[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v11 2/4] qemu-img: Add "Quiet mode" option
|
From: |
Miroslav Rezanina |
|
Subject: |
[Qemu-devel] [PATCH v11 2/4] qemu-img: Add "Quiet mode" option |
|
Date: |
Wed, 13 Feb 2013 09:09:40 +0100 |
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.
Signed-off-by: Miroslav Rezanina <address@hidden>
---
block.c | 12 ++--
blockdev.c | 6 +-
include/block/block.h | 3 +-
qemu-img-cmds.hx | 28 +++++-----
qemu-img.c | 151 ++++++++++++++++++++++++++++++++++---------------
qemu-img.texi | 3 +
6 files changed, 134 insertions(+), 69 deletions(-)
diff --git a/block.c b/block.c
index 08039d2..a4d7125 100644
--- a/block.c
+++ b/block.c
@@ -4470,7 +4470,8 @@ bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie
*cookie)
void bdrv_img_create(const char *filename, const char *fmt,
const char *base_filename, const char *base_fmt,
- char *options, uint64_t img_size, int flags, Error **errp)
+ char *options, uint64_t img_size, int flags,
+ Error **errp, bool quiet)
{
QEMUOptionParameter *param = NULL, *create_options = NULL;
QEMUOptionParameter *backing_fmt, *backing_file, *size;
@@ -4579,10 +4580,11 @@ void bdrv_img_create(const char *filename, const char
*fmt,
}
}
- printf("Formatting '%s', fmt=%s ", filename, fmt);
- print_option_parameters(param);
- puts("");
-
+ if (!quiet) {
+ printf("Formatting '%s', fmt=%s ", filename, fmt);
+ print_option_parameters(param);
+ puts("");
+ }
ret = bdrv_create(drv, filename, param);
if (ret < 0) {
if (ret == -ENOTSUP) {
diff --git a/blockdev.c b/blockdev.c
index 63e6f1e..3859ac2 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -791,7 +791,7 @@ void qmp_transaction(BlockdevActionList *dev_list, Error
**errp)
bdrv_img_create(new_image_file, format,
states->old_bs->filename,
states->old_bs->drv->format_name,
- NULL, -1, flags, &local_err);
+ NULL, -1, flags, &local_err, false);
if (error_is_set(&local_err)) {
error_propagate(errp, local_err);
goto delete_and_fail;
@@ -1284,7 +1284,7 @@ void qmp_drive_mirror(const char *device, const char
*target,
/* create new image w/o backing file */
assert(format && drv);
bdrv_img_create(target, format,
- NULL, NULL, NULL, size, flags, &local_err);
+ NULL, NULL, NULL, size, flags, &local_err, false);
} else {
switch (mode) {
case NEW_IMAGE_MODE_EXISTING:
@@ -1295,7 +1295,7 @@ void qmp_drive_mirror(const char *device, const char
*target,
bdrv_img_create(target, format,
source->filename,
source->drv->format_name,
- NULL, size, flags, &local_err);
+ NULL, size, flags, &local_err, false);
break;
default:
abort();
diff --git a/include/block/block.h b/include/block/block.h
index 8309fc1..371b42f 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -352,7 +352,8 @@ int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
void bdrv_img_create(const char *filename, const char *fmt,
const char *base_filename, const char *base_fmt,
- char *options, uint64_t img_size, int flags, Error
**errp);
+ char *options, uint64_t img_size, int flags,
+ Error **errp, bool quiet);
void bdrv_set_buffer_alignment(BlockDriverState *bs, int align);
void *qemu_blockalign(BlockDriverState *bs, size_t size);
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index 259fc14..9283776 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -10,27 +10,27 @@ STEXI
ETEXI
DEF("check", img_check,
- "check [-f fmt] [--output=ofmt] [-r [leaks | all]] filename")
+ "check [-q] [-f fmt] [--output=ofmt] [-r [leaks | all]] filename")
STEXI
address@hidden check [-f @var{fmt}] address@hidden [-r [leaks | all]]
