qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 3/5] milkymist-minimac2: Just expose buffers as a


From: Peter Maydell
Subject: [Qemu-devel] [PATCH v3 3/5] milkymist-minimac2: Just expose buffers as a sysbus mmio region
Date: Fri, 15 Mar 2013 14:34:21 +0000

Just expose the register buffers memory as a standard sysbus mmio
region which the creator of the device can map, rather than
providing a qdev property which the creator has to set to the
base address and then doing the mapping in the device's own
init function.

Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Andreas Färber <address@hidden>
Acked-by: Michael Walle <address@hidden>
---
 hw/milkymist-hw.h       |    2 +-
 hw/milkymist-minimac2.c |    5 +----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/hw/milkymist-hw.h b/hw/milkymist-hw.h
index ced1c5f..aa0865f 100644
--- a/hw/milkymist-hw.h
+++ b/hw/milkymist-hw.h
@@ -177,10 +177,10 @@ static inline DeviceState 
*milkymist_minimac2_create(hwaddr base,
 
     qemu_check_nic_model(&nd_table[0], "minimac2");
     dev = qdev_create(NULL, "milkymist-minimac2");
-    qdev_prop_set_taddr(dev, "buffers_base", buffers_base);
     qdev_set_nic_properties(dev, &nd_table[0]);
     qdev_init_nofail(dev);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, buffers_base);
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, rx_irq);
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, tx_irq);
 
diff --git a/hw/milkymist-minimac2.c b/hw/milkymist-minimac2.c
index c20ff90..29618e8 100644
--- a/hw/milkymist-minimac2.c
+++ b/hw/milkymist-minimac2.c
@@ -96,7 +96,6 @@ struct MilkymistMinimac2State {
     NICState *nic;
     NICConf conf;
     char *phy_model;
-    hwaddr buffers_base;
     MemoryRegion buffers;
     MemoryRegion regs_region;
 
@@ -475,7 +474,7 @@ static int milkymist_minimac2_init(SysBusDevice *dev)
     s->rx1_buf = s->rx0_buf + MINIMAC2_BUFFER_SIZE;
     s->tx_buf = s->rx1_buf + MINIMAC2_BUFFER_SIZE;
 
-    sysbus_add_memory(dev, s->buffers_base, &s->buffers);
+    sysbus_init_mmio(dev, &s->buffers);
 
     qemu_macaddr_default_if_unset(&s->conf.macaddr);
     s->nic = qemu_new_nic(&net_milkymist_minimac2_info, &s->conf,
@@ -517,8 +516,6 @@ static const VMStateDescription vmstate_milkymist_minimac2 
= {
 };
 
 static Property milkymist_minimac2_properties[] = {
-    DEFINE_PROP_TADDR("buffers_base", MilkymistMinimac2State,
-    buffers_base, 0),
     DEFINE_NIC_PROPERTIES(MilkymistMinimac2State, conf),
     DEFINE_PROP_STRING("phy_model", MilkymistMinimac2State, phy_model),
     DEFINE_PROP_END_OF_LIST(),
-- 
1.7.9.5




reply via email to

[Prev in Thread] Current Thread [Next in Thread]