qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v2 0/7] I2C libqos and tmp105 qtest support


From: Anthony Liguori
Subject: Re: [Qemu-devel] [PATCH v2 0/7] I2C libqos and tmp105 qtest support
Date: Mon, 07 Jan 2013 13:36:04 -0600
User-agent: Notmuch/0.13.2+93~ged93d79 (http://notmuchmail.org) Emacs/23.3.1 (x86_64-pc-linux-gnu)

Andreas Färber <address@hidden> writes:

> Hello,
>
> Here's I2C support for the libqos framework and an OMAP driver.
> The design was inspired by QEMU's i2c_bus and Linux' i2c_adapter.
> Seems like low hanging fruit (while we're still waiting for PCI support :)),
> hopefully motivating more people to contribute qtests for new devices or
> bug fixes.
>
> I found a bug in omap_i2c related to the SBD bit not getting cleared after
> a single-byte read; the patch has been dropped as we were not able to verify
> it against a TRM or hardware. The driver was therefore changed to ignore the
> SBD bit, like the Linux driver does.
>
> I've split up the proposed tmp105.h header further to facilitate reuse of
> the register enum in qtest.
>
> The test case itself initially fails; in lack of a v2 patch by Alex I'm
> appending my own fix proposal that makes the test pass.
>
> I'm also appending a QOM'ish cleanup of the file, replacing the current API
> with a QOM property.
> To do a qom-set for testing a non-zero temperature reading, we'll need either
> a canonical path for the TMP105 or Jason's qtest_qmp_resp() to iterate over
> qom-list /machine/unassigned output looking for type "tmp105" with qom-get.
>
> Alex, if you could add a Tested-by (using object_property_set_int()) that
> would be appreciated.

Looks good.  Whole series:

Reviewed-by: Anthony Liguori <address@hidden>

Regards,

Anthony Liguori

>
> Regards,
> Andreas
>
> v1 -> v2:
> * Factor out libqos API for I2C and an OMAP driver
> * Avoid casts by using uint8_t* in API, suggested by Blue
> * Ignore SBD bit in omap_i2c driver
> * Drop omap_i2c patch clearing SBD
> * Incorporate Alex' tmp105.h patch
> * Split out tmp105_regs.h for qtest, inspired by rtc-test
> * Append replacement for Alex' fix
> * Append QOM cleanup and turn setter function into QOM property
>
> Cc: Anthony Liguori <address@hidden>
> Cc: Alex Horn <address@hidden>
> Cc: Andrzej Zaborowski <address@hidden>
> Cc: Peter Maydell <address@hidden>
> Cc: Blue Swirl <address@hidden>
>
> Cc: Jason Baron <address@hidden>
> Cc: Paolo Bonzini <address@hidden>
>
> Alex Horn (1):
>   tmp105: Create API for TMP105 temperature sensor
>
> Andreas Färber (6):
>   libqtest: Prepare I2C libqos
>   tmp105: Split out I2C message constants from header
>   tests: Add tmp105 qtest test case
>   tmp105: Fix I2C protocol bug
>   tmp105: QOM'ify
>   tmp105: Add temperature QOM property
>
>  hw/i2c.h            |    3 -
>  hw/tmp105.c         |  101 ++++++++++++++++++-------------
>  hw/tmp105.h         |   47 +++++++++++++++
>  hw/tmp105_regs.h    |   50 ++++++++++++++++
>  tests/Makefile      |    3 +
>  tests/libi2c-omap.c |  166 
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/libi2c.c      |   22 +++++++
>  tests/libi2c.h      |   30 ++++++++++
>  tests/tmp105-test.c |   76 +++++++++++++++++++++++
>  9 Dateien geändert, 453 Zeilen hinzugefügt(+), 45 Zeilen entfernt(-)
>  create mode 100644 hw/tmp105.h
>  create mode 100644 hw/tmp105_regs.h
>  create mode 100644 tests/libi2c-omap.c
>  create mode 100644 tests/libi2c.c
>  create mode 100644 tests/libi2c.h
>  create mode 100644 tests/tmp105-test.c
>
> -- 
> 1.7.10.4



reply via email to

[Prev in Thread] Current Thread [Next in Thread]