[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 11/11] qmp: add command 'blockdev-backup'
From: |
Fam Zheng |
Subject: |
[Qemu-devel] [PATCH v2 11/11] qmp: add command 'blockdev-backup' |
Date: |
Wed, 17 Jul 2013 17:42:16 +0800 |
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Signed-off-by: Fam Zheng <address@hidden>
---
blockdev.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
qapi-schema.json | 49 ++++++++++++++++++++++++++++++++++++++
qmp-commands.hx | 22 ++++++++++++++++++
3 files changed, 142 insertions(+)
diff --git a/blockdev.c b/blockdev.c
index bb986a1..a3fa5d1 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1517,7 +1517,78 @@ void qmp_drive_backup(const char *device, const char
*target,
error_propagate(errp, local_err);
return;
}
+ /* Grab a reference so hotplug does not delete the BlockDriverState from
+ * underneath us.
+ */
+ drive_get_ref(drive_get_by_blockdev(bs));
+}
+
+void qmp_blockdev_backup(const char *device, const char *target,
+ enum MirrorSyncMode sync,
+ bool has_speed, int64_t speed,
+ bool has_on_source_error,
+ BlockdevOnError on_source_error,
+ bool has_on_target_error,
+ BlockdevOnError on_target_error,
+ Error **errp)
+{
+ BlockDriverState *bs;
+ BlockDriverState *target_bs;
+ Error *local_err = NULL;
+
+ if (sync != MIRROR_SYNC_MODE_FULL) {
+ error_setg(errp, "only sync mode 'full' is currently supported");
+ return;
+ }
+ if (!has_speed) {
+ speed = 0;
+ }
+ if (!has_on_source_error) {
+ on_source_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+ if (!has_on_target_error) {
+ on_target_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+
+ bs = bdrv_find(device);
+ if (!bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
+ }
+
+ if (!bdrv_is_inserted(bs)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
+ return;
+ }
+
+ if (bdrv_in_use(bs)) {
+ error_set(errp, QERR_DEVICE_IN_USE, device);
+ return;
+ }
+
+ target_bs = bdrv_find(target);
+ if (!target_bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, target);
+ return;
+ }
+
+ if (!bdrv_is_inserted(target_bs)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target);
+ return;
+ }
+
+ if (bdrv_in_use(target_bs)) {
+ error_set(errp, QERR_DEVICE_IN_USE, target);
+ return;
+ }
+ backup_start(bs, target_bs, speed, on_source_error, on_target_error,
+ block_job_cb, bs, &local_err);
+ if (local_err != NULL) {
+ bdrv_delete(target_bs);
+ error_propagate(errp, local_err);
+ return;
+ }
/* Grab a reference so hotplug does not delete the BlockDriverState from
* underneath us.
*/
diff --git a/qapi-schema.json b/qapi-schema.json
index 7b9fef1..3b7cfcc 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1665,6 +1665,40 @@
'*on-target-error': 'BlockdevOnError' } }
##
+# @BlockdevBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the name of the backup target device
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 1.6
+##
+{ 'type': 'BlockdevBackup',
+ 'data': { 'device': 'str', 'target': 'str',
+ 'sync': 'MirrorSyncMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
# @Abort
#
# This action can be used to test transaction failure.
@@ -1806,6 +1840,21 @@
{ 'command': 'drive-backup', 'data': 'DriveBackup' }
##
+# @blockdev-backup
+#
+# Block device version for drive-backup command. Use existing device as target
+# of backup.
+#
+# For the arguments, see the documentation of BlockdevBackup.
+#
+# Returns: nothing on success
+# If @device or @target is not a valid block device, DeviceNotFound
+#
+# Since 1.6
+##
+{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
+
+##
# @drive-mirror
#
# Start mirroring a block device's writes to a new destination.
diff --git a/qmp-commands.hx b/qmp-commands.hx
index e075df4..ecd9f64 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -959,6 +959,28 @@ Example:
-> { "execute": "drive-backup", "arguments": { "device": "drive0",
"target": "backup.img" } }
<- { "return": {} }
+
+EQMP
+
+ {
+ .name = "blockdev-backup",
+ .args_type = "sync:s,device:B,target:B,speed:i?,"
+ "on-source-error:s?,on-target-error:s?",
+ .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
+ },
+
+SQMP
+blockdev-backup
+------------
+
+The device version of drive-backup: this command doesn't create new image for
+target, instead it uses a existing named device as target.
+
+Example:
+-> { "execute": "blockdev-backup", "arguments": { "device": "drive0",
+ "target": "drive1" } }
+<- { "return": {} }
+
EQMP
{
--
1.8.3.2
- [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, (continued)
- [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Fam Zheng, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Paolo Bonzini, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Kevin Wolf, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Paolo Bonzini, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Kevin Wolf, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Paolo Bonzini, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Kevin Wolf, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Paolo Bonzini, 2013/07/17
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Fam Zheng, 2013/07/22
- Re: [Qemu-devel] [PATCH v2 10/11] block: add option 'backing' to -drive options, Ian Main, 2013/07/23
[Qemu-devel] [PATCH v2 11/11] qmp: add command 'blockdev-backup',
Fam Zheng <=
Re: [Qemu-devel] [PATCH v2 00/11] Point-in-time snapshot exporting over NBD, Wenchao Xia, 2013/07/19