Re: [Qemu-devel] [PATCH v5 0/4] Add i.MX25 support through the 3DS evaluation board

[Jean-Christophe DUBOIS]

Peter (and all),

In your opinion, is this patch set good enough in its actual state for 
inclusion?

Are you expecting anything else from me (beside maybe adding more i.MX 
devices in the future)?

Thanks

JC

On 05/08/2013 10:28 AM, Jean-Christophe DUBOIS wrote:
> This series of patches add the support for the i.MX25 processor through the
> Freescale 3DS evaluation board.
>
> For now a limited set of devices are supported.
>      * GPT timers (from i.MX31)
>      * EPIT timers (from i.MX31)
>      * Serial ports (from i.MX31)
>      * Ethernet FEC port
>      * I2C controller
>
> It also adds qtest support for the I2C controller.
>
> Jean-Christophe DUBOIS (4):
>    Add i.MX FEC Ethernet emulator
>    Add i.MX I2C controller emulator
>    Add i.MX25 3DS evaluation board support.
>    Add qtest support for i.MX I2C device emulation.
>
>   default-configs/arm-softmmu.mak |   3 +
>   hw/arm/Makefile.objs            |   1 +
>   hw/arm/imx25_3ds.c              | 250 ++++++++++++
>   hw/i2c/Makefile.objs            |   1 +
>   hw/i2c/imx_i2c.c                | 357 ++++++++++++++++++
>   hw/i2c/imx_i2c_regs.h           |  63 ++++
>   hw/net/Makefile.objs            |   1 +
>   hw/net/imx_fec.c                | 818 ++++++++++++++++++++++++++++++++++++++++
>   include/hw/arm/imx.h            |  10 +-
>   tests/Makefile                  |   3 +
>   tests/ds1338-test.c             |  75 ++++
>   tests/libqos/i2c-imx.c          | 209 ++++++++++
>   tests/libqos/i2c.h              |   3 +
>   13 files changed, 1788 insertions(+), 6 deletions(-)
>   create mode 100644 hw/arm/imx25_3ds.c
>   create mode 100644 hw/i2c/imx_i2c.c
>   create mode 100644 hw/i2c/imx_i2c_regs.h
>   create mode 100644 hw/net/imx_fec.c
>   create mode 100644 tests/ds1338-test.c
>   create mode 100644 tests/libqos/i2c-imx.c