[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] configure: Remove ldscripts
|
From: |
Richard Henderson |
|
Subject: |
[Qemu-devel] [PATCH] configure: Remove ldscripts |
|
Date: |
Sun, 21 Jul 2013 15:39:26 -0800 |
Since 964c6fa16f50a607f9da5068d6bf15ccc93872c0, these files are unused.
Signed-off-by: Richard Henderson <address@hidden>
---
ldscripts/alpha.ld | 127 ---------------------------
ldscripts/arm.ld | 153 ---------------------------------
ldscripts/hppa.ld | 211 ---------------------------------------------
ldscripts/i386.ld | 153 ---------------------------------
ldscripts/ia64.ld | 209 ---------------------------------------------
ldscripts/m68k.ld | 175 -------------------------------------
ldscripts/mips.ld | 222 -----------------------------------------------
ldscripts/ppc.ld | 237 ---------------------------------------------------
ldscripts/ppc64.ld | 230 -------------------------------------------------
ldscripts/s390.ld | 201 -------------------------------------------
ldscripts/sparc.ld | 150 --------------------------------
ldscripts/sparc64.ld | 138 ------------------------------
ldscripts/x86_64.ld | 180 --------------------------------------
13 files changed, 2386 deletions(-)
delete mode 100644 ldscripts/alpha.ld
delete mode 100644 ldscripts/arm.ld
delete mode 100644 ldscripts/hppa.ld
delete mode 100644 ldscripts/i386.ld
delete mode 100644 ldscripts/ia64.ld
delete mode 100644 ldscripts/m68k.ld
delete mode 100644 ldscripts/mips.ld
delete mode 100644 ldscripts/ppc.ld
delete mode 100644 ldscripts/ppc64.ld
delete mode 100644 ldscripts/s390.ld
delete mode 100644 ldscripts/sparc.ld
delete mode 100644 ldscripts/sparc64.ld
delete mode 100644 ldscripts/x86_64.ld
diff --git a/ldscripts/alpha.ld b/ldscripts/alpha.ld
deleted file mode 100644
index 906d76b..0000000
--- a/ldscripts/alpha.ld
+++ /dev/null
@@ -1,127 +0,0 @@
-OUTPUT_FORMAT("elf64-alpha", "elf64-alpha",
- "elf64-alpha")
-OUTPUT_ARCH(alpha)
-ENTRY(__start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.text :
- { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text :
- { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data :
- { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data :
- { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata :
- { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata :
- { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) } =0x47ff041f
- .text :
- {
- *(.text)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.gnu.linkonce.t*)
- } =0x47ff041f
- _etext = .;
- PROVIDE (etext = .);
- .fini : { *(.fini) } =0x47ff041f
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x100000) + (. & (0x100000 - 1));
- .data :
- {
- *(.data)
- *(.gnu.linkonce.d*)
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- .ctors :
- {
- *(.ctors)
- }
- .dtors :
- {
- *(.dtors)
- }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
-}
diff --git a/ldscripts/arm.ld b/ldscripts/arm.ld
deleted file mode 100644
index 7f13da9..0000000
--- a/ldscripts/arm.ld
+++ /dev/null
@@ -1,153 +0,0 @@
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm",
- "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.text :
- { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text :
- { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data :
- { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data :
- { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata :
- { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata :
- { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) } =0x47ff041f
- .text :
- {
- *(.text)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.gnu.linkonce.t*)
- } =0x47ff041f
- _etext = .;
- PROVIDE (etext = .);
- .fini : { *(.fini) } =0x47ff041f
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
- .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
- __exidx_start = .;
- .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
- __exidx_end = .;
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x100000) + (. & (0x100000 - 1));
- .data :
- {
- *(.gen_code)
- *(.data)
- *(.gnu.linkonce.d*)
- CONSTRUCTORS
- }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .data1 : { *(.data1) }
- .preinit_array :
- {
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
- }
- .init_array :
- {
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
- }
- .fini_array :
- {
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
- }
- .ctors :
- {
- *(.ctors)
- }
- .dtors :
- {
- *(.dtors)
- }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
-}
diff --git a/ldscripts/hppa.ld b/ldscripts/hppa.ld
deleted file mode 100644
index 3555b3e..0000000
--- a/ldscripts/hppa.ld
+++ /dev/null
@@ -1,211 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-hppa-linux", "elf32-hppa-linux",
- "elf32-hppa-linux")
-OUTPUT_ARCH(hppa:hppa1.1)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
- .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
- .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
- .rel.data.rel.ro : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
- .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
- .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
- .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
- .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
- .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
- .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
- .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
- .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
- .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
- .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
- .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
- .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
- .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
- .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
- .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init :
- {
- KEEP (*(.init))
- } =0x08000240
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- KEEP (*(.text.*personality*))
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0x08000240
- .fini :
- {
- KEEP (*(.fini))
- } =0x08000240
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 :
- {
- *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
- }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .PARISC.unwind : { *(.PARISC.unwind) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x10000) + (. & (0x10000 - 1));
- /* Exception handling */
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) }
- /* Thread Local Storage sections */
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .preinit_array :
- {
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
- }
- .init_array :
- {
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
- }
- .fini_array :
- {
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
- }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*)
*(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
- .dynamic : { *(.dynamic) }
- .data :
- {
- PROVIDE ($global$ = .);
- *(.data .data.* .gnu.linkonce.d.*)
- KEEP (*(.gnu.linkonce.d.*personality*))
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- _edata = .; PROVIDE (edata = .);
- __bss_start = .;
- .sbss :
- {
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- }
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections.
