qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC v2] ahci: Add support for migration


From: Jason Baron
Subject: Re: [Qemu-devel] [RFC v2] ahci: Add support for migration
Date: Fri, 24 Aug 2012 12:28:22 -0400
User-agent: Mutt/1.5.20 (2009-12-10)

On Thu, Aug 09, 2012 at 10:49:23AM -0400, Jason Baron wrote:
> On Thu, Aug 09, 2012 at 02:59:54PM +0200, Andreas Färber wrote:
> > Define generic VMState for AHCI and reuse it together with PCI for ICH
> > and on its own for the SysBus version.
> > 
> > Note: ICH9 initializes AHCI with 6 ports, which dynamically allocates
> > 6 AHCIDevice structs. Thus we change the ports field type to uint32_t
> > for compatibility with VMState macros.
> > 
> > Signed-off-by: Andreas Färber <address@hidden>
> > Cc: Alexander Graf <address@hidden>
> > Cc: Jason Baron <address@hidden>
> > Cc: Kevin Wolf <address@hidden>
> > Cc: Juan Quintela <address@hidden>
> > Cc: Igor Mitsyanko <address@hidden>
> > ---
> >  hw/ide/ahci.c |   46 +++++++++++++++++++++++++++++++++++++++++++++-
> >  hw/ide/ahci.h |   12 +++++++++++-
> >  hw/ide/ich.c  |   11 ++++++++---
> >  3 files changed, 64 insertions(+), 5 deletions(-)
> > 
> 
> Thanks for doing this. My migration on q35 completes, but the disk is
> not accessible. Didn't test piix. Console output below.
> 

Hi Andreas,

The below patch (ont top of you patch) makes ahci migration work for me, very
lightly tested at this point. 

Thanks,

-Jason


diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 06c236f..61d1cdb 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1225,15 +1225,33 @@ static const VMStateDescription vmstate_ahci_device = {
         VMSTATE_UINT32(port_regs.scr_err, AHCIDevice),
         VMSTATE_UINT32(port_regs.scr_act, AHCIDevice),
         VMSTATE_UINT32(port_regs.cmd_issue, AHCIDevice),
+        VMSTATE_INT32(port_no, AHCIDevice),
         VMSTATE_END_OF_LIST()
     },
 };
 
+static int ahci_state_post_load(void *opaque, int version_id)
+{
+    int i;
+    AHCIState *s = opaque;
+        
+    for (i = 0; i < s->ports; i++) {
+        AHCIPortRegs *pr = &s->dev[i].port_regs;
+        map_page(&s->dev[i].lst,
+                 ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
+        map_page(&s->dev[i].res_fis,
+                 ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
+    }
+    
+    return 0;
+}
+
 const VMStateDescription vmstate_ahci = {
     .name = "ahci",
     .version_id = 1,
+    .post_load = ahci_state_post_load,
     .fields = (VMStateField []) {
-        VMSTATE_STRUCT_VARRAY_UINT32(dev, AHCIState, ports, 0,
+        VMSTATE_STRUCT_VARRAY_POINTER_UINT32(dev, AHCIState, ports, 0,
                                      vmstate_ahci_device, AHCIDevice),
         VMSTATE_UINT32(control_regs.cap, AHCIState),
         VMSTATE_UINT32(control_regs.ghc, AHCIState),
diff --git a/vmstate.h b/vmstate.h
index 5bd2b76..2a5cf51 100644
--- a/vmstate.h
+++ b/vmstate.h
@@ -349,6 +349,16 @@ extern const VMStateInfo vmstate_info_unused_buffer;
     .offset     = offsetof(_state, _field),                          \
 }
 
+#define VMSTATE_STRUCT_VARRAY_POINTER_UINT32(_field, _state, _field_num, 
_version, _vmsd, _type) { \
+    .name       = (stringify(_field)),                               \
+    .num_offset = vmstate_offset_value(_state, _field_num, uint32_t), \
+    .version_id = (_version),                                        \
+    .vmsd       = &(_vmsd),                                          \
+    .size       = sizeof(_type),                                     \
+    .flags      = VMS_POINTER | VMS_STRUCT | VMS_VARRAY_UINT32,      \
+    .offset     = offsetof(_state, _field),                          \
+}
+
 #define VMSTATE_STATIC_BUFFER(_field, _state, _version, _test, _start, _size) 
{ \
     .name         = (stringify(_field)),                             \
     .version_id   = (_version),                                      \



reply via email to

[Prev in Thread] Current Thread [Next in Thread]