[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v7 12/14] target-mips-ase-dsp: Add MIPS DSP proc
From: |
Aurelien Jarno |
Subject: |
Re: [Qemu-devel] [PATCH v7 12/14] target-mips-ase-dsp: Add MIPS DSP processors |
Date: |
Thu, 6 Sep 2012 11:11:36 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Tue, Aug 28, 2012 at 02:36:23PM +0800, Jia Liu wrote:
> Add MIPS[32|64] ASE DSP[R1|R2] generic cpu model for test.
>
> Signed-off-by: Jia Liu <address@hidden>
> ---
> target-mips/translate_init.c | 55
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/target-mips/translate_init.c b/target-mips/translate_init.c
> index c39138f..65ba547 100644
> --- a/target-mips/translate_init.c
> +++ b/target-mips/translate_init.c
> @@ -311,6 +311,32 @@ static const mips_def_t mips_defs[] =
> .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_MT,
> .mmu_type = MMU_TYPE_R4000,
> },
> + {
> + /* A generic CPU providing MIPS32 ASE DSP Release 2 features.
> + FIXME: Eventually this should be replaced by a real CPU model. */
Is it something that could be fixed now? I guess MIPS produces core with
this instruction set.
> + .name = "mips32dspr2",
> + .CP0_PRid = 0x00019300,
> + .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
> + (MMU_TYPE_R4000 << CP0C0_MT),
> + .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
> + (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
> + (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
> + (1 << CP0C1_CA),
> + .CP0_Config2 = MIPS_CONFIG2,
> + .CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt) | (1 << CP0C3_DSPP),
> + .CP0_LLAddr_rw_bitmask = 0,
> + .CP0_LLAddr_shift = 4,
> + .SYNCI_Step = 32,
> + .CCRes = 2,
> + /* No DSP implemented. */
> + .CP0_Status_rw_bitmask = 0x3778FF1F,
> + .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
> + (1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
> + .SEGBITS = 32,
> + .PABITS = 32,
> + .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_DSPR2,
> + .mmu_type = MMU_TYPE_R4000,
> + },
> #if defined(TARGET_MIPS64)
> {
> .name = "R4000",
> @@ -484,6 +510,35 @@ static const mips_def_t mips_defs[] =
> .insn_flags = CPU_LOONGSON2F,
> .mmu_type = MMU_TYPE_R4000,
> },
> + {
> + /* A generic CPU providing MIPS64 ASE DSP Release 2 features.
> + FIXME: Eventually this should be replaced by a real CPU model. */
> + .name = "mips64dspr2",
> + /* We emulate a later version of the 20Kc, earlier ones had a broken
> + WAIT instruction. */
> + .CP0_PRid = 0x000182a0,
> + .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
> + (MMU_TYPE_R4000 << CP0C0_MT) | (1 << CP0C0_VI),
> + .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (47 << CP0C1_MMU) |
> + (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
> + (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
> + (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
> + .CP0_Config2 = MIPS_CONFIG2,
> + .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSPP),
> + .CP0_LLAddr_rw_bitmask = 0,
> + .CP0_LLAddr_shift = 0,
> + .SYNCI_Step = 32,
> + .CCRes = 1,
> + .CP0_Status_rw_bitmask = 0x37FBFFFF,
> + /* The 20Kc has F64 / L / W but doesn't use the fcr0 bits. */
> + .CP1_fcr0 = (1 << FCR0_3D) | (1 << FCR0_PS) |
> + (1 << FCR0_D) | (1 << FCR0_S) |
> + (0x82 << FCR0_PRID) | (0x0 << FCR0_REV),
> + .SEGBITS = 40,
> + .PABITS = 36,
> + .insn_flags = CPU_MIPS64R2 | ASE_DSP | ASE_DSPR2,
> + .mmu_type = MMU_TYPE_R4000,
> + },
>
> #endif
> };
> --
> 1.7.9.5
>
>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
address@hidden http://www.aurel32.net
- Re: [Qemu-devel] [PATCH v7 12/14] target-mips-ase-dsp: Add MIPS DSP processors,
Aurelien Jarno <=