@var{filename}
address@hidden check [-q] [-f @var{fmt}] address@hidden [-r [leaks | all]]
@var{filename}
ETEXI
DEF("create", img_create,
- "create [-f fmt] [-o options] filename [size]")
+ "create [-q] [-f fmt] [-o options] filename [size]")
STEXI
address@hidden create [-f @var{fmt}] [-o @var{options}] @var{filename}
address@hidden
address@hidden create [-q] [-f @var{fmt}] [-o @var{options}] @var{filename}
address@hidden
ETEXI
DEF("commit", img_commit,
- "commit [-f fmt] [-t cache] filename")
+ "commit [-q] [-f fmt] [-t cache] filename")
STEXI
address@hidden commit [-f @var{fmt}] [-t @var{cache}] @var{filename}
address@hidden commit [-q] [-f @var{fmt}] [-t @var{cache}] @var{filename}
ETEXI
DEF("convert", img_convert,
- "convert [-c] [-p] [-f fmt] [-t cache] [-O output_fmt] [-o options] [-s
snapshot_name] [-S sparse_size] filename [filename2 [...]] output_filename")
+ "convert [-c] [-p] [-q] [-f fmt] [-t cache] [-O output_fmt] [-o options]
[-s snapshot_name] [-S sparse_size] filename [filename2 [...]] output_filename")
STEXI
address@hidden convert [-c] [-p] [-f @var{fmt}] [-t @var{cache}] [-O
@var{output_fmt}] [-o @var{options}] [-s @var{snapshot_name}] [-S
@var{sparse_size}] @var{filename} address@hidden [...]] @var{output_filename}
address@hidden convert [-c] [-p] [-q] [-f @var{fmt}] [-t @var{cache}] [-O
@var{output_fmt}] [-o @var{options}] [-s @var{snapshot_name}] [-S
@var{sparse_size}] @var{filename} address@hidden [...]] @var{output_filename}
ETEXI
DEF("info", img_info,
@@ -40,20 +40,20 @@ STEXI
ETEXI
DEF("snapshot", img_snapshot,
- "snapshot [-l | -a snapshot | -c snapshot | -d snapshot] filename")
+ "snapshot [-q] [-l | -a snapshot | -c snapshot | -d snapshot] filename")
STEXI
address@hidden snapshot [-l | -a @var{snapshot} | -c @var{snapshot} | -d
@var{snapshot}] @var{filename}
address@hidden snapshot [-q] [-l | -a @var{snapshot} | -c @var{snapshot} | -d
@var{snapshot}] @var{filename}
ETEXI
DEF("rebase", img_rebase,
- "rebase [-f fmt] [-t cache] [-p] [-u] -b backing_file [-F backing_fmt]
filename")
+ "rebase [-q] [-f fmt] [-t cache] [-p] [-u] -b backing_file [-F
backing_fmt] filename")
STEXI
address@hidden rebase [-f @var{fmt}] [-t @var{cache}] [-p] [-u] -b
@var{backing_file} [-F @var{backing_fmt}] @var{filename}
address@hidden rebase [-q] [-f @var{fmt}] [-t @var{cache}] [-p] [-u] -b
@var{backing_file} [-F @var{backing_fmt}] @var{filename}
ETEXI
DEF("resize", img_resize,
- "resize filename [+ | -]size")
+ "resize [-q] filename [+ | -]size")
STEXI
address@hidden resize @var{filename} [+ | address@hidden
address@hidden resize [-q] @var{filename} [+ | address@hidden
@end table
ETEXI
diff --git a/qemu-img.c b/qemu-img.c
index 34249fe..a2a2044 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -32,6 +32,7 @@
#include "block/block_int.h"
#include <getopt.h>
#include <stdio.h>
+#include <stdarg.h>
#ifdef _WIN32
#include <windows.h>
@@ -96,6 +97,7 @@ static void help(void)
" rebasing in this case (useful for renaming the backing
file)\n"
" '-h' with or without a command shows this help and lists the
supported formats\n"
" '-p' show progress of command (only certain commands)\n"
+ " '-q' use Quiet mode - do not print any output (except errors)\n"
" '-S' indicates the consecutive number of bytes that must contain
only zeros\n"
" for qemu-img to create a sparse image during conversion\n"
" '--output' takes the format in which the output must be done
(human or json)\n"
@@ -119,6 +121,18 @@ static void help(void)
exit(1);
}
+static int qprintf(bool quiet, const char *fmt, ...)
