[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 26/26] usbredir: Add support for buffered bulk inpu
|
From: |
Hans de Goede |
|
Subject: |
[Qemu-devel] [PATCH 26/26] usbredir: Add support for buffered bulk input |
|
Date: |
Fri, 14 Dec 2012 14:35:47 +0100 |
Buffered bulk mode is intended for bulk *input* endpoints, where the data is
of a streaming nature (not part of a command-response protocol). These
endpoints' input buffer may overflow if data is not read quickly enough.
So in buffered bulk mode the usb-host takes care of the submitting and
re-submitting of bulk transfers.
Buffered bulk mode is necessary for reliable operation with the bulk in
endpoints of usb to serial convertors. Unfortunatelty buffered bulk input
mode will only work with certain devices, therefor this patch also adds a
usb-id table to enable it for devices which need it, while leaving the
bulk ep handling for other devices unmodified.
Note that the bumping of the required usbredir from 0.5.3 to 0.6 does
not mean that we will now need a newer usbredir release then qemu-1.3,
.pc files reporting 0.5.3 have only ever existed in usbredir builds directly
from git, so qemu-1.3 needs the 0.6 release too.
Signed-off-by: Hans de Goede <address@hidden>
---
configure | 2 +-
hw/usb/redirect-ftdi-ids.h | 1255 ++++++++++++++++++++++++++++++++++++++++++
hw/usb/redirect-pl2303-ids.h | 150 +++++
hw/usb/redirect-usb-ids.h | 910 ++++++++++++++++++++++++++++++
hw/usb/redirect.c | 371 ++++++++++++-
5 files changed, 2669 insertions(+), 19 deletions(-)
create mode 100644 hw/usb/redirect-ftdi-ids.h
create mode 100644 hw/usb/redirect-pl2303-ids.h
create mode 100644 hw/usb/redirect-usb-ids.h
diff --git a/configure b/configure
index 994f731..e8ae685 100755
--- a/configure
+++ b/configure
@@ -2802,7 +2802,7 @@ fi
# check for usbredirparser for usb network redirection support
if test "$usb_redir" != "no" ; then
- if $pkg_config --atleast-version=0.5.3 libusbredirparser-0.5 >/dev/null
2>&1 ; then
+ if $pkg_config --atleast-version=0.6 libusbredirparser-0.5 >/dev/null 2>&1
; then
usb_redir="yes"
usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5
2>/dev/null)
usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5 2>/dev/null)
diff --git a/hw/usb/redirect-ftdi-ids.h b/hw/usb/redirect-ftdi-ids.h
new file mode 100644
index 0000000..57c12ef
--- /dev/null
+++ b/hw/usb/redirect-ftdi-ids.h
@@ -0,0 +1,1255 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - address@hidden - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID 0x0403 /* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
+#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
+#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+#define FTDI_LUMEL_PD12_PID 0x6002
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID 0xa6d0
+
+#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+
+/* US Interface Navigator (http://www.usinterface.com/) */
+#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
+#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */
+#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
+
+/* OOCDlink by Joern Kaipf <address@hidden>
+ * (http://www.joernonline.de/) */
+#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID 0xbcda
+
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID 0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
+#define FTDI_OPENDCC_GBM_PID 0xBFDC
+
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
+
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID 0xCFF8
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by address@hidden
+ */
+#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739
+
+/* Lenz LI-USB Computer Interface. */
+#define FTDI_LENZ_LIUSB_PID 0xD780
+
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID 0xF070
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID 0xD388
+#define XSENS_CONVERTER_1_PID 0xD389
+#define XSENS_CONVERTER_2_PID 0xD38A
+#define XSENS_CONVERTER_3_PID 0xD38B
+#define XSENS_CONVERTER_4_PID 0xD38C
+#define XSENS_CONVERTER_5_PID 0xD38D
+#define XSENS_CONVERTER_6_PID 0xD38E
+#define XSENS_CONVERTER_7_PID 0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID 0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID 0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID 0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID 0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID 0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID 0xDAFE
+#define FTDI_CHAMSYS_WING_PID 0xDAFF
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
+#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
+#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
+#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose
UMS 100 */
+#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger
TFD 128 */
+#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor
(EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
+#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
+#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2)
*/
+#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000)
*/
+#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM
100) */
+#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */
+#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID 0xE808
+#define FTDI_GUDEADS_E809_PID 0xE809
+#define FTDI_GUDEADS_E80A_PID 0xE80A
+#define FTDI_GUDEADS_E80B_PID 0xE80B
+#define FTDI_GUDEADS_E80C_PID 0xE80C
+#define FTDI_GUDEADS_E80D_PID 0xE80D
+#define FTDI_GUDEADS_E80E_PID 0xE80E
+#define FTDI_GUDEADS_E80F_PID 0xE80F
+#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID 0xE88A
+#define FTDI_GUDEADS_E88B_PID 0xE88B
+#define FTDI_GUDEADS_E88C_PID 0xE88C
+#define FTDI_GUDEADS_E88D_PID 0xE88D
+#define FTDI_GUDEADS_E88E_PID 0xE88E
+#define FTDI_GUDEADS_E88F_PID 0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID 0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device
(preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device
(preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO730_PID 0xed73
+#define HAMEG_HO720_PID 0xed72
+#define HAMEG_HO870_PID 0xed71
+
+/*
+ * MaxStream devices www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <address@hidden>
+ * and Mike Studer (K6EEP) <address@hidden>.
