[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 2/4] QAPI: Introduce memchar-write QMP command
From: |
Lei Li |
Subject: |
[Qemu-devel] [PATCH 2/4] QAPI: Introduce memchar-write QMP command |
Date: |
Fri, 26 Oct 2012 03:54:33 +0800 |
Signed-off-by: Lei Li <address@hidden>
---
hmp-commands.hx | 17 +++++++++++++++++
hmp.c | 15 +++++++++++++++
hmp.h | 1 +
qapi-schema.json | 47 +++++++++++++++++++++++++++++++++++++++++++++++
qemu-char.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
qmp-commands.hx | 34 ++++++++++++++++++++++++++++++++++
6 files changed, 158 insertions(+), 0 deletions(-)
diff --git a/hmp-commands.hx b/hmp-commands.hx
index e0b537d..a37b8e9 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -825,6 +825,23 @@ Inject an NMI on the given CPU (x86 only).
ETEXI
{
+ .name = "memchar_write",
+ .args_type = "chardev:s,data:s",
+ .params = "chardev data",
+ .mhandler.cmd = hmp_memchar_write,
+ },
+
+STEXI
address@hidden memchar_write @var{chardev} @var{data}
address@hidden memchar_write
+Provide writing interface for CirMemCharDriver. Write @var{data}
+to cirmemchr char device. Note that we will add 'control' options
+for read and write command that specifies behavior when the queue
+is full/empty, for now just assume a drop behaver in these two commands.
+
+ETEXI
+
+ {
.name = "migrate",
.args_type = "detach:-d,blk:-b,inc:-i,uri:s",
.params = "[-d] [-b] [-i] uri",
diff --git a/hmp.c b/hmp.c
index 2b97982..082985b 100644
--- a/hmp.c
+++ b/hmp.c
@@ -683,6 +683,21 @@ void hmp_pmemsave(Monitor *mon, const QDict *qdict)
hmp_handle_error(mon, &errp);
}
+void hmp_memchar_write(Monitor *mon, const QDict *qdict)
+{
+ uint32_t size;
+ const char *chardev = qdict_get_str(qdict, "chardev");
+ const char *data = qdict_get_str(qdict, "data");
+ enum DataFormat format;
+ Error *errp = NULL;
+
+ size = strlen(data);
+ format = DATA_FORMAT_UTF8;
+ qmp_memchar_write(chardev, size, data, true, format, &errp);
+
+ hmp_handle_error(mon, &errp);
+}
+
static void hmp_cont_cb(void *opaque, int err)
{
if (!err) {
diff --git a/hmp.h b/hmp.h
index 71ea384..406ebb1 100644
--- a/hmp.h
+++ b/hmp.h
@@ -43,6 +43,7 @@ void hmp_system_powerdown(Monitor *mon, const QDict *qdict);
void hmp_cpu(Monitor *mon, const QDict *qdict);
void hmp_memsave(Monitor *mon, const QDict *qdict);
void hmp_pmemsave(Monitor *mon, const QDict *qdict);
+void hmp_memchar_write(Monitor *mon, const QDict *qdict);
void hmp_cont(Monitor *mon, const QDict *qdict);
void hmp_system_wakeup(Monitor *mon, const QDict *qdict);
void hmp_inject_nmi(Monitor *mon, const QDict *qdict);
diff --git a/qapi-schema.json b/qapi-schema.json
index c615ee2..43ef6bc 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -325,6 +325,53 @@
{ 'command': 'query-chardev', 'returns': ['ChardevInfo'] }
##
+# @DataFormat:
+#
+# An enumeration of data format. The default value would
+# be utf8.
+#
+# @utf8: The data format is 'utf8'.
+#
+# @base64: The data format is 'base64'.
+#
+# Note: The data format start with 'utf8' and 'base64',
+# will support other data format as well.
+#
+# Since: 1.3
+##
+{ 'enum': 'DataFormat'
+ 'data': [ 'utf8', 'base64' ] }
+
+##
+# @memchar-write:
+#
+# Provide writing interface for memchardev. Write data to memchar
+# char device.
+#
+# @chardev: the name of the memchar char device.
+#
+# @size: the size to write in bytes. Should be power of 2.
+#
+# @data: the source data write to memchar.
+#
+# @format: #optional the format of the data write to memchardev, by
+# default is 'utf8'.