+{
+ int ret = 0;
+ if (!quiet) {
+ va_list args;
+ va_start(args, fmt);
+ ret = vprintf(fmt, args);
+ va_end(args);
+ }
+ return ret;
+}
+
#if defined(WIN32)
/* XXX: put correct support for win32 */
static int read_password(char *buf, int buf_size)
@@ -237,7 +251,8 @@ static int print_block_option_help(const char *filename,
const char *fmt)
static BlockDriverState *bdrv_new_open(const char *filename,
const char *fmt,
int flags,
- bool require_io)
+ bool require_io,
+ bool quiet)
{
BlockDriverState *bs;
BlockDriver *drv;
@@ -263,7 +278,7 @@ static BlockDriverState *bdrv_new_open(const char *filename,
}
if (bdrv_is_encrypted(bs) && require_io) {
- printf("Disk image '%s' is encrypted.\n", filename);
+ qprintf(quiet, "Disk image '%s' is encrypted.\n", filename);
if (read_password(password, sizeof(password)) < 0) {
error_report("No password given");
goto fail;
@@ -312,9 +327,10 @@ static int img_create(int argc, char **argv)
const char *base_filename = NULL;
char *options = NULL;
Error *local_err = NULL;
+ bool quiet = false;
for(;;) {
- c = getopt(argc, argv, "F:b:f:he6o:");
+ c = getopt(argc, argv, "F:b:f:he6o:q");
if (c == -1) {
break;
}
@@ -343,6 +359,9 @@ static int img_create(int argc, char **argv)
case 'o':
options = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
@@ -375,7 +394,7 @@ static int img_create(int argc, char **argv)
}
bdrv_img_create(filename, fmt, base_filename, base_fmt,
- options, img_size, BDRV_O_FLAGS, &local_err);
+ options, img_size, BDRV_O_FLAGS, &local_err, quiet);
if (error_is_set(&local_err)) {
error_report("%s", error_get_pretty(local_err));
error_free(local_err);
@@ -385,7 +404,7 @@ static int img_create(int argc, char **argv)
return 0;
}
-static void dump_json_image_check(ImageCheck *check)
+static void dump_json_image_check(ImageCheck *check, bool quiet)
{
Error *errp = NULL;
QString *str;
@@ -396,45 +415,51 @@ static void dump_json_image_check(ImageCheck *check)
obj = qmp_output_get_qobject(ov);
str = qobject_to_json_pretty(obj);
assert(str != NULL);
- printf("%s\n", qstring_get_str(str));
+ qprintf(quiet, "%s\n", qstring_get_str(str));
qobject_decref(obj);
qmp_output_visitor_cleanup(ov);
QDECREF(str);
}
-static void dump_human_image_check(ImageCheck *check)
+static void dump_human_image_check(ImageCheck *check, bool quiet)
{
if (!(check->corruptions || check->leaks || check->check_errors)) {
- printf("No errors were found on the image.\n");
+ qprintf(quiet, "No errors were found on the image.\n");
} else {
if (check->corruptions) {
- printf("\n%" PRId64 " errors were found on the image.\n"
- "Data may be corrupted, or further writes to the image "
- "may corrupt it.\n",
- check->corruptions);
+ qprintf(quiet, "\n%" PRId64 " errors were found on the image.\n"
+ "Data may be corrupted, or further writes to the image "
+ "may corrupt it.\n",
+ check->corruptions);
}
if (check->leaks) {
- printf("\n%" PRId64 " leaked clusters were found on the image.\n"
- "This means waste of disk space, but no harm to data.\n",
- check->leaks);
+ qprintf(quiet,
+ "\n%" PRId64 " leaked clusters were found on the image.\n"
+ "This means waste of disk space, but no harm to data.\n",
+ check->leaks);
}
if (check->check_errors) {
- printf("\n%" PRId64 " internal errors have occurred during the
check.\n",
- check->check_errors);
+ qprintf(quiet,
+ "\n%" PRId64
