Re: [Qemu-devel] [PATCH 3/3] qtest: add migrate-test

[Paolo Bonzini]

----- Messaggio originale -----
> Da: "Jason Baron" <address@hidden>
> A: address@hidden
> Cc: address@hidden, address@hidden, address@hidden, address@hidden
> Inviato: Giovedì, 13 dicembre 2012 23:02:22
> Oggetto: [PATCH 3/3] qtest: add migrate-test
> 
> From: Jason Baron <address@hidden>
> 
> Tests a single 'pc' machine migration on the same host. Currently,
> the test
> fail for q35 since the ahci controller doesn't yet migrate. Will add
> support
> for q35 once the ahci support is accepted.
> 
> Would be nice to extend the test matrix to various machine versions,
> but that
> requires building multiple qemu binaries, which is a bit awkward in
> the
> context of qtest. Testing migration between different machine
> versions with the
> same binary doesn't seem too useful.
> 
> Signed-off-by: Jason Baron <address@hidden>
> ---
>  tests/Makefile       |    2 +
>  tests/migrate-test.c |  140
>  ++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 142 insertions(+), 0 deletions(-)
>  create mode 100644 tests/migrate-test.c
> 
> diff --git a/tests/Makefile b/tests/Makefile
> index 30a101d..d50dff0 100644
> --- a/tests/Makefile
> +++ b/tests/Makefile
> @@ -25,6 +25,7 @@ check-block-$(CONFIG_POSIX) +=
> tests/qemu-iotests-quick.sh
>  check-qtest-i386-y = tests/fdc-test$(EXESUF)
>  check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
>  check-qtest-i386-y += tests/rtc-test$(EXESUF)
> +check-qtest-i386-y += tests/migrate-test$(EXESUF)
>  check-qtest-x86_64-y = $(check-qtest-i386-y)
>  check-qtest-sparc-y = tests/m48t59-test$(EXESUF)
>  check-qtest-sparc64-y = tests/m48t59-test$(EXESUF)
> @@ -78,6 +79,7 @@ tests/rtc-test$(EXESUF): tests/rtc-test.o
> $(trace-obj-y) qstring.o
>  tests/m48t59-test$(EXESUF): tests/m48t59-test.o $(trace-obj-y)
>  tests/fdc-test$(EXESUF): tests/fdc-test.o tests/libqtest.o
>  $(trace-obj-y) qstring.o
>  tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o tests/libqtest.o
>  $(trace-obj-y) qstring.o
> +tests/migrate-test$(EXESUF): tests/migrate-test.o $(test-qapi-obj-y)
> $(qom-obj-y)
>  
>  # QTest rules
>  
> diff --git a/tests/migrate-test.c b/tests/migrate-test.c
> new file mode 100644
> index 0000000..c62d5af
> --- /dev/null
> +++ b/tests/migrate-test.c
> @@ -0,0 +1,140 @@
> +/*
> + * Migration tests
> + *
> + * Copyright Red Hat, Inc. 2012
> + *
> + * Authors:
> + *  Jason Baron   <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2
> or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +#include "libqtest.h"
> +
> +#include <glib.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +
> +#include "qjson.h"
> +#include "error.h"
> +#include "qemu/object.h"
> +#include "qdict.h"
> +#include "qbool.h"
> +
> +#define migrate_assert(cond) \
> +    if (!(cond)) {           \
> +        migrate_cleanup();   \
> +        fprintf(stderr, "%s:%d %s\n", __FILE__, __LINE__, #cond); \
> +        abort();             \
> +    }                        \
> +
> +static QTestState *mach_a;
> +static QTestState *mach_b;
> +
> +static void migrate_cleanup(void)
> +{
> +    if (mach_a) {
> +        qtest_quit(mach_a);
> +    }
> +    if (mach_b) {
> +        qtest_quit(mach_b);
> +    }
> +}
> +
> +static int expected_qobject(QObject *obj, qtype_code type)
> +{
> +    if (!obj) {
> +        return 0;
> +    }
> +    return (qobject_type(obj) == type);
> +}
> +
> +/*
> + * Return vals:
> + * 1: yes
> + * 0: no
> + * -1: retry
> + */
> +static int is_running(QTestState *mch)
> +{
> +    QString *resp = qstring_new();
> +    QObject *resp_obj;
> +    QObject *ret_obj;
> +    QObject *run_obj;
> +    int ret;
> +
> +    resp = qstring_new();
> +    qtest_qmp_resp(mch, resp, "{ 'execute': 'query-status' }",
> NULL);
> +
> +    resp_obj = qobject_from_json(qstring_get_str(resp));
> +    if (!expected_qobject(resp_obj, QTYPE_QDICT)) {
> +        ret = -1;
> +        goto out;
> +    }
> +
> +    ret_obj = qdict_get(qobject_to_qdict(resp_obj), "return");
> +    if (!expected_qobject(ret_obj, QTYPE_QDICT)) {
> +        ret = -1;
> +        goto out;
> +    }
> +
> +    run_obj = qdict_get(qobject_to_qdict(ret_obj), "running");
> +    if (!expected_qobject(run_obj, QTYPE_QBOOL)) {
> +        ret = -1;
> +        goto out;
> +    }
> +    ret = qbool_get_int(qobject_to_qbool(run_obj));
> +
> +out:
> +    qobject_decref(resp_obj);
> +    QDECREF(resp);
> +    return ret;
> +}
> +
> +#define SLEEP_INTERVAL 2
> +/* Abort after 2 minutes */
> +#define SLEEP_MAX (60 * 2)
> +
> +static void migrate_a_to_b(void)

Do you think this function could be turned into a libqtest call?
It would take mach_a as an argument, add -incoming tcp:localhost:4444
to the command line of mach_a, use that to spawn mach_b, and
return mach_b as the return value (or perhaps change mach_a to
refer to the new machine).

The reason is that I can anticipate having many migration qtests,
at least one for every subsection we ever had to add.

Paolo

> +{
> +    int a_run = 0;
> +    int b_run = 0;
> +    int iter = 0;
> +
> +    /* is running on A ? */
> +    migrate_assert(is_running(mach_a));
> +
> +    /* do migrate */
> +    qtest_qmp(mach_a, "{ 'execute': 'migrate',"
> +              "'arguments': { 'uri': 'tcp:0:4444' } }", NULL);
> +
> +    while (iter < SLEEP_MAX) {
> +        a_run = is_running(mach_a);
> +        b_run = is_running(mach_b);
> +        if ((a_run == 0) && (b_run == 1)) {
> +            break;
> +        }
> +        sleep(SLEEP_INTERVAL);
> +        iter += SLEEP_INTERVAL;
> +    }
> +    migrate_assert((a_run == 0) && (b_run == 1));
> +}
> +
> +int main(int argc, char **argv)
> +{
> +    int ret;
> +
> +    g_test_init(&argc, &argv, NULL);
> +
> +    mach_a = qtest_start("-display none -machine pc");
> +    mach_b = qtest_start("-display none -machine pc -incoming
> tcp:0:4444");
> +
> +    qtest_add_func("/migrate/a-to-b", migrate_a_to_b);
> +    ret = g_test_run();
> +
> +    migrate_cleanup();
> +    return ret;
> +}
> --
> 1.7.1
> 
>