[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block
From: |
Bharata B Rao |
Subject: |
Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend |
Date: |
Fri, 7 Sep 2012 20:36:43 +0530 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Thu, Sep 06, 2012 at 12:29:30PM +0200, Kevin Wolf wrote:
> Am 06.09.2012 12:18, schrieb Paolo Bonzini:
> > Il 06/09/2012 12:07, Kevin Wolf ha scritto:
> >>> The AIOCB is already invalid at the time the callback is entered, so we
> >>> could release it before the call. However, not all implementation of
> >>> AIO are ready for that and I'm not really in the mood for large scale
> >>> refactoring...
> >>
> >> But the way, what I'd really want to see in the end is to get rid of
> >> qemu_aio_flush() and replace it by .bdrv_drain() callbacks in each
> >> BlockDriver. The way we're doing it today is a layering violation.
> >
> > That's quite difficult. Completion of an I/O operation can trigger
> > another I/O operation on another block device, and so on until we go
> > back to the first device (think of a hypothetical RAID-5 device).
>
> You always have a tree of BDSes, and children should only ever trigger
> completion of I/O operations in their parents. Am I missing anything?
>
> >> Doesn't change anything about this problem, though. So the options that
> >> we have are:
> >>
> >> 1. Delay the callback using a BH. Doing this in each driver is ugly.
> >> But is there actually more than one possible callback in today's
> >> coroutine world? I only see bdrv_co_io_em_complete(), which could
> >> reenter the coroutine from a BH.
> >
> > Easy and safe, but it feels a bit like a timebomb. Also, I'm not
> > entirely sure of _why_ the bottom half works. :)
>
> Hm, safe and time bomb is contradictory in my book. :-)
>
> The bottom half work because we're not reentering the qcow2_create
> coroutine immediately, so the gluster AIO callback can complete all of
> its cleanup work without being interrupted by code that might wait on
> this particular request and create a deadlock this way.
>
> >> 2. Delay the callback by just calling it later when the cleanup has
> >> been completed and .io_flush() can return 0. You say that it's hard
> >> to implement for some drivers, except if the AIOCB are leaked until
> >> the end of functions like qcow2_create().
> >
> > ... which is what we do in posix-aio-compat.c; nobody screamed so far.
>
> True. Would be easy to fix in posix-aio-compat, though, or can a
> callback expect that the AIOCB is still valid?
>
> > Not really hard, it just has to be assessed for each driver separately.
> > We can just do it in gluster and refactor it later.
>
> Okay, so let's keep it as an option for now.
I tried this approach (option 2) in gluster and I was able to go past the hang
I was seeing earlier, but this causes other problems.
Let me restate what I am doing so that you could tell me if I am indeed
following the option 2 you mention above. I am doing the cleanup first
(qemu_aio_count-- and releasing the AIOCB) before calling the callback at
the end.
static void qemu_gluster_complete_aio(GlusterAIOCB *acb, BDRVGlusterState *s)
{
int ret;
bool *finished = acb->finished;
BlockDriverCompletionFunc *cb = acb->common.cb;
void *opaque = acb->common.opaque;
if (!acb->ret || acb->ret == acb->size) {
ret = 0; /* Success */
} else if (acb->ret < 0) {
ret = acb->ret; /* Read/Write failed */
} else {
ret = -EIO; /* Partial read/write - fail it */
}
s->qemu_aio_count--;
qemu_aio_release(acb);
cb(opaque, ret);
if (finished) {
*finished = true;
}
}
static void qemu_gluster_aio_event_reader(void *opaque)
{
BDRVGlusterState *s = opaque;
ssize_t ret;
do {
char *p = (char *)&s->event_acb;
ret = read(s->fds[GLUSTER_FD_READ], p + s->event_reader_pos,
sizeof(s->event_acb) - s->event_reader_pos);
if (ret > 0) {
s->event_reader_pos += ret;
if (s->event_reader_pos == sizeof(s->event_acb)) {
s->event_reader_pos = 0;
qemu_gluster_complete_aio(s->event_acb, s);
//s->qemu_aio_count--;
}
}
} while (ret < 0 && errno == EINTR);
}
qemu_gluster_aio_event_reader() is the node->io_read in qemu_aio_wait().
qemu_aio_wait() calls node->io_read() which calls qemu_gluster_complete_aio().
Before we return back to qemu_aio_wait(), many other things happen:
bdrv_close() gets called from qcow2_create2()
This closes the gluster connection, closes the pipe, does
qemu_set_fd_hander(read_pipe_fd, NULL, NULL, NULL, NULL), which results
in the AioHandler node being deleted from aio_handlers list.
Now qemu_gluster_aio_event_reader (node->io_read) which was called from
qemu_aio_wait() finally completes and goes ahead and accesses "node"
which has already been deleted. This causes segfault.
So I think the option 1 (scheduling a BH from node->io_read) would
be better for gluster.
Regards,
Bharata.
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Bharata B Rao, 2012/09/05
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Bharata B Rao, 2012/09/05
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Paolo Bonzini, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Kevin Wolf, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Paolo Bonzini, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Kevin Wolf, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Paolo Bonzini, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Kevin Wolf, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Paolo Bonzini, 2012/09/06
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend,
Bharata B Rao <=
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Paolo Bonzini, 2012/09/07
- Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Bharata B Rao, 2012/09/08
Re: [Qemu-devel] [PATCH v6 2/2] block: Support GlusterFS as a QEMU block backend, Kevin Wolf, 2012/09/05