+ " internal errors have occurred during the check.\n",
+ check->check_errors);
}
}
if (check->total_clusters != 0 && check->allocated_clusters != 0) {
- printf("%" PRId64 "/%" PRId64 "= %0.2f%% allocated, %0.2f%%
fragmented\n",
- check->allocated_clusters, check->total_clusters,
- check->allocated_clusters * 100.0 / check->total_clusters,
- check->fragmented_clusters * 100.0 / check->allocated_clusters);
+ qprintf(quiet,
+ "%" PRId64 "/%" PRId64
+ "= %0.2f%% allocated, %0.2f%% fragmented\n",
+ check->allocated_clusters, check->total_clusters,
+ check->allocated_clusters * 100.0 / check->total_clusters,
+ check->fragmented_clusters * 100.0 /
check->allocated_clusters);
}
if (check->image_end_offset) {
- printf("Image end offset: %" PRId64 "\n", check->image_end_offset);
+ qprintf(quiet,
+ "Image end offset: %" PRId64 "\n", check->image_end_offset);
}
}
@@ -492,6 +517,7 @@ static int img_check(int argc, char **argv)
int fix = 0;
int flags = BDRV_O_FLAGS | BDRV_O_CHECK;
ImageCheck *check;
+ bool quiet = false;
fmt = NULL;
output = NULL;
@@ -504,7 +530,7 @@ static int img_check(int argc, char **argv)
{"output", required_argument, 0, OPTION_OUTPUT},
{0, 0, 0, 0}
};
- c = getopt_long(argc, argv, "f:hr:",
+ c = getopt_long(argc, argv, "f:hr:q",
long_options, &option_index);
if (c == -1) {
break;
@@ -531,6 +557,9 @@ static int img_check(int argc, char **argv)
case OPTION_OUTPUT:
output = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
if (optind >= argc) {
@@ -547,7 +576,7 @@ static int img_check(int argc, char **argv)
return 1;
}
- bs = bdrv_new_open(filename, fmt, flags, true);
+ bs = bdrv_new_open(filename, fmt, flags, true, quiet);
if (!bs) {
return 1;
}
@@ -570,12 +599,13 @@ static int img_check(int argc, char **argv)
corruptions_fixed = check->corruptions_fixed;
if (output_format == OFORMAT_HUMAN) {
- printf("The following inconsistencies were found and repaired:\n\n"
- " %" PRId64 " leaked clusters\n"
- " %" PRId64 " corruptions\n\n"
- "Double checking the fixed image now...\n",
- check->leaks_fixed,
- check->corruptions_fixed);
+ qprintf(quiet,
+ "The following inconsistencies were found and
repaired:\n\n"
+ " %" PRId64 " leaked clusters\n"
+ " %" PRId64 " corruptions\n\n"
+ "Double checking the fixed image now...\n",
+ check->leaks_fixed,
+ check->corruptions_fixed);
}
ret = collect_image_check(bs, check, filename, fmt, 0);
@@ -586,10 +616,10 @@ static int img_check(int argc, char **argv)
switch (output_format) {
case OFORMAT_HUMAN:
- dump_human_image_check(check);
+ dump_human_image_check(check, quiet);
break;
case OFORMAT_JSON:
- dump_json_image_check(check);
+ dump_json_image_check(check, quiet);
break;
}
@@ -618,11 +648,12 @@ static int img_commit(int argc, char **argv)
int c, ret, flags;
const char *filename, *fmt, *cache;
BlockDriverState *bs;
+ bool quiet = false;
fmt = NULL;
cache = BDRV_DEFAULT_CACHE;
for(;;) {
- c = getopt(argc, argv, "f:ht:");
+ c = getopt(argc, argv, "f:ht:q");
if (c == -1) {
break;
}
@@ -637,6 +668,9 @@ static int img_commit(int argc, char **argv)
case 't':
cache = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
if (optind >= argc) {
@@ -651,14 +685,14 @@ static int img_commit(int argc, char **argv)
return -1;
}
- bs = bdrv_new_open(filename, fmt, flags, true);
+ bs = bdrv_new_open(filename, fmt, flags, true, quiet);
if (!bs) {
return 1;
}
ret = bdrv_commit(bs);