+ * Ian Abbott <address@hidden> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
+#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
+
+/* Domintell products http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
+#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+ (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
+#define FTDI_ACTZWAVE_PID 0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
+#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
+#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://www.usbuirt.com/ */
+#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID 0xF9D0
+#define FTDI_CCSICDU40_1_PID 0xF9D1
+#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
+#define INSIDE_ACCESSO 0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
+#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and
R230) */
+#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
+#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
+
+/*
+ * Sony Ericsson product ids
+ */
+#define FTDI_DSS20_PID 0xFC82 /* DSS-20 Sync Station for Sony
Ericsson P800 */
+#define FTDI_URBAN_0_PID 0xFC8A /* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID 0xFC8B /* Sony Ericsson Urban, uart #1 */
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707
(FTDI_VID) */
+
+#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID 0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service. The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485
interface) */
+#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA
SRAM-cards */
+#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz)
*/
+#define FTDI_IBS_PROD_PID 0xff3f /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/*
+ * TavIR AVR product ids (FTDI_VID)
+ */
+#define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */
+
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol
Adapter */
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID 0x03eb /* Vendor ID */
+#define STK541_PID 0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 0x0456
+#define ADI_GNICE_PID 0xF000
+#define ADI_GNICEPLUS_PID 0xF001
+
+/*
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications. The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
+ */
+#define MICROCHIP_VID 0x04D8
+#define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
+/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID 0x0647 /* Vendor ID */
+#define ACTON_SPECTRAPRO_PID 0x0100
+
+/*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID 0x06CE /* Vendor ID */
+#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID 0xAC11
+#define BANDB_USPTL4_PID 0xAC12
+#define BANDB_USO9ML2DR_2_PID 0xAC16
+#define BANDB_USO9ML2DR_PID 0xAC17
+#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232
Converter */
+#define BANDB_USOPTL4DR_PID 0xAC19
+#define BANDB_485USB9F_2W_PID 0xAC25
+#define BANDB_485USB9F_4W_PID 0xAC26
+#define BANDB_232USB9M_PID 0xAC27
+#define BANDB_485USBTB_2W_PID 0xAC33
+#define BANDB_485USBTB_4W_PID 0xAC34
+#define BANDB_TTL5USB9M_PID 0xAC49
+#define BANDB_TTL3USB9M_PID 0xAC50
+#define BANDB_ZZ_PROG1_USB_PID 0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID 0x093C
+#define INTREPID_VALUECAN_PID 0x0601
+#define INTREPID_NEOVI_PID 0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID 0x0B39 /* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */
+#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
+
+/*
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID 0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID 0Xa02a /* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID 0Xa02b /* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID 0Xa02c /* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID 0Xa02d /* SeaLINK+8 (2803-ROHS) Port 7+8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://www.elektor.com/)
+ */
+#define ELEKTOR_VID 0x0C7D
+#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID 0x0d3a /* Vendor ID */
+#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
+#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID 0x0F94 /* Vendor Id */
+#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack */
+#define LARSENBRUSGAARD_VID 0x0FD8
+#define LB_ALTITRACK_PID 0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID 0x103E /* Vendor Id */
+#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID 0x1209
+#define INTERBIOMETRICS_IOBOARD_PID 0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID 0x128D
+#define TESTO_USB_INTERFACE_PID 0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID 0x1342
+#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200
serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <address@hidden>
+ */
+#define FIC_VID 0x1457
+#define FIC_NEO1973_DEBUG_PID 0x5118
+
+/* Olimex */
+#define OLIMEX_VID 0x15BA
+#define OLIMEX_ARM_USB_OCD_PID 0x0003
+#define OLIMEX_ARM_USB_OCD_H_PID 0x002b
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID 0x1781 /* Vendor ID */
+#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz
using FT232RL */
+
+/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7
Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
+
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */
+
+#define PI_VID 0x1a72 /* Vendor ID */
+#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
+#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation
Module */
+#define PI_C863_PID 0x1007 /* PI C-863 */
+#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */
+#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */
+#define PI_1012_PID 0x1012 /* PI Motion Controller */
+#define PI_1013_PID 0x1013 /* PI Motion Controller */
+#define PI_1014_PID 0x1014 /* PI Device */
+#define PI_1015_PID 0x1015 /* PI Device */
+#define PI_1016_PID 0x1016 /* PI Digital Servo Module */
+
+/*
+ * Kondo Kagaku Co.Ltd.
+ * http://www.kondo-robot.com/EN
+ */
+#define KONDO_VID 0x165c
+#define KONDO_USB_SERIAL_PID 0x0002
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID 0x1B91 /* Vendor ID */
+#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
+
+/* Alti-2 products http://www.alti-2.com */
+#define ALTI2_VID 0x1BC9
+#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
+
+/*
+ * Ionics PlugComputer
+ */
+#define IONICS_VID 0x1c0c
+#define IONICS_PLUGCOMPUTER_PID 0x0102
+
+/*
+ * Dresden Elektronik Sensor Terminal Board
+ */
+#define DE_VID 0x1cf1 /* Vendor ID */
+#define STB_PID 0x0001 /* Sensor Terminal Board */
+#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * STMicroelectonics
+ */
+#define ST_VID 0x0483
+#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID 0x5050 /* Vendor ID */
+#define PAPOUCH_SB485_PID 0x0100 /* Papouch SB485 USB-485/422
Converter */
+#define PAPOUCH_AP485_PID 0x0101 /* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_PID 0x0102 /* Papouch SB422 USB-RS422
Converter */
+#define PAPOUCH_SB485_2_PID 0x0103 /* Papouch SB485 USB-485/422
Converter */
+#define PAPOUCH_AP485_2_PID 0x0104 /* AP485 USB-RS485 Converter */
+#define PAPOUCH_SB422_2_PID 0x0105 /* Papouch SB422 USB-RS422
Converter */
+#define PAPOUCH_SB485S_PID 0x0106 /* Papouch SB485S USB-485/422
Converter */
+#define PAPOUCH_SB485C_PID 0x0107 /* Papouch SB485C USB-485/422
Converter */
+#define PAPOUCH_LEC_PID 0x0300 /* LEC USB Converter */
+#define PAPOUCH_SB232_PID 0x0301 /* Papouch SB232 USB-RS232
Converter */