+#
+# Returns: Nothing on success
+# If @chardev is not a valid memchr device, DeviceNotFound
+#
+# Notes: The option 'block' is not supported now due to the miss
+# feature in qmp. Will add it later when we gain the necessary
+# infrastructure enhancement. For now just assume 'drop' behaver
+# for this command.
+#
+# Since: 1.3
+##
+{ 'command': 'memchar-write',
+ 'data': {'chardev': 'str', 'size': 'int', 'data': 'str',
+ '*format': 'DataFormat'} }
+
+##
# @CommandInfo:
#
# Information about a QMP command
diff --git a/qemu-char.c b/qemu-char.c
index 45d2a86..78fc634 100644
--- a/qemu-char.c
+++ b/qemu-char.c
@@ -2713,6 +2713,50 @@ fail:
return NULL;
}
+void qmp_memchar_write(const char *chardev, int64_t size,
+ const char *data, bool has_format,
+ enum DataFormat format,
+ Error **errp)
+{
+ CharDriverState *chr;
+ guchar *write_data;
+ int ret;
+ gsize write_count;
+
+ chr = qemu_chr_find(chardev);
+ if (!chr) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, chardev);
+ return;
+ }
+
+ if (strcmp(chr->filename, "memchr") != 0) {
+ error_setg(errp,"%s is not memory char device\n", chardev);
+ return;
+ }
+
+ /* XXX: For the sync command as 'block', waiting for the qmp
+ * to support necessary feature. Now just act as 'drop' */
+ if (cirmem_chr_is_full(chr)) {
+ error_setg(errp, "Failed to write to memchr %s", chardev);
+ return;
+ }
+
+ write_count = (gsize)size;
+
+ if (has_format && (format == DATA_FORMAT_BASE64)) {
+ write_data = g_base64_decode(data, &write_count);
+ } else {
+ write_data = (uint8_t *)data;
+ }
+
+ ret = cirmem_chr_write(chr, write_data, write_count);
+
+ if (ret < 0) {
+ error_setg(errp, "Failed to write to memchr %s", chardev);
+ return;
+ }
+}
+
QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename)
{
char host[65], port[33], width[8], height[8];
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 5ba8c48..7548b9b 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -466,6 +466,40 @@ Note: inject-nmi fails when the guest doesn't support
injecting.
EQMP
{
+ .name = "memchar-write",
+ .args_type = "chardev:s,size:i,data:s,format:s?,control:s?",
+ .help = "write size of data to memchar chardev",
+ .mhandler.cmd_new = qmp_marshal_input_memchar_write,
+ },
+
+SQMP
+memchar-write
+-------------
+
+Provide writing interface for memchardev. Write data to memchar
+char device.
+
+Arguments:
+
+- "chardev": the name of the char device, must be unique (json-string)
+- "size": the memory size, in bytes, should be power of 2 (json-int)
+- "data": the source data writed to memchar (json-string)
+- "format": the data format write to memchardev, default is
+ utf8. (json-string, optional)
+ - Possible values: "utf8", "base64"
+
+Example:
+
+-> { "execute": "memchar-write",
+ "arguments": { "chardev": foo,
+ "size": 8,
+ "data": "abcdefgh",
+ "format": "utf8" } }
+<- { "return": {} }
+
+EQMP
+
+ {
.name = "xen-save-devices-state",
.args_type = "filename:F",
.mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,
--
1.7.7.6
- [Qemu-devel] [PATCH 0/4 V5] char: Add CirMemCharDriver and provide QMP interface, Lei Li, 2012/10/25
- [Qemu-devel] [PATCH 0/4 V5] char: Add CirMemCharDriver and provide QMP interface, Lei Li, 2012/10/25
- [Qemu-devel] [PATCH 1/4] qemu-char: Add new char backend CirMemCharDriver, Lei Li, 2012/10/25
- [Qemu-devel] [PATCH 2/4] QAPI: Introduce memchar-write QMP command, Lei Li, 2012/10/25
- [Qemu-devel] [PATCH 3/4] QAPI: Introduce memchar-read QMP command, Lei Li, 2012/10/25
- [Qemu-devel] [PATCH 4/4] HMP: Introduce console command, Lei Li, 2012/10/25
- Re: [Qemu-devel] [PATCH 0/4 V5] char: Add CirMemCharDriver and provide QMP interface, Lei Li, 2012/10/26