switch(ret) {
case 0:
- printf("Image committed.\n");
+ qprintf(quiet, "Image committed.\n");
break;
case -ENOENT:
error_report("No disk inserted");
@@ -801,6 +835,7 @@ static int img_convert(int argc, char **argv)
const char *snapshot_name = NULL;
float local_progress = 0;
int min_sparse = 8; /* Need at least 4k of zeros for sparse detection */
+ bool quiet = false;
fmt = NULL;
out_fmt = "raw";
@@ -808,7 +843,7 @@ static int img_convert(int argc, char **argv)
out_baseimg = NULL;
compress = 0;
for(;;) {
- c = getopt(argc, argv, "f:O:B:s:hce6o:pS:t:");
+ c = getopt(argc, argv, "f:O:B:s:hce6o:pS:t:q");
if (c == -1) {
break;
}
@@ -862,9 +897,16 @@ static int img_convert(int argc, char **argv)
case 't':
cache = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
+ if (quiet) {
+ progress = 0;
+ }
+
bs_n = argc - optind - 1;
if (bs_n < 1) {
help();
@@ -893,7 +935,8 @@ static int img_convert(int argc, char **argv)
total_sectors = 0;
for (bs_i = 0; bs_i < bs_n; bs_i++) {
- bs[bs_i] = bdrv_new_open(argv[optind + bs_i], fmt, BDRV_O_FLAGS, true);
+ bs[bs_i] = bdrv_new_open(argv[optind + bs_i], fmt, BDRV_O_FLAGS, true,
+ quiet);
if (!bs[bs_i]) {
error_report("Could not open '%s'", argv[optind + bs_i]);
ret = -1;
@@ -1012,7 +1055,7 @@ static int img_convert(int argc, char **argv)
return -1;
}
- out_bs = bdrv_new_open(out_filename, out_fmt, flags, true);
+ out_bs = bdrv_new_open(out_filename, out_fmt, flags, true, quiet);
if (!out_bs) {
ret = -1;
goto out;
@@ -1475,7 +1518,7 @@ static ImageInfoList *collect_image_info_list(const char
*filename,
g_hash_table_insert(filenames, (gpointer)filename, NULL);
bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_NO_BACKING,
- false);
+ false, false);
if (!bs) {
goto err;
}
@@ -1601,11 +1644,12 @@ static int img_snapshot(int argc, char **argv)
int c, ret = 0, bdrv_oflags;
int action = 0;
qemu_timeval tv;
+ bool quiet = false;
bdrv_oflags = BDRV_O_FLAGS | BDRV_O_RDWR;
/* Parse commandline parameters */
for(;;) {
- c = getopt(argc, argv, "la:c:d:h");
+ c = getopt(argc, argv, "la:c:d:hq");
if (c == -1) {
break;
}
@@ -1646,6 +1690,9 @@ static int img_snapshot(int argc, char **argv)
action = SNAPSHOT_DELETE;
snapshot_name = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
@@ -1655,7 +1702,7 @@ static int img_snapshot(int argc, char **argv)
filename = argv[optind++];
/* Open the image */
- bs = bdrv_new_open(filename, NULL, bdrv_oflags, true);
+ bs = bdrv_new_open(filename, NULL, bdrv_oflags, true, quiet);
if (!bs) {
return 1;
}
@@ -1715,6 +1762,7 @@ static int img_rebase(int argc, char **argv)
int c, flags, ret;
int unsafe = 0;
int progress = 0;
+ bool quiet = false;
/* Parse commandline parameters */
fmt = NULL;
@@ -1722,7 +1770,7 @@ static int img_rebase(int argc, char **argv)
out_baseimg = NULL;
out_basefmt = NULL;
for(;;) {
- c = getopt(argc, argv, "uhf:F:b:pt:");
+ c = getopt(argc, argv, "uhf:F:b:pt:q");
if (c == -1) {
break;
}
@@ -1749,9 +1797,16 @@ static int img_rebase(int argc, char **argv)
case 't':
cache = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
+ if (quiet) {
+ progress = 0;
+ }
+
if ((optind >= argc) || (!unsafe && !out_baseimg)) {
help();
}
@@ -1773,7 +1828,7 @@ static int img_rebase(int argc, char **argv)
* Ignore the old backing file for unsafe rebase in case we want to correct
* the reference to a renamed or moved backing file.
