qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC v2 PATCH 2/6] block: add live block commit functionali


From: Jeff Cody
Subject: [Qemu-devel] [RFC v2 PATCH 2/6] block: add live block commit functionality
Date: Thu, 30 Aug 2012 14:47:40 -0400

This adds the live commit coroutine.  This iteration focuses on the
commit only below the active layer, and not the active layer itself.

The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base.  At the end, intermediate images are deleted, and the
chain stitched together.  Images are restored to their original open
flags upon completion.

Signed-off-by: Jeff Cody <address@hidden>
---
 block/Makefile.objs |   1 +
 block/commit.c      | 202 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 block_int.h         |  19 +++++
 trace-events        |   2 +
 4 files changed, 224 insertions(+)
 create mode 100644 block/commit.c

diff --git a/block/Makefile.objs b/block/Makefile.objs
index b5754d3..4a136b8 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -4,6 +4,7 @@ block-obj-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o 
qed-cluster.o
 block-obj-y += qed-check.o
 block-obj-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
 block-obj-y += stream.o
+block-obj-y += commit.o
 block-obj-$(CONFIG_WIN32) += raw-win32.o
 block-obj-$(CONFIG_POSIX) += raw-posix.o
 block-obj-$(CONFIG_LIBISCSI) += iscsi.o
diff --git a/block/commit.c b/block/commit.c
new file mode 100644
index 0000000..bd3d882
--- /dev/null
+++ b/block/commit.c
@@ -0,0 +1,202 @@
+/*
+ * Live block commit
+ *
+ * Copyright Red Hat, Inc. 2012
+ *
+ * Authors:
+ *  Jeff Cody   <address@hidden>
+ *  Based on stream.c by Stefan Hajnoczi
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "trace.h"
+#include "block_int.h"
+#include "qemu/ratelimit.h"
+
+enum {
+    /*
+     * Size of data buffer for populating the image file.  This should be large
+     * enough to process multiple clusters in a single call, so that populating
+     * contiguous regions of the image is efficient.
+     */
+    COMMIT_BUFFER_SIZE = 512 * 1024, /* in bytes */
+};
+
+#define SLICE_TIME 100000000ULL /* ns */
+
+typedef struct CommitBlockJob {
+    BlockJob common;
+    RateLimit limit;
+    BlockDriverState *active;
+    BlockDriverState *top;
+    BlockDriverState *base;
+    BlockErrorAction on_error;
+    int base_flags;
+    int top_flags;
+} CommitBlockJob;
+
+static int coroutine_fn commit_populate(BlockDriverState *bs,
+                                        BlockDriverState *base,
+                                        int64_t sector_num, int nb_sectors,
+                                        void *buf)
+{
+    if (bdrv_read(bs, sector_num, buf, nb_sectors)) {
+        return -EIO;
+    }
+    if (bdrv_write(base, sector_num, buf, nb_sectors)) {
+        return -EIO;
+    }
+    return 0;
+}
+
+static void coroutine_fn commit_run(void *opaque)
+{
+    CommitBlockJob *s = opaque;
+    BlockDriverState *active = s->active;
+    BlockDriverState *top = s->top;
+    BlockDriverState *base = s->base;
+    BlockDriverState *top_child = NULL;
+    int64_t sector_num, end;
+    int error = 0;
+    int ret = 0;
+    int n = 0;
+    void *buf;
+    int bytes_written = 0;
+
+    s->common.len = bdrv_getlength(top);
+    if (s->common.len < 0) {
+        block_job_complete(&s->common, s->common.len);
+        return;
+    }
+
+    top_child = bdrv_find_child(active, top);
+
+    end = s->common.len >> BDRV_SECTOR_BITS;
+    buf = qemu_blockalign(top, COMMIT_BUFFER_SIZE);
+
+    for (sector_num = 0; sector_num < end; sector_num += n) {
+        uint64_t delay_ns = 0;
+        bool copy;
+
+wait:
+        /* Note that even when no rate limit is applied we need to yield
+         * with no pending I/O here so that qemu_aio_flush() returns.
+         */
+        block_job_sleep_ns(&s->common, rt_clock, delay_ns);
+        if (block_job_is_cancelled(&s->common)) {
+            break;
+        }
+        /* Copy if allocated above the base */
+        ret = bdrv_co_is_allocated_above(top, base, sector_num,
+                                         COMMIT_BUFFER_SIZE / BDRV_SECTOR_SIZE,
+                                         &n);
+        copy = (ret == 1);
+        trace_commit_one_iteration(s, sector_num, n, ret);
+        if (ret >= 0 && copy) {
+            if (s->common.speed) {
+                delay_ns = ratelimit_calculate_delay(&s->limit, n);
+                if (delay_ns > 0) {
+                    goto wait;
+                }
+            }
+            ret = commit_populate(top, base, sector_num, n, buf);
+            bytes_written += n * BDRV_SECTOR_SIZE;
+        }
+        if (ret < 0) {
+            if (s->on_error == BLOCK_ERR_STOP_ANY ||
+                s->on_error == BLOCK_ERR_STOP_ENOSPC) {
+                n = 0;
+                continue;
+            }
+            if (error == 0) {
+                error = ret;
+            }
+            if (s->on_error == BLOCK_ERR_REPORT) {
+                break;
+            }
+        }
+        ret = 0;
+
+        /* Publish progress */
+        s->common.offset += n * BDRV_SECTOR_SIZE;
+    }
+
+    if (!block_job_is_cancelled(&s->common) && sector_num == end && ret == 0) {
+        /* success */
+        if (bdrv_delete_intermediate(active, top, base)) {
+            /* something went wrong! */
+            /* TODO:add error reporting here */
+        }
+    }
+
+    /* restore base open flags here if appropriate (e.g., change the base back
+     * to r/o). These reopens do not need to be atomic, since we won't abort
+     * even on failure here */
+
+    if (s->base_flags != bdrv_get_flags(base)) {
+        bdrv_reopen(base, s->base_flags, NULL);
+    }
+    if (s->top_flags != bdrv_get_flags(top_child)) {
+        bdrv_reopen(top_child, s->top_flags, NULL);
+    }
+
+    qemu_vfree(buf);
+    block_job_complete(&s->common, ret);
+}
+
+static void commit_set_speed(BlockJob *job, int64_t speed, Error **errp)
+{
+    CommitBlockJob *s = container_of(job, CommitBlockJob, common);
+
+    if (speed < 0) {
+        error_set(errp, QERR_INVALID_PARAMETER, "speed");
+        return;
+    }
+    ratelimit_set_speed(&s->limit, speed / BDRV_SECTOR_SIZE, SLICE_TIME);
+}
+
+static BlockJobType commit_job_type = {
+    .instance_size = sizeof(CommitBlockJob),
+    .job_type      = "commit",
+    .set_speed     = commit_set_speed,
+};
+
+void commit_start(BlockDriverState *bs, BlockDriverState *base,
+                 BlockDriverState *top, int64_t speed,
+                 BlockErrorAction on_error, BlockDriverCompletionFunc *cb,
+                 void *opaque, int orig_base_flags, int orig_top_flags,
+                 Error **errp)
+{
+    CommitBlockJob *s;
+
+    if ((on_error == BLOCK_ERR_STOP_ANY ||
+         on_error == BLOCK_ERR_STOP_ENOSPC) &&
+        !bdrv_iostatus_is_enabled(bs)) {
+        error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
+        return;
+    }
+
+    s = block_job_create(&commit_job_type, bs, speed, cb, opaque, errp);
+    if (!s) {
+        return;
+    }
+
+    s->base   = base;
+    s->top    = top;
+    s->active = bs;
+
+    s->base_flags = orig_base_flags;
+    s->top_flags  = orig_top_flags;
+
+    s->on_error = on_error;
+    s->common.co = qemu_coroutine_create(commit_run);
+
+    trace_commit_start(bs, base, top, s, s->common.co, opaque,
+                       orig_base_flags, orig_top_flags);
+    qemu_coroutine_enter(s->common.co, s);
+
+    return;
+}
diff --git a/block_int.h b/block_int.h
index 7a4e226..5c936ee 100644
--- a/block_int.h
+++ b/block_int.h
@@ -469,4 +469,23 @@ void stream_start(BlockDriverState *bs, BlockDriverState 
*base,
                   BlockDriverCompletionFunc *cb,
                   void *opaque, Error **errp);
 