- FIXME: Why do we need it? When there is no .bss section, we don't
- pad the .data section. */
- . = ALIGN(. != 0 ? 32 / 8 : 1);
- }
- . = ALIGN(32 / 8);
- . = ALIGN(32 / 8);
- _end = .; PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/i386.ld b/ldscripts/i386.ld
deleted file mode 100644
index cc3f160..0000000
--- a/ldscripts/i386.ld
+++ /dev/null
@@ -1,153 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <address@hidden>;
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.text :
- { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text :
- { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data :
- { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data :
- { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata :
- { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata :
- { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt :
- {
- *(.rel.plt)
- PROVIDE (__rel_iplt_start = .);
- *(.rel.iplt)
- PROVIDE (__rel_iplt_end = .);
- }
- .rela.plt :
- {
- *(.rela.plt)
- PROVIDE (__rela_iplt_start = .);
- *(.rela.iplt)
- PROVIDE (__rela_iplt_end = .);
- }
- .init : { *(.init) } =0x47ff041f
- .text :
- {
- *(.text)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.gnu.linkonce.t*)
- } =0x47ff041f
- _etext = .;
- PROVIDE (etext = .);
- .fini : { *(.fini) } =0x47ff041f
- . = ALIGN(32 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x100000) + (. & (0x100000 - 1));
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .data :
- {
- *(.data)
- *(.gnu.linkonce.d*)
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- .ctors :
- {
- *(.ctors)
- }
- .dtors :
- {
- *(.dtors)
- }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
-}
diff --git a/ldscripts/ia64.ld b/ldscripts/ia64.ld
deleted file mode 100644
index 0c37796..0000000
--- a/ldscripts/ia64.ld
+++ /dev/null
@@ -1,209 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf64-ia64-little", "elf64-ia64-little",
- "elf64-ia64-little")
-OUTPUT_ARCH(ia64)
-ENTRY(_start)
-/* __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
- .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
- .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
- .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
- .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
- .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
- .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
- .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
- .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
- .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
- .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
- .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
- .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
- .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
- .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
- .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
- .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
- .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .rela.IA_64.pltoff : { *(.rela.IA_64.pltoff) }
- .init :
- {
- KEEP (*(.init))
- } =0x00300000010070000002000001000400
- .plt : { *(.plt) }
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0x00300000010070000002000001000400
- .fini :
- {
- KEEP (*(.fini))
- } =0x00300000010070000002000001000400
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .opd : { *(.opd) }
- .IA_64.unwind_info : { *(.IA_64.unwind_info* .gnu.linkonce.ia64unwi.*) }
- .IA_64.unwind : { *(.IA_64.unwind* .gnu.linkonce.ia64unw.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x10000) + (. & (0x10000 - 1));
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(64 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
- .dynamic : { *(.dynamic) }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- /* Ensure __gp is outside the range of any normal data. We need to
- do this to avoid the linker optimizing the code in op.o and getting
- it out of sync with the relocs that we read when processing that
- file. A better solution might be to ensure that the dynamically
- generated code and static qemu code share a single gp-value. */
- __gp = . + 0x200000;
- .got : { *(.got.plt) *(.got) }
- .IA_64.pltoff : { *(.IA_64.pltoff) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss :
- {
- PROVIDE (__sbss_start = .);
- PROVIDE (___sbss_start = .);
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- PROVIDE (__sbss_end = .);
- PROVIDE (___sbss_end = .);
- }
- .bss :
- {
- . += 0x400000; /* ensure .bss stuff is out of reach of gp */
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- . = ALIGN(64 / 8);
- }
- . = ALIGN(64 / 8);
- _end = .;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/m68k.ld b/ldscripts/m68k.ld
deleted file mode 100644
index 0e3d9de..0000000
--- a/ldscripts/m68k.ld
+++ /dev/null
@@ -1,175 +0,0 @@
-/* Script for -z combreloc: combine and sort reloc sections */
-OUTPUT_FORMAT("elf32-m68k", "elf32-m68k",