*/
- bs = bdrv_new_open(filename, fmt, flags, true);
+ bs = bdrv_new_open(filename, fmt, flags, true, quiet);
if (!bs) {
return 1;
}
@@ -1985,6 +2040,7 @@ static int img_resize(int argc, char **argv)
int c, ret, relative;
const char *filename, *fmt, *size;
int64_t n, total_size;
+ bool quiet = false;
BlockDriverState *bs = NULL;
QemuOpts *param;
static QemuOptsList resize_options = {
@@ -2013,7 +2069,7 @@ static int img_resize(int argc, char **argv)
/* Parse getopt arguments */
fmt = NULL;
for(;;) {
- c = getopt(argc, argv, "f:h");
+ c = getopt(argc, argv, "f:hq");
if (c == -1) {
break;
}
@@ -2025,6 +2081,9 @@ static int img_resize(int argc, char **argv)
case 'f':
fmt = optarg;
break;
+ case 'q':
+ quiet = true;
+ break;
}
}
if (optind >= argc) {
@@ -2058,7 +2117,7 @@ static int img_resize(int argc, char **argv)
n = qemu_opt_get_size(param, BLOCK_OPT_SIZE, 0);
qemu_opts_del(param);
- bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_RDWR, true);
+ bs = bdrv_new_open(filename, fmt, BDRV_O_FLAGS | BDRV_O_RDWR, true, quiet);
if (!bs) {
ret = -1;
goto out;
@@ -2078,7 +2137,7 @@ static int img_resize(int argc, char **argv)
ret = bdrv_truncate(bs, total_size);
switch (ret) {
case 0:
- printf("Image resized.\n");
+ qprintf(quiet, "Image resized.\n");
break;
case -ENOTSUP:
error_report("This image does not support resize");
diff --git a/qemu-img.texi b/qemu-img.texi
index 1a6c9e3..43430fb 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -54,6 +54,9 @@ indicates that target image must be compressed (qcow format
only)
with or without a command shows help and lists the supported formats
@item -p
display progress bar (convert and rebase commands only)
address@hidden -q
+Quiet mode - do not print any output (except errors). There's no progress bar
+in case both @var{-q} and @var{-p} options are used.
@item -S @var{size}
indicates the consecutive number of bytes that must contain only zeros
for qemu-img to create a sparse image during conversion. This value is rounded
--
1.7.1
- [Qemu-devel] [PATCH v11 0/4] Add subcommand compare for qemu-img, Miroslav Rezanina, 2013/02/13
- [Qemu-devel] [PATCH v11 1/4] block: Add synchronous wrapper for bdrv_co_is_allocated_above, Miroslav Rezanina, 2013/02/13
- [Qemu-devel] [PATCH v11 3/4] qemu-img: Add compare subcommand, Miroslav Rezanina, 2013/02/13
- [Qemu-devel] [PATCH v11 4/4] qemu-iotests: Add qemu-img compare test, Miroslav Rezanina, 2013/02/13
- [Qemu-devel] [PATCH v11 2/4] qemu-img: Add "Quiet mode" option,
Miroslav Rezanina <=
- Re: [Qemu-devel] [PATCH v11 0/4] Add subcommand compare for qemu-img, Kevin Wolf, 2013/02/13
- Re: [Qemu-devel] [PATCH v11 0/4] Add subcommand compare for qemu-img, Stefan Hajnoczi, 2013/02/14