+#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer
*/
+#define PAPOUCH_IRAMP_PID 0x0500 /* Papouch IRAmp Duplex */
+#define PAPOUCH_DRAK5_PID 0x0700 /* Papouch DRAK5 */
+#define PAPOUCH_QUIDO8x8_PID 0x0800 /* Papouch Quido 8/8 Module */
+#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Papouch Quido 4/4 Module */
+#define PAPOUCH_QUIDO2x2_PID 0x0a00 /* Papouch Quido 2/2 Module */
+#define PAPOUCH_QUIDO10x1_PID 0x0b00 /* Papouch Quido 10/1 Module */
+#define PAPOUCH_QUIDO30x3_PID 0x0c00 /* Papouch Quido 30/3 Module */
+#define PAPOUCH_QUIDO60x3_PID 0x0d00 /* Papouch Quido 60(100)/3
Module */
+#define PAPOUCH_QUIDO2x16_PID 0x0e00 /* Papouch Quido 2/16 Module */
+#define PAPOUCH_QUIDO3x32_PID 0x0f00 /* Papouch Quido 3/32 Module */
+#define PAPOUCH_DRAK6_PID 0x1000 /* Papouch DRAK6 */
+#define PAPOUCH_UPSUSB_PID 0x8000 /* Papouch UPS-USB adapter */
+#define PAPOUCH_MU_PID 0x8001 /* MU controller */
+#define PAPOUCH_SIMUKEY_PID 0x8002 /* Papouch SimuKey */
+#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
+#define PAPOUCH_GMUX_PID 0x8004 /* Papouch GOLIATH MUX */
+#define PAPOUCH_GMSR_PID 0x8005 /* Papouch GOLIATH MSR */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID 0xDEEE /* Vendor ID */
+#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2
(FT232AM)*/
+#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID
(FT232BM)*/
+#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID 0x9378
+#define MJSG_SR_RADIO_PID 0x9379
+#define MJSG_XM_RADIO_PID 0x937A
+#define MJSG_HD_RADIO_PID 0x937C
+
+/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+
+/*
+ * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
+ * Submitted by John G. Rogers
+ */
+#define SEGWAY_RMP200_PID 0xe729
+
+
+/*
+ * Accesio USB Data Acquisition products (http://www.accesio.com/)
+ */
+#define ACCESIO_COM4SM_PID 0xD578
+
+/* www.sciencescope.co.uk educational dataloggers */
+#define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18
+#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C
+#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID 0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
+
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID 0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID 0xF60B
+
+/*
+ * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de
+ */
+/* TagTracer MIFARE*/
+#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106 0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID 0xA951
diff --git a/hw/usb/redirect-pl2303-ids.h b/hw/usb/redirect-pl2303-ids.h
new file mode 100644
index 0000000..8dbdb46
--- /dev/null
+++ b/hw/usb/redirect-pl2303-ids.h
@@ -0,0 +1,150 @@
+/*
+ * Prolific PL2303 USB to serial adaptor driver header file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#define BENQ_VENDOR_ID 0x04a5
+#define BENQ_PRODUCT_ID_S81 0x4027
+
+#define PL2303_VENDOR_ID 0x067b
+#define PL2303_PRODUCT_ID 0x2303
+#define PL2303_PRODUCT_ID_RSAQ2 0x04bb
+#define PL2303_PRODUCT_ID_DCU11 0x1234
+#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
+#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
+#define PL2303_PRODUCT_ID_ALDIGA 0x0611
+#define PL2303_PRODUCT_ID_MMX 0x0612
+#define PL2303_PRODUCT_ID_GPRS 0x0609
+#define PL2303_PRODUCT_ID_HCR331 0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
+
+#define ATEN_VENDOR_ID 0x0557
+#define ATEN_VENDOR_ID2 0x0547
+#define ATEN_PRODUCT_ID 0x2008
+
+#define IODATA_VENDOR_ID 0x04bb
+#define IODATA_PRODUCT_ID 0x0a03
+#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e
+
+#define ELCOM_VENDOR_ID 0x056e
+#define ELCOM_PRODUCT_ID 0x5003
+#define ELCOM_PRODUCT_ID_UCSGT 0x5004
+
+#define ITEGNO_VENDOR_ID 0x0eba
+#define ITEGNO_PRODUCT_ID 0x1080
+#define ITEGNO_PRODUCT_ID_2080 0x2080
+
+#define MA620_VENDOR_ID 0x0df7
+#define MA620_PRODUCT_ID 0x0620
+
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID 0xb000
+
+#define TRIPP_VENDOR_ID 0x2478
+#define TRIPP_PRODUCT_ID 0x2008
+
+#define RADIOSHACK_VENDOR_ID 0x1453
+#define RADIOSHACK_PRODUCT_ID 0x4026
+
+#define DCU10_VENDOR_ID 0x0731
+#define DCU10_PRODUCT_ID 0x0528
+
+#define SITECOM_VENDOR_ID 0x6189
+#define SITECOM_PRODUCT_ID 0x2068
+
+/* Alcatel OT535/735 USB cable */
+#define ALCATEL_VENDOR_ID 0x11f7
+#define ALCATEL_PRODUCT_ID 0x02df
+
+/* Samsung I330 phone cradle */
+#define SAMSUNG_VENDOR_ID 0x04e8
+#define SAMSUNG_PRODUCT_ID 0x8001
+
+#define SIEMENS_VENDOR_ID 0x11f5
+#define SIEMENS_PRODUCT_ID_SX1 0x0001
+#define SIEMENS_PRODUCT_ID_X65 0x0003
+#define SIEMENS_PRODUCT_ID_X75 0x0004
+#define SIEMENS_PRODUCT_ID_EF81 0x0005
+
+#define SYNTECH_VENDOR_ID 0x0745
+#define SYNTECH_PRODUCT_ID 0x0001
+
+/* Nokia CA-42 Cable */
+#define NOKIA_CA42_VENDOR_ID 0x078b
+#define NOKIA_CA42_PRODUCT_ID 0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID 0x10b5
+#define CA_42_CA42_PRODUCT_ID 0xac70
+
+#define SAGEM_VENDOR_ID 0x079b
+#define SAGEM_PRODUCT_ID 0x0027
+
+/* Leadtek GPS 9531 (ID 0413:2101) */
+#define LEADTEK_VENDOR_ID 0x0413
+#define LEADTEK_9531_PRODUCT_ID 0x2101
+
+/* USB GSM cable from Speed Dragon Multimedia, Ltd */
+#define SPEEDDRAGON_VENDOR_ID 0x0e55
+#define SPEEDDRAGON_PRODUCT_ID 0x110b
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID 0x0731
+#define DATAPILOT_U2_PRODUCT_ID 0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID 0x050d
+#define BELKIN_PRODUCT_ID 0x0257
+
+/* Alcor Micro Corp. USB 2.0 TO RS-232 */
+#define ALCOR_VENDOR_ID 0x058F
+#define ALCOR_PRODUCT_ID 0x9720
+
+/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
+#define WS002IN_VENDOR_ID 0x11f6
+#define WS002IN_PRODUCT_ID 0x2001
+
+/* Corega CG-USBRS232R Serial Adapter */
+#define COREGA_VENDOR_ID 0x07aa
+#define COREGA_PRODUCT_ID 0x002a
+
+/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
+#define YCCABLE_VENDOR_ID 0x05ad
+#define YCCABLE_PRODUCT_ID 0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID 0x5372
+#define SUPERIAL_PRODUCT_ID 0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID 0x03f0
+#define HP_LD220_PRODUCT_ID 0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID 0x04b8
+#define CRESSI_EDY_PRODUCT_ID 0x0521
+
+/* Zeagle dive computer interface */
+#define ZEAGLE_VENDOR_ID 0x04b8
+#define ZEAGLE_N2ITION3_PRODUCT_ID 0x0522
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID 0x054c
+#define SONY_QN3USB_PRODUCT_ID 0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID 0x11ad
+#define SANWA_PRODUCT_ID 0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID 0x0b63
+#define ADLINK_ND6530_PRODUCT_ID 0x6530
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID 0x0b8c
+#define SMART_PRODUCT_ID 0x2303
diff --git a/hw/usb/redirect-usb-ids.h b/hw/usb/redirect-usb-ids.h
new file mode 100644
index 0000000..7eeda08
--- /dev/null
+++ b/hw/usb/redirect-usb-ids.h
@@ -0,0 +1,910 @@
+/*
+ * USB-ids / quirk-tables for USB redirector usb-guest
+ *
+ * Copyright (c) 2012 Red Hat, Inc.
+ *
+ * Red Hat Authors:
+ * Hans de Goede <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* 1 on 1 copy of linux/drivers/usb/serial/ftdi_sio_ids.h */
+#include "redirect-ftdi-ids.h"
+/* 1 on 1 copy of linux/drivers/usb/serial/pl2303.h */
+#include "redirect-pl2303-ids.h"
+
+struct usb_device_id {
+ int vendor_id;
+ int product_id;
+ int interface_class;
+ int interface_subclass;
+ int interface_protocol;
+};
+
+#define USB_DEVICE(vendor, product) \
+ .vendor_id = vendor, .product_id = product, .interface_class = -1,
