[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 0/7] I2C libqos and tmp105 qtest support
From: |
Andreas Färber |
Subject: |
Re: [Qemu-devel] [PATCH v2 0/7] I2C libqos and tmp105 qtest support |
Date: |
Sun, 06 Jan 2013 22:07:21 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/17.0 Thunderbird/17.0 |
Am 14.12.2012 12:34, schrieb Andreas Färber:
> Hello,
>
> Here's I2C support for the libqos framework and an OMAP driver.
> The design was inspired by QEMU's i2c_bus and Linux' i2c_adapter.
> Seems like low hanging fruit (while we're still waiting for PCI support :)),
> hopefully motivating more people to contribute qtests for new devices or
> bug fixes.
Ping! See below...
> I found a bug in omap_i2c related to the SBD bit not getting cleared after
> a single-byte read; the patch has been dropped as we were not able to verify
> it against a TRM or hardware. The driver was therefore changed to ignore the
> SBD bit, like the Linux driver does.
>
> I've split up the proposed tmp105.h header further to facilitate reuse of
> the register enum in qtest.
>
> The test case itself initially fails; in lack of a v2 patch by Alex I'm
> appending my own fix proposal that makes the test pass.
>
> I'm also appending a QOM'ish cleanup of the file, replacing the current API
> with a QOM property.
> To do a qom-set for testing a non-zero temperature reading, we'll need either
> a canonical path for the TMP105 or Jason's qtest_qmp_resp() to iterate over
> qom-list /machine/unassigned output looking for type "tmp105" with qom-get.
[...]
> v1 -> v2:
> * Factor out libqos API for I2C and an OMAP driver
> * Avoid casts by using uint8_t* in API, suggested by Blue
> * Ignore SBD bit in omap_i2c driver
> * Drop omap_i2c patch clearing SBD
> * Incorporate Alex' tmp105.h patch
> * Split out tmp105_regs.h for qtest, inspired by rtc-test
> * Append replacement for Alex' fix
> * Append QOM cleanup and turn setter function into QOM property
[...]
> Alex Horn (1):
> tmp105: Create API for TMP105 temperature sensor
This was applied by Anthony meanwhile.
> Andreas Färber (6):
> libqtest: Prepare I2C libqos
> tmp105: Split out I2C message constants from header
> tests: Add tmp105 qtest test case
> tmp105: Fix I2C protocol bug
> tmp105: QOM'ify
> tmp105: Add temperature QOM property
These need to be rebased due to the header reorganization and gcov.
Anyone any feedback, especially on the libqos part? Anthony? Stefan?
Thanks,
Andreas
> hw/i2c.h | 3 -
> hw/tmp105.c | 101 ++++++++++++++++++-------------
> hw/tmp105.h | 47 +++++++++++++++
> hw/tmp105_regs.h | 50 ++++++++++++++++
> tests/Makefile | 3 +
> tests/libi2c-omap.c | 166
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/libi2c.c | 22 +++++++
> tests/libi2c.h | 30 ++++++++++
> tests/tmp105-test.c | 76 +++++++++++++++++++++++
> 9 Dateien geändert, 453 Zeilen hinzugefügt(+), 45 Zeilen entfernt(-)
> create mode 100644 hw/tmp105.h
> create mode 100644 hw/tmp105_regs.h
> create mode 100644 tests/libi2c-omap.c
> create mode 100644 tests/libi2c.c
> create mode 100644 tests/libi2c.h
> create mode 100644 tests/tmp105-test.c
- Re: [Qemu-devel] [PATCH v2 0/7] I2C libqos and tmp105 qtest support,
Andreas Färber <=