+/**
+ * commit_start:
+ * @bs: Top Block device
+ * @base: Block device that will be written into, and become the new top
+ * @speed: The maximum speed, in bytes per second, or 0 for unlimited.
+ * @on_error: The action to take upon error.
+ * @cb: Completion function for the job.
+ * @opaque: Opaque pointer value passed to @cb.
+ * @orig_base_flags: The original open flags for the base image
+ * @orig_top_flags: The original open flags for the top image
+ * @errp: Error object.
+ *
+ */
+void commit_start(BlockDriverState *bs, BlockDriverState *base,
+                 BlockDriverState *top, int64_t speed,
+                 BlockErrorAction on_error, BlockDriverCompletionFunc *cb,
+                 void *opaque, int orig_base_flags, int orig_top_flags,
+                 Error **errp);
+
 #endif /* BLOCK_INT_H */
diff --git a/trace-events b/trace-events
index 04b0723..9eb8f10 100644
--- a/trace-events
+++ b/trace-events
@@ -74,6 +74,8 @@ bdrv_co_do_copy_on_readv(void *bs, int64_t sector_num, int 
nb_sectors, int64_t c
 # block/stream.c
 stream_one_iteration(void *s, int64_t sector_num, int nb_sectors, int 
is_allocated) "s %p sector_num %"PRId64" nb_sectors %d is_allocated %d"
 stream_start(void *bs, void *base, void *s, void *co, void *opaque) "bs %p 
base %p s %p co %p opaque %p"
+commit_one_iteration(void *s, int64_t sector_num, int nb_sectors, int 
is_allocated) "s %p sector_num %"PRId64" nb_sectors %d is_allocated %d"
+commit_start(void *bs, void *base, void *top, void *s, void *co, void *opaque, 
int base_flags, int top_flags) "bs %p base %p top %p s %p co %p opaque %p 
base_flags %d top_flags %d"
 
 # blockdev.c
 qmp_block_job_cancel(void *job) "job %p"
-- 
1.7.11.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]