[Qemu-devel] [PATCH] qemu-iotests: Update 051 reference output

[Kevin Wolf]

This has been broken by commit bd5c51ee.

Signed-off-by: Kevin Wolf <address@hidden>
---
 tests/qemu-iotests/051.out       | 107 +++++++++++++++++++++++++++------------
 tests/qemu-iotests/common.filter |   2 +-
 2 files changed, 76 insertions(+), 33 deletions(-)

diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index 6b3d636..95ff245 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -23,10 +23,12 @@ QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not
 === Enable and disable lazy refcounting on the command line, plus some invalid 
values ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=off
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=: 
Parameter 'lazy_refcounts' expects 'on' or 'off'
@@ -49,112 +51,152 @@ QEMU_PROG: -drive 
file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on: Lazy ref
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=on: could 
not open disk image TEST_DIR/t.qcow2: Invalid argument
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy_refcounts=off
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 
 === No medium ===
 
 Testing: -drive if=floppy
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=ide,media=cdrom
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=scsi,media=cdrom
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=ide
-QEMU_PROG: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: Device needs media, but drive is empty
+QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive if=virtio
-QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
+QEMU_PROG: -drive if=virtio: Device initialization failed.
+QEMU_PROG: -drive if=virtio: Device initialization failed.
 QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
 
 Testing: -drive if=scsi
-QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
+QEMU_PROG: -drive if=scsi: Device initialization failed.
+QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device lsi53c895a failed
 
 Testing: -drive if=none,id=disk -device ide-cd,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=none,id=disk -device ide-drive,drive=disk
-QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive 
is empty
+QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be 
initialized
 
 Testing: -drive if=none,id=disk -device ide-hd,drive=disk
-QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is 
empty
+QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive 
is empty
+QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be 
initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is 
empty
+QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be 
initialized
 
 
 === Read-only ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on: readonly not 
supported by this bus type
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-cd,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-cd,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-drive,drive=disk
-QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
+QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be 
initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-hd,drive=disk
-QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
+QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-disk,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-hd,drive=disk
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 
 === Cache modes ===
 
 Testing: -drive media=cdrom,cache=none
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=directsync
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=writeback
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=writethrough
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=unsafe
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=invalid_value
 QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option
@@ -163,7 +205,8 @@ QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid 
cache option
 === Specifying the protocol layer ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
-qququiquit
+QEMU 1.5.50 monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: Can't use 'qcow2' 
as a block driver for the protocol level
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index dcf6391..9dbcae8 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -155,7 +155,7 @@ _filter_qemu_io()
 # replace occurrences of QEMU_PROG with "qemu"
 _filter_qemu()
 {
-    sed -e "s#^$(basename $QEMU_PROG):#QEMU_PROG:#"
+    sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#"
 }
 
 # make sure this script returns success
-- 
1.8.1.4