+
+#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, iclass, isubclass, iproto) \
+ .vendor_id = vend, .product_id = prod, .interface_class = iclass, \
+ .interface_subclass = isubclass, .interface_protocol = iproto
+
+static const struct usb_device_id usbredir_raw_serial_ids[] = {
+ /*
+ * Silicon Laboratories CP210x USB to RS232 serial adapter ids
+ * copied from linux/drivers/usb/serial/cp210x.c
+ *
+ * Copyright (C) 2005 Craig Shelley (address@hidden)
+ */
+ { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
+ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
+ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM
Mobile */
+ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM
Mobile */
+ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000
*/
+ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless
smartcard reader */
+ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC
Device */
+ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher
Acceptor */
+ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
+ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
+ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
+ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
+ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+ { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+ { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in
converter */
+ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
+ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc.,
Optris infrared thermometer */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
+ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
+ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
+ { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
+ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+ { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
+ { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH,
Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH,
Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
+ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH,
HARP-1 */
+ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc.,
Fasttrax GPS demonstration module */
+ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
+ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
+ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF
Booster/Attenuator */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS
Modem */
+ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
+ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
+ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
+ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
+ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem
100EU */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal
Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC
Interface */
+ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White
Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour
Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural
Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio
Matrix Switcher */
+ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+ { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power
Supply */
+ { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote
Control for MARATON Power Supply */
+ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi
Channel Power Supply */
+ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML
Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+
+ /*
+ * Prolific pl2303 USB to RS232 serial adapter ids
+ * copied from linux/drivers/usb/serial/pl2303.c
+ *
+ * Copyright (C) 2001-2007 Greg Kroah-Hartman (address@hidden)
+ * Copyright (C) 2003 IBM Corp.
+ */
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+ { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+ { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
+ { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
+ { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
+ { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
+ { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
+ { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
+ { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
+ { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
+ { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
+ { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
+ { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+ { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
+ { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+ { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+ { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+ { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+ { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+ { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
+ { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+ { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+ { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+
+ { USB_DEVICE(-1, -1) } /* Terminating Entry */
+};
+
+static const struct usb_device_id usbredir_ftdi_serial_ids[] = {
+ /*
+ * FTDI USB to RS232 serial adapter ids
+ * copied from linux/drivers/usb/serial/ftdi_sio.c
+ *
+ * Copyright (C) 2009 - 2010
+ * Johan Hovold (address@hidden)
+ * Copyright (C) 1999 - 2001
+ * Greg Kroah-Hartman (address@hidden)
+ * Bill Ryder (address@hidden)
+ * Copyright (C) 2002
+ * Kuba Ober (address@hidden)
+ */
+ { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
+ { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+ { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
+ { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
+ { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+ { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+ { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
+ { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
+ { USB_DEVICE(OCT_VID, OCT_US101_PID) },
+ { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
+ { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
+ { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
+ { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
+ { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID) },
+ /*
+ * ELV devices:
+ */
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
+ { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
+ { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
+ { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
+ { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
+ { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
+ { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
+ { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
+ { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
+ { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
+ { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+ { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
+ { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
+ { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
+ { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+ { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
+ { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID) },
+ { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
+ { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
+ { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID) },
+ { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID) },
+ { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID) },
+ { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID) },
+ { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID) },
+ { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID) },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+ { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+
+ /* Papouch devices based on FTDI chip */
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
+
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+ { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+ { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
+ { USB_DEVICE(ATMEL_VID, STK541_PID) },
+ { USB_DEVICE(DE_VID, STB_PID) },
+ { USB_DEVICE(DE_VID, WHT_PID) },
+ { USB_DEVICE(ADI_VID, ADI_GNICE_PID) },
+ { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+ 0xff, 0xff, 0x00) },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+ { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID) },
+ { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+ { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C865_PID) },
+ { USB_DEVICE(FTDI_VID, PI_C857_PID) },
+ { USB_DEVICE(PI_VID, PI_C866_PID) },
+ { USB_DEVICE(PI_VID, PI_C663_PID) },
+ { USB_DEVICE(PI_VID, PI_C725_PID) },
+ { USB_DEVICE(PI_VID, PI_E517_PID) },
+ { USB_DEVICE(PI_VID, PI_C863_PID) },
+ { USB_DEVICE(PI_VID, PI_E861_PID) },
+ { USB_DEVICE(PI_VID, PI_C867_PID) },
+ { USB_DEVICE(PI_VID, PI_E609_PID) },
+ { USB_DEVICE(PI_VID, PI_E709_PID) },
+ { USB_DEVICE(PI_VID, PI_100F_PID) },
+ { USB_DEVICE(PI_VID, PI_1011_PID) },
+ { USB_DEVICE(PI_VID, PI_1012_PID) },
+ { USB_DEVICE(PI_VID, PI_1013_PID) },
+ { USB_DEVICE(PI_VID, PI_1014_PID) },
+ { USB_DEVICE(PI_VID, PI_1015_PID) },
+ { USB_DEVICE(PI_VID, PI_1016_PID) },
+ { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
+ { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+ { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID) },
+ { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID) },
+ { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
+ { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
+ { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
+ { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID) },
+ { USB_DEVICE(ST_VID, ST_STMCLT1030_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+ { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+
+ { USB_DEVICE(-1, -1) } /* Terminating Entry */
+};
+
+#undef USB_DEVICE
+#undef USB_DEVICE_AND_INTERFACE_INFO
diff --git a/hw/usb/redirect.c b/hw/usb/redirect.c
index bc36210..6dcd0eb 100644
--- a/hw/usb/redirect.c
+++ b/hw/usb/redirect.c
@@ -37,6 +37,7 @@
#include <usbredirparser.h>
#include <usbredirfilter.h>
+#include "redirect-usb-ids.h"
#include "hw/usb.h"
#define MAX_ENDPOINTS 32
@@ -51,11 +52,13 @@
typedef struct USBRedirDevice USBRedirDevice;
-/* Struct to hold buffered packets (iso or int input packets) */
+/* Struct to hold buffered packets */
struct buf_packet {
uint8_t *data;
- int len;
- int status;
+ void *free_on_destroy;
+ uint16_t len;
+ uint16_t offset;
+ uint8_t status;
QTAILQ_ENTRY(buf_packet)next;
};
@@ -69,11 +72,14 @@ struct endp_data {
uint8_t iso_error; /* For reporting iso errors to the HC */
uint8_t interrupt_started;
uint8_t interrupt_error;
+ uint8_t bulk_receiving_enabled;
+ uint8_t bulk_receiving_started;
uint8_t bufpq_prefilled;
uint8_t bufpq_dropping_packets;
QTAILQ_HEAD(, buf_packet) bufpq;
int32_t bufpq_size;
int32_t bufpq_target_size;
+ USBPacket *pending_async_packet;
};
struct PacketIdQueueEntry {
@@ -107,6 +113,7 @@ struct USBRedirDevice {
struct endp_data endpoint[MAX_ENDPOINTS];
struct PacketIdQueue cancelled;
struct PacketIdQueue already_in_flight;
+ void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t);
/* Data for device filtering */
struct usb_redir_device_connect_header device_info;
struct usb_redir_interface_info_header interface_info;
@@ -134,6 +141,8 @@ static void usbredir_interrupt_receiving_status(void *priv,
uint64_t id,
*interrupt_receiving_status);
static void usbredir_bulk_streams_status(void *priv, uint64_t id,
struct usb_redir_bulk_streams_status_header *bulk_streams_status);
+static void usbredir_bulk_receiving_status(void *priv, uint64_t id,
+ struct usb_redir_bulk_receiving_status_header *bulk_receiving_status);
static void usbredir_control_packet(void *priv, uint64_t id,
struct usb_redir_control_packet_header *control_packet,
uint8_t *data, int data_len);
@@ -146,6 +155,9 @@ static void usbredir_iso_packet(void *priv, uint64_t id,
static void usbredir_interrupt_packet(void *priv, uint64_t id,
struct usb_redir_interrupt_packet_header *interrupt_header,
uint8_t *data, int data_len);
+static void usbredir_buffered_bulk_packet(void *priv, uint64_t id,
+ struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet,
+ uint8_t *data, int data_len);
static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p,
int status);
@@ -329,12 +341,19 @@ static void packet_id_queue_empty(struct PacketIdQueue *q)
static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p)
{
USBRedirDevice *dev = DO_UPCAST(USBRedirDevice, dev, udev);
+ int i = USBEP2I(p->ep);
if (p->combined) {
usb_combined_packet_cancel(udev, p);
return;
}
+ if (dev->endpoint[i].pending_async_packet) {
+ assert(dev->endpoint[i].pending_async_packet == p);
+ dev->endpoint[i].pending_async_packet = NULL;
+ return;
+ }
+
packet_id_queue_add(&dev->cancelled, p->id);
usbredirparser_send_cancel_data_packet(dev->parser, p->id);
usbredirparser_do_write(dev->parser);
@@ -353,6 +372,11 @@ static void
usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev,
{
static USBPacket *p;
+ /* async handled packets for bulk receiving eps do not count as inflight */
+ if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) {
+ return;
+ }
+
QTAILQ_FOREACH(p, &ep->queue, queue) {
/* Skip combined packets, except for the first */
if (p->combined && p != p->combined->first) {
@@ -400,8 +424,8 @@ static USBPacket *usbredir_find_packet_by_id(USBRedirDevice
*dev,
return p;
}
-static void bufp_alloc(USBRedirDevice *dev,
- uint8_t *data, int len, int status, uint8_t ep)
+static void bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len,
+ uint8_t status, uint8_t ep, void *free_on_destroy)
{
struct buf_packet *bufp;
@@ -425,7 +449,9 @@ static void bufp_alloc(USBRedirDevice *dev,
bufp = g_malloc(sizeof(struct buf_packet));
bufp->data = data;
bufp->len = len;
+ bufp->offset = 0;
bufp->status = status;
+ bufp->free_on_destroy = free_on_destroy;
QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
dev->endpoint[EP2I(ep)].bufpq_size++;
}
@@ -435,7 +461,7 @@ static void bufp_free(USBRedirDevice *dev, struct
buf_packet *bufp,
{
QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next);
dev->endpoint[EP2I(ep)].bufpq_size--;
- free(bufp->data);
+ free(bufp->free_on_destroy);
g_free(bufp);
}
@@ -586,19 +612,162 @@ static void usbredir_stop_iso_stream(USBRedirDevice
*dev, uint8_t ep)
usbredir_free_bufpq(dev, ep);
}
+/*
+ * The usb-host may poll the endpoint faster then our guest, resulting in lots
+ * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine
+ * data from multiple bulkp-s into a single packet, avoiding bufpq overflows.
