[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 00/21] AArch64 preparation patchset
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PATCH v5 00/21] AArch64 preparation patchset |
Date: |
Mon, 1 Jul 2013 18:34:59 +0100 |
This patchset is v5 of the "preparation patchset" that started
off with Alex, was passed to John Rigby and now to me.
Things I've done to it:
* various bits of cleanup for style and other minor things
* a little shuffling and splitting of patches
* made the 32 bit CPUs work in aarch64-softmmu
* given aarch64 its own cpu_loop() in linux-user/main.c
* made sure NWFPE doesn't sneak into aarch64-linux-user
* let aarch64 have a nearly clean slate for tb_flags
Individual patches have a summary of my changes in the commit.
I've left the 'global cpu_env variable' patch alone since
there wasn't any consensus about what the best approach was;
it's a pretty minor (and textually localized) thing anyway so
easy to fix in future if it becomes an actual problem.
With these patches:
* new target aarch64-linux-user, which will run but
SIGILL on all instructions
* new target aarch64-softmmu, which will run all the 32 bit
CPUs and board models; however there is no 64 bit CPU
defined so it's a bit pointless except as a demonstration
that we haven't broken the 32 bit code.
I'm generally happy with the patchset and think it could
be committed (except for the last two default-configs patchs
which actually enable the new targets), apart from the fact
that it's not actually terribly useful yet.
There's one patch in here which is obviously going to clash
with my "move cpu_set_tls and cpu_clone_regs to linux-user"
patch, but it will be easy enough to fix when that goes in.
Note that in general the 'signed-off-by:' lines from people
other than me should be taken to indicate credit/authorship
rather than "I'm happy with this patchset", given that I've
changed the patches as they passed through my hands.
Alexander Graf (14):
target-arm: Extract the disas struct to a header file
target-arm: Export cpu_env
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Prepare translation for AArch64 code
target-arm: Add AArch64 translation stub
gdbstub: Add AArch64 support
linux-user: Don't treat AArch64 cpu names specially
linux-user: Add syscall number definitions for AArch64
linux-user: Fix up AArch64 syscall handlers
target-arm: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Add AArch64 termbits.h definitions
linux-user: Add AArch64 support
linux-user: AArch64 requires at least 3.8.0
configure: Add handling code for AArch64 targets
Andreas Schwab (1):
linux-user: Add signal handling for AArch64
Peter Maydell (6):
target-arm: Abstract out load/store from a vaddr in AArch32
target-arm: Pass DisasContext* to gen_set_pc_im()
linux-user: Add cpu loop for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
default-configs: Add config for aarch64-linux-user
default-configs: Add config for aarch64-softmmu
configure | 9 +-
default-configs/aarch64-linux-user.mak | 3 +
default-configs/aarch64-softmmu.mak | 82 ++++++
gdb-xml/aarch64-core.xml | 46 ++++
gdb-xml/aarch64-fpu.xml | 86 +++++++
gdbstub.c | 53 ++++
linux-user/aarch64/syscall.h | 8 +
linux-user/aarch64/syscall_nr.h | 323 ++++++++++++++++++++++++
linux-user/aarch64/target_signal.h | 29 +++
linux-user/aarch64/termbits.h | 220 +++++++++++++++++
linux-user/cpu-uname.c | 3 +-
linux-user/elfload.c | 15 +-
linux-user/main.c | 98 ++++++++
linux-user/qemu.h | 4 +-
linux-user/signal.c | 254 +++++++++++++++++++
linux-user/syscall.c | 10 +-
linux-user/syscall_defs.h | 28 ++-
target-arm/Makefile.objs | 1 +
target-arm/cpu.c | 8 +
target-arm/cpu.h | 152 +++++++++---
target-arm/machine.c | 8 +-
target-arm/translate-a64.c | 137 ++++++++++
target-arm/translate.c | 426 ++++++++++++++++++++------------
target-arm/translate.h | 55 +++++
24 files changed, 1853 insertions(+), 205 deletions(-)
create mode 100644 default-configs/aarch64-linux-user.mak
create mode 100644 default-configs/aarch64-softmmu.mak
create mode 100644 gdb-xml/aarch64-core.xml
create mode 100644 gdb-xml/aarch64-fpu.xml
create mode 100644 linux-user/aarch64/syscall.h
create mode 100644 linux-user/aarch64/syscall_nr.h
create mode 100644 linux-user/aarch64/target_signal.h
create mode 100644 linux-user/aarch64/termbits.h
create mode 100644 target-arm/translate-a64.c
create mode 100644 target-arm/translate.h
--
1.7.9.5
- [Qemu-devel] [PATCH v5 00/21] AArch64 preparation patchset,
Peter Maydell <=
- [Qemu-devel] [PATCH v5 05/21] target-arm: Pass DisasContext* to gen_set_pc_im(), Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 15/21] target-arm: Implement cpu_set_tls() and cpu_clone_regs() for AArch64, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 17/21] linux-user: Add AArch64 support, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 09/21] linux-user: Don't treat AArch64 cpu names specially, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 11/21] linux-user: Add syscall number definitions for AArch64, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 07/21] target-arm: Add AArch64 translation stub, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 08/21] gdbstub: Add AArch64 support, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 06/21] target-arm: Prepare translation for AArch64 code, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 20/21] default-configs: Add config for aarch64-linux-user, Peter Maydell, 2013/07/01
- [Qemu-devel] [PATCH v5 18/21] linux-user: AArch64 requires at least 3.8.0, Peter Maydell, 2013/07/01