qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v2 2/2] Versatile Express: add modelling of NOR


From: Francesco Lavra
Subject: Re: [Qemu-devel] [PATCH v2 2/2] Versatile Express: add modelling of NOR flash
Date: Tue, 18 Sep 2012 22:59:51 +0200
User-agent: Mozilla/5.0 (X11; Linux i686; rv:7.0.1) Gecko/20110929 Thunderbird/7.0.1

On 09/18/2012 03:46 PM, Peter Maydell wrote:
> On 17 September 2012 21:08, Francesco Lavra <address@hidden> wrote:
>> This patch adds modelling of the two NOR flash banks found on the
>> Versatile Express motherboard. Tested with U-Boot running on an emulated
>> Versatile Express, with either A9 or A15 CoreTile.
>>
>> Signed-off-by: Francesco Lavra <address@hidden>
>> ---
>> Changes in v2:
>> Use drive_get_next() instead of drive_get() to get a backing storage for
>> each flash bank.
>>
>>  hw/vexpress.c |   24 ++++++++++++++++++++++--
>>  1 files changed, 22 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/vexpress.c b/hw/vexpress.c
>> index 454c2bb..2ffeab1 100644
>> --- a/hw/vexpress.c
>> +++ b/hw/vexpress.c
>> @@ -29,8 +29,12 @@
>>  #include "sysemu.h"
>>  #include "boards.h"
>>  #include "exec-memory.h"
>> +#include "blockdev.h"
>> +#include "flash.h"
>>
>>  #define VEXPRESS_BOARD_ID 0x8e0
>> +#define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024)
>> +#define VEXPRESS_FLASH_SECT_SIZE (256 * 1024)
>>
>>  static struct arm_boot_info vexpress_binfo;
>>
>> @@ -355,6 +359,7 @@ static void vexpress_common_init(const VEDBoardInfo
>> *daughterboard,
> 
> Something in your email send path is wrapping long lines, which
> means 'git am' doesn't work cleanly. If you're planning on sending
> more QEMU patches you might want to look into getting this fixed.

Oops, sorry about that, if you want me to re-send the patch with these
artifacts fixed, just let me know.

>>      qemu_irq pic[64];
>>      uint32_t proc_id;
>>      uint32_t sys_id;
>> +    DriveInfo *dinfo;
>>      ram_addr_t vram_size, sram_size;
>>      MemoryRegion *sysmem = get_system_memory();
>>      MemoryRegion *vram = g_new(MemoryRegion, 1);
>> @@ -410,8 +415,23 @@ static void vexpress_common_init(const VEDBoardInfo
>> *daughterboard,
>>
>>      sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
>>
>> -    /* VE_NORFLASH0: not modelled */
>> -    /* VE_NORFLASH1: not modelled */
>> +    dinfo = drive_get_next(IF_PFLASH);
>> +    if (!pflash_cfi01_register(map[VE_NORFLASH0], NULL, "vexpress.flash0",
>> +            VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
>> +            VEXPRESS_FLASH_SECT_SIZE,
>> +            VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
>> +            0x00, 0x89, 0x00, 0x18, 0)) {
>> +        fprintf(stderr, "vexpress: error registering flash 0.\n");
> 
> Shouldn't these errors be fatal?

I checked the existing uses of pflash_cfi_0[1,2]_register() in the code,
and if I'm not mistaken only in 5 out of 19 devices these errors are
fatal, in the other 14 cases initialization continues even after flash
registration failure, with or without an error message. Let me know if
you still prefer these errors to be fatal.

>> +    }
>> +
>> +    dinfo = drive_get_next(IF_PFLASH);
>> +    if (!pflash_cfi01_register(map[VE_NORFLASH1], NULL, "vexpress.flash1",
>> +            VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
>> +            VEXPRESS_FLASH_SECT_SIZE,
>> +            VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
>> +            0x00, 0x89, 0x00, 0x18, 0)) {
>> +        fprintf(stderr, "vexpress: error registering flash 1.\n");
>> +    }
>>
>>      sram_size = 0x2000000;
>>      memory_region_init_ram(sram, "vexpress.sram", sram_size);
>> --
>> 1.7.5.4
> 
> Otherwise looks OK.
> 
> -- PMM

Thanks,
Francesco



reply via email to

[Prev in Thread] Current Thread [Next in Thread]