+ */
+static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev,
+ struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep)
+{
+ usb_packet_copy(p, bulkp->data + bulkp->offset, count);
+ bulkp->offset += count;
+ if (bulkp->offset == bulkp->len) {
+ /* Store status in the last packet with data from this bulkp */
+ usbredir_handle_status(dev, p, bulkp->status);
+ bufp_free(dev, bulkp, ep);
+ }
+}
+
+static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ struct buf_packet *bulkp;
+ int count;
+
+ while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) &&
+ p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) {
+ count = bulkp->len - bulkp->offset;
+ if (count > (p->iov.size - p->actual_length)) {
+ count = p->iov.size - p->actual_length;
+ }
+ usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep);
+ }
+}
+
+static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ const int maxp = dev->endpoint[EP2I(ep)].max_packet_size;
+ uint8_t header[2] = { 0, 0 };
+ struct buf_packet *bulkp;
+ int count;
+
+ while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) &&
+ p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) {
+ if (bulkp->len < 2) {
+ WARNING("malformed ftdi bulk in packet\n");
+ bufp_free(dev, bulkp, ep);
+ continue;
+ }
+
+ if ((p->actual_length % maxp) == 0) {
+ usb_packet_copy(p, bulkp->data, 2);
+ memcpy(header, bulkp->data, 2);
+ } else {
+ if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) {
+ break; /* Different header, add to next packet */
+ }
+ }
+
+ if (bulkp->offset == 0) {
+ bulkp->offset = 2; /* Skip header */
+ }
+ count = bulkp->len - bulkp->offset;
+ /* Must repeat the header at maxp interval */
+ if (count > (maxp - (p->actual_length % maxp))) {
+ count = maxp - (p->actual_length % maxp);
+ }
+ usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep);
+ }
+}
+
+static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
+ dev->buffered_bulk_in_complete(dev, p, ep);
+ DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n",
+ ep, p->status, p->actual_length, p->id);
+}
+
+static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev,
+ USBPacket *p, uint8_t ep)
+{
+ /* Input bulk endpoint, buffered packet input */
+ if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) {
+ int bpt;
+ struct usb_redir_start_bulk_receiving_header start = {
+ .endpoint = ep,
+ .stream_id = 0,
+ .no_transfers = 5,
+ };
+ /* Round bytes_per_transfer up to a multiple of max_packet_size */
+ bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1;
+ bpt /= dev->endpoint[EP2I(ep)].max_packet_size;
+ bpt *= dev->endpoint[EP2I(ep)].max_packet_size;
+ start.bytes_per_transfer = bpt;
+ /* No id, we look at the ep when receiving a status back */
+ usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start);
+ usbredirparser_do_write(dev->parser);
+ DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n",
+ start.bytes_per_transfer, start.no_transfers, ep);
+ dev->endpoint[EP2I(ep)].bulk_receiving_started = 1;
+ /* We don't really want to drop bulk packets ever, but
+ having some upper limit to how much we buffer is good. */
+ dev->endpoint[EP2I(ep)].bufpq_target_size = 5000;
+ dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0;
+ }
+
+ if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) {
+ DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep);
+ assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL);
+ dev->endpoint[EP2I(ep)].pending_async_packet = p;
+ p->status = USB_RET_ASYNC;
+ return;
+ }
+ usbredir_buffered_bulk_in_complete(dev, p, ep);
+}
+
+static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep)
+{
+ struct usb_redir_stop_bulk_receiving_header stop_bulk = {
+ .endpoint = ep,
+ .stream_id = 0,
+ };
+ if (dev->endpoint[EP2I(ep)].bulk_receiving_started) {
+ usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk);
+ DPRINTF("bulk receiving stopped ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].bulk_receiving_started = 0;
+ }
+ usbredir_free_bufpq(dev, ep);
+}
+
static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p,
uint8_t ep)
{
struct usb_redir_bulk_packet_header bulk_packet;
size_t size = (p->combined) ? p->combined->iov.size : p->iov.size;
-
- DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id);
+ const int maxp = dev->endpoint[EP2I(ep)].max_packet_size;
if (usbredir_already_in_flight(dev, p->id)) {
p->status = USB_RET_ASYNC;
return;
}
+ if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) {
+ if (size != 0 && (size % maxp) == 0) {
+ usbredir_handle_buffered_bulk_in_data(dev, p, ep);
+ return;
+ }
+ WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep);
+ assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL);