- "elf32-m68k")
-OUTPUT_ARCH(m68k)
-ENTRY(_start)
-/* __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.dyn :
- {
- *(.rel.init)
- *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
- *(.rel.fini)
- *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
- *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
- *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
- *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
- *(.rel.ctors)
- *(.rel.dtors)
- *(.rel.got)
- *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
- }
- .rela.dyn :
- {
- *(.rela.init)
- *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
- *(.rela.fini)
- *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
- *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
- *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
- *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
- *(.rela.ctors)
- *(.rela.dtors)
- *(.rela.got)
- *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
- }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init :
- {
- KEEP (*(.init))
- } =0x4e754e75
- .plt : { *(.plt) }
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0x4e754e75
- .fini :
- {
- KEEP (*(.fini))
- } =0x4e754e75
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x2000) + (. & (0x2000 - 1));
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(32 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
- .dynamic : { *(.dynamic) }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .got : { *(.got.plt) *(.got) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- . = ALIGN(32 / 8);
- }
- . = ALIGN(32 / 8);
- _end = .;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
diff --git a/ldscripts/mips.ld b/ldscripts/mips.ld
deleted file mode 100644
index 7b610ce..0000000
--- a/ldscripts/mips.ld
+++ /dev/null
@@ -1,222 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips",
- "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(__start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- PROVIDE (__executable_start = 0x0400000); . = 0x0400000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .reginfo : { *(.reginfo) }
- .dynamic : { *(.dynamic) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
- .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
- .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
- .rel.data.rel.ro : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
- .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
- .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
- .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
- .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
- .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
- .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
- .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
- .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
- .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
- .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
- .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
- .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
- .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
- .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
- .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init :
- {
- KEEP (*(.init))
- } =0x47ff041f
- .plt : { *(.plt) }
- .text :
- {
- _ftext = . ;
- *(.text .stub .text.* .gnu.linkonce.t.*)
- KEEP (*(.text.*personality*))
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.mips16.fn.*) *(.mips16.call.*)
- } =0x47ff041f
- .fini :
- {
- KEEP (*(.fini))
- } =0x47ff041f
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 :
- {
- *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
- }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN (0x40000) - ((0x40000 - .) & (0x40000 - 1)); . =
DATA_SEGMENT_ALIGN (0x40000, 0x1000);
- /* Exception handling */
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) }
- /* Thread Local Storage sections */
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .preinit_array :
- {
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
- }
- .init_array :
- {
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
- }
- .fini_array :
- {
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
- }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*)
*(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
- . = DATA_SEGMENT_RELRO_END (0, .);
- .data :
- {
- _fdata = . ;
- *(.data .data.* .gnu.linkonce.d.*)
- KEEP (*(.gnu.linkonce.d.*personality*))
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- . = .;
- _gp = ALIGN(16) + 0x7ff0;
- .got : { *(.got.plt) *(.got) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- .lit8 : { *(.lit8) }
- .lit4 : { *(.lit4) }
- _edata = .; PROVIDE (edata = .);
- __bss_start = .;
- _fbss = .;
- .sbss :
- {
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- }
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections.
