addr_t ram_size,
>>             pci_nic_init_nofail(nd, "rtl8139", NULL);
>>         }
>>     }
>> -    if (usb_enabled) {
>> +    if (usb_enabled(false)) {
>>         pci_create_simple(pci_bus, -1, "pci-ohci");
>>     }
>>     n = drive_get_max_bus(IF_SCSI);
>> diff --git a/qemu-config.c b/qemu-config.c
>> index 5c3296b..b86ee36 100644
>> --- a/qemu-config.c
>> +++ b/qemu-config.c
>> @@ -595,6 +595,10 @@ static QemuOptsList qemu_machine_opts = {
>>             .name = "dt_compatible",
>>             .type = QEMU_OPT_STRING,
>>             .help = "Overrides the \"compatible\" property of the dt root 
>> node",
>> +        },{
>> +            .name = "usb",
>> +            .type = QEMU_OPT_BOOL,
>> +            .help = "Set on/off to enable/disable usb",
>>         },
>>         { /* End of list */ }
>>     },
>> diff --git a/sysemu.h b/sysemu.h
>> index 4669348..3492fef 100644
>> --- a/sysemu.h
>> +++ b/sysemu.h
>> @@ -118,7 +118,6 @@ extern const char *keyboard_layout;
>> extern int win2k_install_hack;
>> extern int alt_grab;
>> extern int ctrl_grab;
>> -extern int usb_enabled;
>> extern int smp_cpus;
>> extern int max_cpus;
>> extern int cursor_hide;
>> @@ -188,4 +187,8 @@ void register_devices(void);
>> void add_boot_device_path(int32_t bootindex, DeviceState *dev,
>>                           const char *suffix);
>> char *get_boot_devices_list(uint32_t *size);
>> +
>> +bool usb_enabled(bool default_usb);
>> +void set_usb_option(bool usb_option);
>
> I don't think we need an exported helper to set the option. Machines only 
> ever want to be able to override the default.
>
>
> Alex
>
>> +
>> #endif
>> diff --git a/vl.c b/vl.c
>> index d01256a..bf51249 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -198,7 +198,6 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
>> CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
>> CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
>> int win2k_install_hack = 0;
>> -int usb_enabled = 0;
>> int singlestep = 0;
>> int smp_cpus = 1;
>> int max_cpus = 0;
>> @@ -765,6 +764,27 @@ static int bt_parse(const char *opt)
>>     return 1;
>> }
>>
>> +/*********Qemu USB setting******/
>> +bool usb_enabled(bool default_usb)
>> +{
>> +    QemuOpts *mach_opts;
>> +    mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> +    if (mach_opts) {
>> +        return qemu_opt_get_bool(mach_opts, "usb", default_usb);
>> +    }
>> +    return default_usb;
>> +}
>> +
>> +void set_usb_option(bool usb_option)
>> +{
>> +    QemuOpts *mach_opts;
>> +    mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>> +    if (mach_opts) {
>> +        qemu_opt_set_bool(mach_opts, "usb", usb_option);
>> +    }
>> +}
>> +
>> +
>> /***********************************************************/
>> /* QEMU Block devices */
>>
>> @@ -1053,8 +1073,9 @@ static int usb_device_add(const char *devname)
>>     const char *p;
>>     USBDevice *dev = NULL;
>>
>> -    if (!usb_enabled)
>> +    if (!usb_enabled(false)) {
>>         return -1;
>> +    }
>>
>>     /* drivers with .usbdevice_name entry in USBDeviceInfo */
>>     dev = usbdevice_create(devname);
>> @@ -1090,8 +1111,9 @@ static int usb_device_del(const char *devname)
>>     if (strstart(devname, "host:", &p))
>>         return usb_host_device_close(p);
>>
>> -    if (!usb_enabled)
>> +    if (!usb_enabled(false)) {
>>         return -1;
>> +    }
>>
>>     p = strchr(devname, '.');
>>     if (!p)
>> @@ -3027,10 +3049,10 @@ int main(int argc, char **argv, char **envp)
>>                 }
>>                 break;
>>             case QEMU_OPTION_usb:
>> -                usb_enabled = 1;
>> +                set_usb_option(true);
>>                 break;
>>             case QEMU_OPTION_usbdevice:
>> -                usb_enabled = 1;
>> +                set_usb_option(true);
>>                 add_device_config(DEV_USB, optarg);
>>                 break;
>>             case QEMU_OPTION_device:
>> @@ -3578,7 +3600,7 @@ int main(int argc, char **argv, char **envp)
>>     current_machine = machine;
>>
>>     /* init USB devices */
>> -    if (usb_enabled) {
>> +    if (usb_enabled(false)) {
>>         if (foreach_device_config(DEV_USB, usb_parse) < 0)
>>             exit(1);
>>     }
>> --
>> 1.7.7.6
>>



-- 

Best Regards
-Li