+ usbredir_stop_bulk_receiving(dev, ep);
+ dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0;
+ }
+
+ DPRINTF("bulk-out ep %02X len %zd id %"PRIu64"\n", ep, size, p->id);
+
bulk_packet.endpoint = ep;
bulk_packet.length = size;
bulk_packet.stream_id = 0;
@@ -735,9 +904,6 @@ static void usbredir_handle_data(USBDevice *udev, USBPacket
*p)
ERROR("handle_data called for control transfer on ep %02X\n", ep);
p->status = USB_RET_NAK;
break;
- case USB_ENDPOINT_XFER_ISOC:
- usbredir_handle_iso_data(dev, p, ep);
- break;
case USB_ENDPOINT_XFER_BULK:
if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN &&
p->ep->pipeline) {
@@ -746,6 +912,9 @@ static void usbredir_handle_data(USBDevice *udev, USBPacket
*p)
}
usbredir_handle_bulk_data(dev, p, ep);
break;
+ case USB_ENDPOINT_XFER_ISOC:
+ usbredir_handle_iso_data(dev, p, ep);
+ break;
case USB_ENDPOINT_XFER_INT:
if (ep & USB_DIR_IN) {
usbredir_handle_interrupt_in_data(dev, p, ep);
@@ -772,6 +941,11 @@ static void usbredir_stop_ep(USBRedirDevice *dev, int i)
uint8_t ep = I2EP(i);
switch (dev->endpoint[i].type) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (ep & USB_DIR_IN) {
+ usbredir_stop_bulk_receiving(dev, ep);
+ }
+ break;
case USB_ENDPOINT_XFER_ISOC:
usbredir_stop_iso_stream(dev, ep);
break;
@@ -951,10 +1125,12 @@ static void usbredir_create_parser(USBRedirDevice *dev)
dev->parser->interrupt_receiving_status_func =
usbredir_interrupt_receiving_status;
dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status;
+ dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status;
dev->parser->control_packet_func = usbredir_control_packet;
dev->parser->bulk_packet_func = usbredir_bulk_packet;
dev->parser->iso_packet_func = usbredir_iso_packet;
dev->parser->interrupt_packet_func = usbredir_interrupt_packet;
+ dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet;
dev->read_buf = NULL;
dev->read_buf_size = 0;
@@ -963,6 +1139,7 @@ static void usbredir_create_parser(USBRedirDevice *dev)
usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size);
usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids);
usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length);
+ usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving);
if (runstate_check(RUN_STATE_INMIGRATE)) {
flags |= usbredirparser_fl_no_hello;
@@ -1214,6 +1391,67 @@ error:
return -1;
}
+static bool usbredir_id_match(USBRedirDevice *dev, int interface,
+ const struct usb_device_id *ids)
+{
+ int i;
+
+ for (i = 0; ids[i].vendor_id != -1; i++) {
+ if (ids[i].vendor_id == dev->device_info.vendor_id &&
+ ids[i].product_id == dev->device_info.product_id &&
+ (ids[i].interface_class == -1 ||
+ (ids[i].interface_class ==
+ dev->interface_info.interface_class[interface] &&
+ ids[i].interface_subclass ==
+ dev->interface_info.interface_subclass[interface] &&
+ ids[i].interface_protocol ==
+ dev->interface_info.interface_protocol[interface]))) {
+ return true;
+ }
+ }
+ return false;
+}
+
+static void usbredir_check_bulk_receiving(USBRedirDevice *dev)
+{
+ int i, j;
+
+ if (!usbredirparser_peer_has_cap(dev->parser,
+ usb_redir_cap_bulk_receiving)) {
+ return;
+ }
+
+ for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) {
+ dev->endpoint[i].bulk_receiving_enabled = 0;
+ }
+ for (i = 0; i < dev->interface_info.interface_count; i++) {
+ if (usbredir_id_match(dev, i, usbredir_raw_serial_ids)) {
+ dev->buffered_bulk_in_complete =
+ usbredir_buffered_bulk_in_complete_raw;
+ } else if (usbredir_id_match(dev, i, usbredir_ftdi_serial_ids)) {
+ dev->buffered_bulk_in_complete =
+ usbredir_buffered_bulk_in_complete_ftdi;
+ } else {
+ continue;
+ }
+
+ for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) {
+ if (dev->endpoint[j].interface ==
+ dev->interface_info.interface[i] &&
+ dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK &&
+ dev->endpoint[j].max_packet_size != 0) {
+ dev->endpoint[j].bulk_receiving_enabled = 1;
+ /*
+ * With buffering pipelining is not necessary. Also packet
+ * combining and bulk in buffering don't play nice together!
+ */
+ I2USBEP(dev, j)->pipeline = false;
+ break; /* Only buffer for the first ep of each intf */
+ }
+ }
+ }
+}
+
/*
* usbredirparser packet complete callbacks
*/
@@ -1322,6 +1560,7 @@ static void usbredir_device_connect(void *priv,
return;
}
+ usbredir_check_bulk_receiving(dev);
qemu_mod_timer(dev->attach_timer, dev->next_attach_time);
}
@@ -1360,9 +1599,10 @@ static void usbredir_interface_info(void *priv,
/*
* If we receive interface info after the device has already been
- * connected (ie on a set_config), re-check the filter.
+ * connected (ie on a set_config), re-check interface dependent things.