- FIXME: Why do we need it? When there is no .bss section, we don't
- pad the .data section. */
- . = ALIGN(. != 0 ? 32 / 8 : 1);
- }
- . = ALIGN(32 / 8);
- . = ALIGN(32 / 8);
- _end = .; PROVIDE (end = .);
- . = DATA_SEGMENT_END (.);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
- .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/ppc.ld b/ldscripts/ppc.ld
deleted file mode 100644
index 2a0dcad..0000000
--- a/ldscripts/ppc.ld
+++ /dev/null
@@ -1,237 +0,0 @@
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <address@hidden>;
- */
-OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc")
-OUTPUT_ARCH(powerpc:common)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
- .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
- .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
- .rel.data.rel.ro : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
- .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
- .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
- .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
- .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
- .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
- .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rela.got1 : { *(.rela.got1) }
- .rela.got2 : { *(.rela.got2) }
- .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
- .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
- .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
- .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
- .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
- .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
- .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
- .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
- .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
- .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
- .rel.plt :
- {
- *(.rel.plt)
- PROVIDE (__rel_iplt_start = .);
- *(.rel.iplt)
- PROVIDE (__rel_iplt_end = .);
- }
- .rela.plt :
- {
- *(.rela.plt)
- PROVIDE (__rela_iplt_start = .);
- *(.rela.iplt)
- PROVIDE (__rela_iplt_end = .);
- }
- .init :
- {
- KEEP (*(.init))
- } =0
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- KEEP (*(.text.*personality*))
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.glink)
- } =0x47ff041f
- .fini :
- {
- KEEP (*(.fini))
- } =0x47ff041f
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 :
- {
- PROVIDE (_SDA2_BASE_ = 32768);
- *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
- }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN (0x10000) - ((0x10000 - .) & (0x10000 - 1)); . =
DATA_SEGMENT_ALIGN (0x10000, 0x1000);
- /* Exception handling */
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) }
- /* Thread Local Storage sections */
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .preinit_array :
- {
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
- }
- .init_array :
- {
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
- }
- .fini_array :
- {
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
- }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*)
*(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
- .got1 : { *(.got1) }
- .got2 : { *(.got2) }
- .dynamic : { *(.dynamic) }
- .got : SPECIAL { *(.got) }
- . = DATA_SEGMENT_RELRO_END (0, .);
- .plt : SPECIAL { *(.plt) }
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- KEEP (*(.gnu.linkonce.d.*personality*))
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .got : SPECIAL { *(.got) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- PROVIDE (_SDA_BASE_ = 32768);
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- _edata = .; PROVIDE (edata = .);
- __bss_start = .;
- .sbss :
- {
- PROVIDE (__sbss_start = .); PROVIDE (___sbss_start = .);
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- PROVIDE (__sbss_end = .); PROVIDE (___sbss_end = .);
- }
- .plt : SPECIAL { *(.plt) }
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections.
- FIXME: Why do we need it? When there is no .bss section, we don't
- pad the .data section. */
- . = ALIGN(. != 0 ? 32 / 8 : 1);
- }
- . = ALIGN(32 / 8);
- . = ALIGN(32 / 8);
- _end = .; PROVIDE (end = .);
- . = DATA_SEGMENT_END (.);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
- /DISCARD/ : { *(.fixup) }
- /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/ppc64.ld b/ldscripts/ppc64.ld
deleted file mode 100644
index e2dafa0..0000000
--- a/ldscripts/ppc64.ld
+++ /dev/null
@@ -1,230 +0,0 @@
-/* Script for -z combreloc: combine and sort reloc sections */
-OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc",
- "elf64-powerpc")
-OUTPUT_ARCH(powerpc:common64)
-ENTRY(_start)
-/* __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- PROVIDE (__executable_start = 0x60000000); . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.dyn :
- {
- *(.rel.init)
- *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
- *(.rel.fini)
- *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
- *(.rel.data.rel.ro*)
- *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
- *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
- *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
- *(.rel.ctors)
- *(.rel.dtors)
- *(.rel.got)
- *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
- *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
- *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
- *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
- *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
- }
- .rela.dyn :
- {
- *(.rela.init)
- *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
- *(.rela.fini)
