qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] ehci: fix Interrupt Threshold Control implement


From: Hans de Goede
Subject: Re: [Qemu-devel] [PATCH] ehci: fix Interrupt Threshold Control implementation
Date: Wed, 15 Aug 2012 14:57:22 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:14.0) Gecko/20120717 Thunderbird/14.0

Hi,

On 08/15/2012 02:00 PM, Gerd Hoffmann wrote:
First, not all interrupts are subject to Interrupt Threshold Control,
some of them must be delivered without delay.

Second, Interrupt Threshold Control state must be part of vmstate,
otherwise we might loose IRQs on migration.

Looks good except for 2 things:

1) For some reason it does not fix my redirected usb mass storage device not
seen until lsusb issue, I will investigate this further
2) Does not apply cleanly to master, there is no vmstate_ehci.pre_seave
in master

Regards,

Hans




Signed-off-by: Gerd Hoffmann <address@hidden>
---
  hw/usb/hcd-ehci.c |   12 ++++++++++--
  1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 2eeef29..b78bf44 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -576,7 +576,12 @@ static inline void ehci_update_irq(EHCIState *s)
  /* flag interrupt condition */
  static inline void ehci_raise_irq(EHCIState *s, int intr)
  {
-    s->usbsts_pending |= intr;
+    if (intr & (USBSTS_PCD | USBSTS_FLR | USBSTS_HSE)) {
+        s->usbsts |= intr;
+        ehci_update_irq(s);
+    } else {
+        s->usbsts_pending |= intr;
+    }
  }

  /*
@@ -2480,7 +2485,8 @@ static int usb_ehci_post_load(void *opaque, int 
version_id)

  static const VMStateDescription vmstate_ehci = {
      .name        = "ehci",
-    .version_id  = 1,
+    .version_id  = 2,
+    .minimum_version_id  = 1,
      .pre_save    = usb_ehci_pre_save,
      .post_load   = usb_ehci_post_load,
      .fields      = (VMStateField[]) {
@@ -2488,6 +2494,8 @@ static const VMStateDescription vmstate_ehci = {
          /* mmio registers */
          VMSTATE_UINT32(usbcmd, EHCIState),
          VMSTATE_UINT32(usbsts, EHCIState),
+        VMSTATE_UINT32_V(usbsts_pending, EHCIState, 2),
+        VMSTATE_UINT32_V(usbsts_frindex, EHCIState, 2),
          VMSTATE_UINT32(usbintr, EHCIState),
          VMSTATE_UINT32(frindex, EHCIState),
          VMSTATE_UINT32(ctrldssegment, EHCIState),




reply via email to

[Prev in Thread] Current Thread [Next in Thread]