Re: [Qemu-devel] [PATCH 1/1] tmp105: Create API for TMP105 temperature sensor.

[Anthony Liguori]

Alex Horn <address@hidden> writes:

> * Define enum for TMP105 registers
> * Move tmp105_set() from I2C to TMP105 header
> * Document units and range of temperature as preconditions
>
> Signed-off-by: Alex Horn <address@hidden>

Applied. Thanks.

Regards,

Anthony Liguori

> ---
>  hw/i2c.h    |    3 --
>  hw/tmp105.c |   17 ++++++++-------
>  hw/tmp105.h |   67 
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 76 insertions(+), 11 deletions(-)
>  create mode 100644 hw/tmp105.h
>
> diff --git a/hw/i2c.h b/hw/i2c.h
> index 0f5682b..883b5c5 100644
> --- a/hw/i2c.h
> +++ b/hw/i2c.h
> @@ -73,9 +73,6 @@ void *wm8750_dac_buffer(void *opaque, int samples);
>  void wm8750_dac_commit(void *opaque);
>  void wm8750_set_bclk_in(void *opaque, int new_hz);
>  
> -/* tmp105.c */
> -void tmp105_set(I2CSlave *i2c, int temp);
> -
>  /* lm832x.c */
>  void lm832x_key_event(DeviceState *dev, int key, int state);
>  
> diff --git a/hw/tmp105.c b/hw/tmp105.c
> index 8e8dbd9..9c67e64 100644
> --- a/hw/tmp105.c
> +++ b/hw/tmp105.c
> @@ -20,6 +20,7 @@
>  
>  #include "hw.h"
>  #include "i2c.h"
> +#include "tmp105.h"
>  
>  typedef struct {
>      I2CSlave i2c;
> @@ -92,22 +93,22 @@ static void tmp105_read(TMP105State *s)
>      }
>  
>      switch (s->pointer & 3) {
> -    case 0:  /* Temperature */
> +    case TMP105_REG_TEMPERATURE:
>          s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8);
>          s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) &
>                  (0xf0 << ((~s->config >> 5) & 3));           /* R */
>          break;
>  
> -    case 1:  /* Configuration */
> +    case TMP105_REG_CONFIG:
>          s->buf[s->len ++] = s->config;
>          break;
>  
> -    case 2:  /* T_LOW */
> +    case TMP105_REG_T_LOW:
>          s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8;
>          s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0;
>          break;
>  
> -    case 3:  /* T_HIGH */
> +    case TMP105_REG_T_HIGH:
>          s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8;
>          s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0;
>          break;
> @@ -117,10 +118,10 @@ static void tmp105_read(TMP105State *s)
>  static void tmp105_write(TMP105State *s)
>  {
>      switch (s->pointer & 3) {
> -    case 0:  /* Temperature */
> +    case TMP105_REG_TEMPERATURE:
>          break;
>  
> -    case 1:  /* Configuration */
> +    case TMP105_REG_CONFIG:
>          if (s->buf[0] & ~s->config & (1 << 0))                       /* SD */
>              printf("%s: TMP105 shutdown\n", __FUNCTION__);
>          s->config = s->buf[0];
> @@ -128,8 +129,8 @@ static void tmp105_write(TMP105State *s)
>          tmp105_alarm_update(s);
>          break;
>  
> -    case 2:  /* T_LOW */
> -    case 3:  /* T_HIGH */
> +    case TMP105_REG_T_LOW:
> +    case TMP105_REG_T_HIGH:
>          if (s->len >= 3)
>              s->limit[s->pointer & 1] = (int16_t)
>                      ((((uint16_t) s->buf[0]) << 8) | s->buf[1]);
> diff --git a/hw/tmp105.h b/hw/tmp105.h
> new file mode 100644
> index 0000000..51eff4b
> --- /dev/null
> +++ b/hw/tmp105.h
> @@ -0,0 +1,67 @@
> +/*
> + * Texas Instruments TMP105 Temperature Sensor
> + *
> + * Browse the data sheet:
> + *
> + *    http://www.ti.com/lit/gpn/tmp105
> + *
> + * Copyright (C) 2012 Alex Horn <address@hidden>
> + * Copyright (C) 2008-2012 Andrzej Zaborowski <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * later. See the COPYING file in the top-level directory.
> + */
> +#ifndef QEMU_TMP105_H
> +#define QEMU_TMP105_H
> +
> +#include "i2c.h"
> +
> +/**
> + * TMP105Reg:
> + * @TMP105_REG_TEMPERATURE: Temperature register
> + * @TMP105_REG_CONFIG: Configuration register
> + * @TMP105_REG_T_LOW: Low temperature register (also known as T_hyst)
> + * @TMP105_REG_T_HIGH: High temperature register (also known as T_OS)
> + *
> + * The following temperature sensors are
> + * compatible with the TMP105 registers:
> + * - adt75
> + * - ds1775
> + * - ds75
> + * - lm75
> + * - lm75a
> + * - max6625
> + * - max6626
> + * - mcp980x
> + * - stds75
> + * - tcn75
> + * - tmp100
> + * - tmp101
> + * - tmp105
> + * - tmp175
> + * - tmp275
> + * - tmp75
> + **/
> +typedef enum TMP105Reg {
> +    TMP105_REG_TEMPERATURE = 0,
> +    TMP105_REG_CONFIG,
> +    TMP105_REG_T_LOW,
> +    TMP105_REG_T_HIGH,
> +} TMP105Reg;
> +
> +/**
> + * tmp105_set:
> + * @i2c: dispatcher to TMP105 hardware model
> + * @temp: temperature with 0.001 centigrades units in the range -40 C to 
> +125 C
> + *
> + * Sets the temperature of the TMP105 hardware model.
> + *
> + * Bits 5 and 6 (value 32 and 64) in the register indexed by 
> TMP105_REG_CONFIG
> + * determine the precision of the temperature. See Table 8 in the data sheet.
> + *
> + * @see_also: I2C_SLAVE macro
> + * @see_also: http://www.ti.com/lit/gpn/tmp105
> + */
> +void tmp105_set(I2CSlave *i2c, int temp);
> +
> +#endif
> -- 
> 1.7.6.5