- *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
- *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
- *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
- *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
- *(.rela.ctors)
- *(.rela.dtors)
- *(.rela.got)
- *(.rela.toc)
- *(.rela.opd)
- *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
- *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
- *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
- *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
- *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
- }
- .rel.plt :
- {
- *(.rel.plt)
- PROVIDE (__rel_iplt_start = .);
- *(.rel.iplt)
- PROVIDE (__rel_iplt_end = .);
- }
- .rela.plt :
- {
- *(.rela.plt)
- PROVIDE (__rela_iplt_start = .);
- *(.rela.iplt)
- PROVIDE (__rela_iplt_end = .);
- }
- .rela.tocbss : { *(.rela.tocbss) }
- .init :
- {
- KEEP (*(.init))
- } =0x60000000
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- KEEP (*(.text.*personality*))
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.sfpr .glink)
- } =0x60000000
- .fini :
- {
- KEEP (*(.fini))
- } =0x60000000
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN (0x10000) - ((0x10000 - .) & (0x10000 - 1)); . = DATA_SEGMENT_ALIGN
-(0x10000, 0x1000); /* Exception handling */
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { KEEP (*(.gcc_except_table))
-*(.gcc_except_table.*) } /* Thread Local Storage sections */
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(64 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { KEEP (*(.preinit_array)) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { KEEP (*(.init_array)) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { KEEP (*(.fini_array)) }
- PROVIDE (__fini_array_end = .);
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin*.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }
- .dynamic : { *(.dynamic) }
- . = DATA_SEGMENT_RELRO_END (0, .);
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- KEEP (*(.gnu.linkonce.d.*personality*))
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .toc1 ALIGN(8) : { *(.toc1) }
- .opd ALIGN(8) : { KEEP (*(.opd)) }
- .got ALIGN(8) : { *(.got .toc) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .tocbss ALIGN(8) : { *(.tocbss)}
- .sbss :
- {
- PROVIDE (__sbss_start = .);
- PROVIDE (___sbss_start = .);
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- PROVIDE (__sbss_end = .);
- PROVIDE (___sbss_end = .);
- }
- .plt : { *(.plt) }
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- . = ALIGN(64 / 8);
- }
- . = ALIGN(64 / 8);
- _end = .;
- PROVIDE (end = .);
- . = DATA_SEGMENT_END (.);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /DISCARD/ : { *(.note.GNU-stack) }
-}
diff --git a/ldscripts/s390.ld b/ldscripts/s390.ld
deleted file mode 100644
index a9c5370..0000000
--- a/ldscripts/s390.ld
+++ /dev/null
@@ -1,201 +0,0 @@
-OUTPUT_FORMAT("elf32-s390", "elf32-s390",
- "elf32-s390")
-OUTPUT_ARCH(s390:31-bit)
-ENTRY(_start)
-/* __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.dyn :
- {
- *(.rel.init)
- *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
- *(.rel.fini)
- *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
- *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
- *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
- *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
- *(.rel.ctors)
- *(.rel.dtors)
- *(.rel.got)
- *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*)
- *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*)
- *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*)
- *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*)
- *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
- }
- .rela.dyn :
- {
- *(.rela.init)
- *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
- *(.rela.fini)
- *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
- *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
- *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
- *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
- *(.rela.ctors)
- *(.rela.dtors)
- *(.rela.got)
- *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*)
- *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*)
- *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*)
- *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*)
- *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
- }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init :
- {
- KEEP (*(.init))
- } =0x07070707
- .plt : { *(.plt) }
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0x07070707
- .fini :
- {
- KEEP (*(.fini))
- } =0x07070707
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .sdata2 : { *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) }
- .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x1000) + (. & (0x1000 - 1));
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(32 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
- .dynamic : { *(.dynamic) }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .got : { *(.got.plt) *(.got) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata :
- {
- *(.sdata .sdata.* .gnu.linkonce.s.*)
- }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss :
- {
- PROVIDE (__sbss_start = .);
- PROVIDE (___sbss_start = .);
- *(.dynsbss)
- *(.sbss .sbss.* .gnu.linkonce.sb.*)
- *(.scommon)
- PROVIDE (__sbss_end = .);
- PROVIDE (___sbss_end = .);
- }
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- . = ALIGN(32 / 8);
- }
- . = ALIGN(32 / 8);
- _end = .;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
