[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCHv3 1/2] qemu-img: find the highest offset in use duri
From: |
Federico Simoncelli |
Subject: |
[Qemu-devel] [PATCHv3 1/2] qemu-img: find the highest offset in use during check |
Date: |
Mon, 21 Jan 2013 09:25:12 -0500 |
This patch adds the support for reporting the highest offset in use by
an image. This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the actual
amount of space in use.
Signed-off-by: Federico Simoncelli <address@hidden>
---
block/qcow2-refcount.c | 10 ++++++++--
include/block/block.h | 1 +
qemu-img.c | 4 ++++
tests/qemu-iotests/026 | 6 +++---
tests/qemu-iotests/036 | 3 ++-
tests/qemu-iotests/039 | 2 +-
tests/qemu-iotests/044.out | 1 +
tests/qemu-iotests/common.rc | 5 +++--
8 files changed, 23 insertions(+), 9 deletions(-)
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index 6a95aa6..3444f85 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -1116,7 +1116,7 @@ int qcow2_check_refcounts(BlockDriverState *bs,
BdrvCheckResult *res,
BdrvCheckMode fix)
{
BDRVQcowState *s = bs->opaque;
- int64_t size, i;
+ int64_t size, i, highest_cluster;
int nb_clusters, refcount1, refcount2;
QCowSnapshot *sn;
uint16_t *refcount_table;
@@ -1154,7 +1154,7 @@ int qcow2_check_refcounts(BlockDriverState *bs,
BdrvCheckResult *res,
s->refcount_table_offset,
s->refcount_table_size * sizeof(uint64_t));
- for(i = 0; i < s->refcount_table_size; i++) {
+ for(i = 0, highest_cluster = 0; i < s->refcount_table_size; i++) {
uint64_t offset, cluster;
offset = s->refcount_table[i];
cluster = offset >> s->cluster_bits;
@@ -1197,6 +1197,11 @@ int qcow2_check_refcounts(BlockDriverState *bs,
BdrvCheckResult *res,
}
refcount2 = refcount_table[i];
+
+ if (refcount1 > 0 || refcount2 > 0) {
+ highest_cluster = i;
+ }
+
if (refcount1 != refcount2) {
/* Check if we're allowed to fix the mismatch */
@@ -1231,6 +1236,7 @@ int qcow2_check_refcounts(BlockDriverState *bs,
BdrvCheckResult *res,
}
}
+ res->highest_offset = (highest_cluster + 1) * s->cluster_size;
ret = 0;
fail:
diff --git a/include/block/block.h b/include/block/block.h
index ffd1936..b5cf6ac 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -213,6 +213,7 @@ typedef struct BdrvCheckResult {
int check_errors;
int corruptions_fixed;
int leaks_fixed;
+ int64_t highest_offset;
BlockFragInfo bfi;
} BdrvCheckResult;
diff --git a/qemu-img.c b/qemu-img.c
index 85d3740..7b977cd 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -475,6 +475,10 @@ static int img_check(int argc, char **argv)
result.bfi.fragmented_clusters * 100.0 /
result.bfi.allocated_clusters);
}
+ if (result.highest_offset > 0) {
+ printf("Highest offset in use: %" PRId64 "\n", result.highest_offset);
+ }
+
bdrv_delete(bs);
if (ret < 0 || result.check_errors) {
diff --git a/tests/qemu-iotests/026 b/tests/qemu-iotests/026
index 1602ccd..107a3ff 100755
--- a/tests/qemu-iotests/026
+++ b/tests/qemu-iotests/026
@@ -102,7 +102,7 @@ if [ "$event" == "l2_load" ]; then
$QEMU_IO -c "read $vmstate 0 128k " $BLKDBG_TEST_IMG | _filter_qemu_io
fi
-$QEMU_IMG check $TEST_IMG 2>&1 | grep -v "refcount=1 reference=0"
+_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
@@ -147,7 +147,7 @@ echo
echo "Event: $event; errno: $errno; imm: $imm; once: $once; write $vmstate"
$QEMU_IO -c "write $vmstate 0 64M" $BLKDBG_TEST_IMG | _filter_qemu_io
-$QEMU_IMG check $TEST_IMG 2>&1 | grep -v "refcount=1 reference=0"
+_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
@@ -186,7 +186,7 @@ echo
echo "Event: $event; errno: $errno; imm: $imm; once: $once"
$QEMU_IO -c "write -b 0 64k" $BLKDBG_TEST_IMG | _filter_qemu_io
-$QEMU_IMG check $TEST_IMG 2>&1 | grep -v "refcount=1 reference=0"
+_check_test_img 2>&1 | grep -v "refcount=1 reference=0"
done
done
diff --git a/tests/qemu-iotests/036 b/tests/qemu-iotests/036
index 329533e..4dbfc57 100755
--- a/tests/qemu-iotests/036
+++ b/tests/qemu-iotests/036
@@ -59,7 +59,8 @@ _make_test_img 64M
echo
echo === Repair image ===
echo
-$QEMU_IMG check -r all $TEST_IMG
+_check_test_img -r all
+
./qcow2.py $TEST_IMG dump-header
# success, all done
diff --git a/tests/qemu-iotests/039 b/tests/qemu-iotests/039
index c5ae806..ae35175 100755
--- a/tests/qemu-iotests/039
+++ b/tests/qemu-iotests/039
@@ -86,7 +86,7 @@ $QEMU_IO -r -c "read -P 0x5a 0 512" $TEST_IMG |
_filter_qemu_io
echo
echo "== Repairing the image file must succeed =="
-$QEMU_IMG check -r all $TEST_IMG
+_check_test_img -r all
# The dirty bit must not be set
./qcow2.py $TEST_IMG dump-header | grep incompatible_features
diff --git a/tests/qemu-iotests/044.out b/tests/qemu-iotests/044.out
index 7a40071..6851878 100644
--- a/tests/qemu-iotests/044.out
+++ b/tests/qemu-iotests/044.out
@@ -1,4 +1,5 @@
No errors were found on the image.
+Highest offset in use: 4296447488
.
----------------------------------------------------------------------
Ran 1 tests
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index aef5f52..22c0186 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -161,9 +161,10 @@ _cleanup_test_img()
_check_test_img()
{
- $QEMU_IMG check -f $IMGFMT $TEST_IMG 2>&1 | \
+ $QEMU_IMG check "$@" -f $IMGFMT $TEST_IMG 2>&1 | \
grep -v "fragmented$" | \
- sed -e 's/qemu-img\: This image format does not support checks/No
errors were found on the image./'
+ sed -e 's/qemu-img\: This image format does not support checks/No
errors were found on the image./' | \
+ sed -e '/Highest offset in use: [0-9]\+/d'
}
_img_info()
--
1.7.1