*/
if (qemu_timer_pending(dev->attach_timer) || dev->dev.attached) {
+ usbredir_check_bulk_receiving(dev);
if (usbredir_check_filter(dev)) {
ERROR("Device no longer matches filter after interface info "
"change, disconnecting!\n");
@@ -1463,6 +1703,7 @@ static void usbredir_ep_info(void *priv,
return;
}
usbredir_setup_usb_eps(dev);
+ usbredir_check_bulk_receiving(dev);
}
static void usbredir_configuration_status(void *priv, uint64_t id,
@@ -1553,6 +1794,25 @@ static void usbredir_bulk_streams_status(void *priv,
uint64_t id,
{
}
+static void usbredir_bulk_receiving_status(void *priv, uint64_t id,
+ struct usb_redir_bulk_receiving_status_header *bulk_receiving_status)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t ep = bulk_receiving_status->endpoint;
+
+ DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n",
+ bulk_receiving_status->status, ep, id);
+
+ if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started)
{
+ return;
+ }
+
+ if (bulk_receiving_status->status == usb_redir_stall) {
+ DPRINTF("bulk receiving stopped by peer ep %02X\n", ep);
+ dev->endpoint[EP2I(ep)].bulk_receiving_started = 0;
+ }
+}
+
static void usbredir_control_packet(void *priv, uint64_t id,
struct usb_redir_control_packet_header *control_packet,
uint8_t *data, int data_len)
@@ -1658,7 +1918,7 @@ static void usbredir_iso_packet(void *priv, uint64_t id,
}
/* bufp_alloc also adds the packet to the ep queue */
- bufp_alloc(dev, data, data_len, iso_packet->status, ep);
+ bufp_alloc(dev, data, data_len, iso_packet->status, ep, data);
}
static void usbredir_interrupt_packet(void *priv, uint64_t id,
@@ -1689,7 +1949,7 @@ static void usbredir_interrupt_packet(void *priv,
uint64_t id,
}
/* bufp_alloc also adds the packet to the ep queue */
- bufp_alloc(dev, data, data_len, interrupt_packet->status, ep);
+ bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data);
} else {
/*
* We report output interrupt packets as completed directly upon
@@ -1702,6 +1962,52 @@ static void usbredir_interrupt_packet(void *priv,
uint64_t id,
}
}
+static void usbredir_buffered_bulk_packet(void *priv, uint64_t id,
+ struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet,
+ uint8_t *data, int data_len)
+{
+ USBRedirDevice *dev = priv;
+ uint8_t status, ep = buffered_bulk_packet->endpoint;
+ void *free_on_destroy;
+ int i, len;
+
+ DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n",
+ buffered_bulk_packet->status, ep, data_len, id);
+
+ if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) {
+ ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) {
+ DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep);
+ free(data);
+ return;
+ }
+
+ /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */
+ len = dev->endpoint[EP2I(ep)].max_packet_size;
+ status = usb_redir_success;
+ free_on_destroy = NULL;
+ for (i = 0; i < data_len; i += len) {
+ if (len >= (data_len - i)) {
+ len = data_len - i;
+ status = buffered_bulk_packet->status;
+ free_on_destroy = data;
+ }
+ /* bufp_alloc also adds the packet to the ep queue */
+ bufp_alloc(dev, data + i, len, status, ep, free_on_destroy);
+ }
+
+ if (dev->endpoint[EP2I(ep)].pending_async_packet) {
+ USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet;
+ dev->endpoint[EP2I(ep)].pending_async_packet = NULL;
+ usbredir_buffered_bulk_in_complete(dev, p, ep);
+ usb_packet_complete(&dev->dev, p);
+ }
+}
+
/*
* Migration code
*/
@@ -1736,6 +2042,7 @@ static int usbredir_post_load(void *priv, int version_id)
dev->dev.speedmask = (1 << dev->dev.speed);
usbredir_setup_usb_eps(dev);
+ usbredir_check_bulk_receiving(dev);
return 0;
}
@@ -1809,15 +2116,16 @@ static void usbredir_put_bufpq(QEMUFile *f, void *priv,
size_t unused)
struct endp_data *endp = priv;
USBRedirDevice *dev = endp->dev;
struct buf_packet *bufp;
- int i = 0;
+ int len, i = 0;
qemu_put_be32(f, endp->bufpq_size);
QTAILQ_FOREACH(bufp, &endp->bufpq, next) {
+ len = bufp->len - bufp->offset;
DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size,
- bufp->len, bufp->status);
- qemu_put_be32(f, bufp->len);
+ len, bufp->status);
+ qemu_put_be32(f, len);
qemu_put_be32(f, bufp->status);
- qemu_put_buffer(f, bufp->data, bufp->len);
+ qemu_put_buffer(f, bufp->data + bufp->offset, len);
i++;
}
assert(i == endp->bufpq_size);
@@ -1835,7 +2143,9 @@ static int usbredir_get_bufpq(QEMUFile *f, void *priv,
size_t unused)
bufp = g_malloc(sizeof(struct buf_packet));
bufp->len = qemu_get_be32(f);
bufp->status = qemu_get_be32(f);
+ bufp->offset = 0;
bufp->data = qemu_oom_check(malloc(bufp->len)); /* regular malloc! */
+ bufp->free_on_destroy = bufp->data;
qemu_get_buffer(f, bufp->data, bufp->len);
QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next);
DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size,
@@ -1852,6 +2162,23 @@ static const VMStateInfo usbredir_ep_bufpq_vmstate_info
= {
/* For endp_data migration */
+static const VMStateDescription usbredir_bulk_receiving_vmstate = {
+ .name = "usb-redir-ep/bulk-receiving",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(bulk_receiving_started, struct endp_data),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static bool usbredir_bulk_receiving_needed(void *priv)
+{
+ struct endp_data *endp = priv;
+
+ return endp->bulk_receiving_started;
+}
+
static const VMStateDescription usbredir_ep_vmstate = {
.name = "usb-redir-ep",
.version_id = 1,
@@ -1878,6 +2205,14 @@ static const VMStateDescription usbredir_ep_vmstate = {
},
VMSTATE_INT32(bufpq_target_size, struct endp_data),
VMSTATE_END_OF_LIST()
+ },
+ .subsections = (VMStateSubsection[]) {
+ {
+ .vmsd = &usbredir_bulk_receiving_vmstate,
+ .needed = usbredir_bulk_receiving_needed,
+ }, {
+ /* empty */
+ }
}
};
--
1.8.0.1
- [Qemu-devel] [PATCH 13/26] uhci: Fix pending interrupts getting lost on migration, (continued)
- [Qemu-devel] [PATCH 13/26] uhci: Fix pending interrupts getting lost on migration, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 14/26] uhci: Add a QH_VALID define, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 17/26] hid: Change idle handling to use a timer, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 15/26] uhci: Limit amount of frames processed in one go, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 20/26] usbredir: Add an usbredir_stop_ep helper function, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 19/26] usb: Add an usb_device_ep_stopped USBDevice method, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 16/26] uhci: Maximize how many frames we catch up when behind, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 21/26] usbredir: Add USBEP2I and I2USBEP helper macros, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 22/26] usbredir: Add ep_stopped USBDevice method, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 23/26] usbredir: Verify we have 32 bits bulk length cap when redirecting to xhci, Hans de Goede, 2012/12/14
- [Qemu-devel] [PATCH 26/26] usbredir: Add support for buffered bulk input,
Hans de Goede <=
[Qemu-devel] [PATCH 24/26] usbredir: Add usbredir_init_endpoints() helper, Hans de Goede, 2012/12/14
[Qemu-devel] [PATCH 25/26] usb-redir: Add debugging to bufpq save / restore, Hans de Goede, 2012/12/14
[Qemu-devel] [PATCH 18/26] usb: Fix usb_ep_find_packet_by_id, Hans de Goede, 2012/12/14