[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 08/12] KVM/MIPS: Enable KVM/MIPS for MIPS targets. A
From: |
Sanjay Lal |
Subject: |
[Qemu-devel] [PATCH 08/12] KVM/MIPS: Enable KVM/MIPS for MIPS targets. Add MIPS GIC code to the build. |
Date: |
Sat, 2 Mar 2013 07:18:43 -0800 |
---
configure | 17 +++++++++++++++--
hw/mips/Makefile.objs | 2 +-
target-mips/Makefile.objs | 1 +
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/configure b/configure
index bf5970f..5447661 100755
--- a/configure
+++ b/configure
@@ -1370,7 +1370,12 @@ case "$cpu" in
bigendian=yes
fi
;;
- hppa|m68k|mips|mips64|ppc|ppc64|s390|s390x|sparc|sparc64)
+ mips|mips64)
+ if check_define __MIPSEB__; then
+ bigendian=yes
+ fi
+ ;;
+ hppa|m68k|ppc|ppc64|s390|s390x|sparc|sparc64)
bigendian=yes
;;
esac
@@ -3844,6 +3849,9 @@ if test "$linux" = "yes" ; then
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
;;
+ mips|mips64)
+ symlink "$source_path/linux-headers/asm-mips" linux-headers/asm
+ ;;
esac
# For non-KVM architectures we will not have asm headers
if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
@@ -4074,7 +4082,7 @@ case "$target_arch2" in
echo "CONFIG_NO_XEN=y" >> $config_target_mak
esac
case "$target_arch2" in
- i386|x86_64|ppcemb|ppc|ppc64|s390x)
+ i386|x86_64|ppcemb|ppc|ppc64|s390x|mipsel|mips)
# Make sure the target and host cpus are compatible
if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
\( "$target_arch2" = "$cpu" -o \
@@ -4082,6 +4090,8 @@ case "$target_arch2" in
\( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \
\( "$target_arch2" = "ppc" -a "$cpu" = "ppc64" \) -o \
\( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc64" \) -o \
+ \( "$target_arch2" = "mipsel" -a "$cpu" = "mips" \) -o \
+ \( "$target_arch2" = "mips" -a "$cpu" = "mips" \) -o \
\( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \
\( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then
echo "CONFIG_KVM=y" >> $config_target_mak
@@ -4285,6 +4295,9 @@ if test "$target_linux_user" = "yes" -o
"$target_bsd_user" = "yes" ; then
*)
ldflags="$linker_script $ldflags"
;;
+ mips|mipsel|mipseb|mips64)
+ symlink $source_path/linux-headers/asm-mips linux-headers/asm
+ ;;
esac
fi
diff --git a/hw/mips/Makefile.objs b/hw/mips/Makefile.objs
index 29a5d0d..c013bac 100644
--- a/hw/mips/Makefile.objs
+++ b/hw/mips/Makefile.objs
@@ -1,6 +1,6 @@
obj-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-y += mips_addr.o mips_timer.o mips_int.o
-obj-y += gt64xxx.o mc146818rtc.o
+obj-y += gt64xxx.o mc146818rtc.o mips_gic.o
obj-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
obj-y := $(addprefix ../,$(obj-y))
diff --git a/target-mips/Makefile.objs b/target-mips/Makefile.objs
index 119c816..1956190 100644
--- a/target-mips/Makefile.objs
+++ b/target-mips/Makefile.objs
@@ -1,2 +1,3 @@
obj-y += translate.o dsp_helper.o op_helper.o lmi_helper.o helper.o cpu.o
obj-$(CONFIG_SOFTMMU) += machine.o
+obj-$(CONFIG_KVM) += kvm.o
--
1.7.11.3
- [Qemu-devel] [PATCH 03/12] KVM/MIPS: Add save/restore state APIs for saving/restoring KVM guests., (continued)
- [Qemu-devel] [PATCH 03/12] KVM/MIPS: Add save/restore state APIs for saving/restoring KVM guests., Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 07/12] KVM/MIPS: QEMU <-> Kernel interface for KVM/MIPS, Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 09/12] KVM/MIPS: set sigmask length to 16 for MIPS targets., Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 11/12] KVM/MIPS: MIPS specfic APIs for KVM., Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 12/12] KVM/MIPS: General KVM support and support for SMP Guests, Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 08/12] KVM/MIPS: Enable KVM/MIPS for MIPS targets. Add MIPS GIC code to the build.,
Sanjay Lal <=
- [Qemu-devel] [PATCH 01/12] KVM/MIPS: Bootcode for MIPS SMP configurations with a GCMP, Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 01/12] MIPS: Bootcode for MIPS SMP configurations with a GCMP, Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 05/12] KVM/MIPS: In KVM mode, inject IRQ2 (I/O) interupts via ioctls(). COP0 emulation is in-kernel, Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 04/12] KVM/MIPS: Do not start the periodic timer in KVM mode. Compare/Count timer interrupts are handled in-kernel., Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 06/12] KVM/MIPS: Define APIs to convert Guest KSEG0 <-> Guest Physical addresses., Sanjay Lal, 2013/03/02
- [Qemu-devel] [PATCH 10/12] KVM/MIPS: Set page size to 16K in KVM mode., Sanjay Lal, 2013/03/02