Re: [Qemu-devel] [PATCH] rtl8139: implement 8139cp link status

[Jason Wang]

On 09/10/2012 03:59 PM, Amos Kong wrote:
> From: Jason Wang<address@hidden>
>
> Add a link status chang callback and change the link status bit in BMSR
> &  MSR accordingly. Tested in Linux/Windows guests.
>
> Signed-off-by: Jason Wang<address@hidden>
> Signed-off-by: Amos Kong<address@hidden>
> ---
>   hw/rtl8139.c |   23 +++++++++++++++++++++--
>   1 files changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/hw/rtl8139.c b/hw/rtl8139.c
> index 844f1b8..3c33908 100644
> --- a/hw/rtl8139.c
> +++ b/hw/rtl8139.c
> @@ -167,7 +167,7 @@ enum IntrStatusBits {
>       PCIErr = 0x8000,
>       PCSTimeout = 0x4000,
>       RxFIFOOver = 0x40,
> -    RxUnderrun = 0x20,
> +    RxUnderrun = 0x20, /* Packet Underrun / Link Change */
>       RxOverflow = 0x10,
>       TxErr = 0x08,
>       TxOK = 0x04,
> @@ -452,6 +452,7 @@ typedef struct RTL8139State {
>       uint8_t  Config0;
>       uint8_t  Config1;
>       uint8_t  Config3;
> +    uint8_t  MediaStatus;
>       uint8_t  Config4;
>       uint8_t  Config5;
>   

So the content of this register would be lost after migration?
> @@ -1246,6 +1247,7 @@ static void rtl8139_reset(DeviceState *d)
>       /* set initial state data */
>       s->Config0 = 0x0; /* No boot ROM */
>       s->Config1 = 0xC; /* IO mapped and MEM mapped registers available */
> +    s->MediaStatus = 0xd0; /* Power is present, TX/RX flow control enable */
>       s->Config3 = 0x1; /* fast back-to-back compatible */
>       s->Config5 = 0x0;
>
> @@ -3007,7 +3009,7 @@ static uint32_t rtl8139_io_readb(void *opaque, uint8_t 
> addr)
>               break;
>
>           case MediaStatus:
> -            ret = 0xd0;
> +            ret = s->MediaStatus;
>               DPRINTF("MediaStatus read 0x%x\n", ret);
>               break;
>
> @@ -3453,12 +3455,29 @@ static void pci_rtl8139_uninit(PCIDevice *dev)
>       qemu_del_net_client(&s->nic->nc);
>   }
>
> +static void rtl8139_set_link_status(NetClientState *nc)
> +{
> +    RTL8139State *s = DO_UPCAST(NICState, nc, nc)->opaque;
> +
> +    if (nc->link_down) {
> +        s->BasicModeStatus&= ~0x0004;
> +        s->MediaStatus |= 0x0004;
> +    } else {
> +        s->BasicModeStatus |= 0x0004;
> +        s->MediaStatus&= ~0x0004;
> +    }
> +
> +    s->IntrStatus |= RxUnderrun;
> +    rtl8139_update_irq(s);
> +}
> +
>   static NetClientInfo net_rtl8139_info = {
>       .type = NET_CLIENT_OPTIONS_KIND_NIC,
>       .size = sizeof(NICState),
>       .can_receive = rtl8139_can_receive,
>       .receive = rtl8139_receive,
>       .cleanup = rtl8139_cleanup,
> +    .link_status_changed = rtl8139_set_link_status,
>   };
>
>   static int pci_rtl8139_init(PCIDevice *dev)