diff --git a/ldscripts/sparc.ld b/ldscripts/sparc.ld
deleted file mode 100644
index 56efe34..0000000
--- a/ldscripts/sparc.ld
+++ /dev/null
@@ -1,150 +0,0 @@
-OUTPUT_FORMAT("elf32-sparc", "elf32-sparc",
- "elf32-sparc")
-OUTPUT_ARCH(sparc)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.text :
- { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text :
- { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data :
- { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data :
- { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata :
- { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata :
- { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) } =0x47ff041f
- .text :
- {
- *(.text)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.gnu.linkonce.t*)
- } =0x47ff041f
- _etext = .;
- PROVIDE (etext = .);
- .fini : { *(.fini) } =0x47ff041f
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x100000) + (. & (0x100000 - 1));
- .data :
- {
- *(.data)
- *(.gnu.linkonce.d*)
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- .tdata : { *(.tdata) }
- .tbss : { *(.tbss) }
- .preinit_array :
- {
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
- }
- .init_array :
- {
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
- }
- .fini_array :
- {
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
- }
- .ctors :
- {
- *(.ctors)
- }
- .dtors :
- {
- *(.dtors)
- }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
- /DISCARD/ : { *(.note.GNU-stack) *(.note.ABI-tag) }
-}
diff --git a/ldscripts/sparc64.ld b/ldscripts/sparc64.ld
deleted file mode 100644
index 9ea4143..0000000
--- a/ldscripts/sparc64.ld
+++ /dev/null
@@ -1,138 +0,0 @@
-OUTPUT_FORMAT("elf64-sparc", "elf64-sparc",
- "elf64-sparc")
-OUTPUT_ARCH(sparc:v9)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.text :
- { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text :
- { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data :
- { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data :
- { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata :
- { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata :
- { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) } =0x47ff041f
- .text :
- {
- *(.text)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- *(.gnu.linkonce.t*)
- } =0x47ff041f
- _etext = .;
- PROVIDE (etext = .);
- .fini : { *(.fini) } =0x47ff041f
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
- . = ALIGN(64 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .reginfo : { *(.reginfo) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN(0x100000) + (. & (0x100000 - 1));
- .data :
- {
- *(.gen_code)
- *(.data)
- *(.gnu.linkonce.d*)
- CONSTRUCTORS
- }
- .data1 : { *(.data1) }
- .ctors :
- {
- *(.ctors)
- }
- .dtors :
- {
- *(.dtors)
- }
- .plt : { *(.plt) }
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
- /* These must appear regardless of . */
-}
diff --git a/ldscripts/x86_64.ld b/ldscripts/x86_64.ld
deleted file mode 100644
index b7a9f4e..0000000
--- a/ldscripts/x86_64.ld
+++ /dev/null
@@ -1,180 +0,0 @@
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(_start)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = 0x60000000 + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
- .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
- .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
- .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
- .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
- .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
- .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
- .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
- .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
- .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
- .rel.plt :
- {
- *(.rel.plt)
- PROVIDE (__rel_iplt_start = .);
- *(.rel.iplt)
- PROVIDE (__rel_iplt_end = .);
- }
- .rela.plt :
- {
- *(.rela.plt)
- PROVIDE (__rela_iplt_start = .);
- *(.rela.iplt)
- PROVIDE (__rela_iplt_end = .);
- }
- .init :
- {
- KEEP (*(.init))
- } =0x90909090
- .plt : { *(.plt) }
- .text :
- {
- *(.text .stub .text.* .gnu.linkonce.t.*)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- } =0x90909090
- .fini :
- {
- KEEP (*(.fini))
- } =0x90909090
- PROVIDE (__etext = .);
- PROVIDE (_etext = .);
- PROVIDE (etext = .);
- .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- .rodata1 : { *(.rodata1) }
- .eh_frame_hdr : { *(.eh_frame_hdr) }
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- . = ALIGN (0x100000) - ((0x100000 - .) & (0x100000 - 1)); . =
DATA_SEGMENT_ALIGN (0x100000, 0x1000);
- /* Ensure the __preinit_array_start label is properly aligned. We
- could instead move the label definition inside the section, but
- the linker would then create the section even if it turns out to
- be empty, which isn't pretty. */
- . = ALIGN(64 / 8);
- PROVIDE (__preinit_array_start = .);
- .preinit_array : { *(.preinit_array) }
- PROVIDE (__preinit_array_end = .);
- PROVIDE (__init_array_start = .);
- .init_array : { *(.init_array) }
- PROVIDE (__init_array_end = .);
- PROVIDE (__fini_array_start = .);
- .fini_array : { *(.fini_array) }
- PROVIDE (__fini_array_end = .);
- .data :
- {
- *(.data .data.* .gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- }
- .data1 : { *(.data1) }
- .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
- .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
- .dynamic : { *(.dynamic) }
- .ctors :
- {
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
- KEEP (*crtbegin.o(.ctors))
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- }
- .dtors :
- {
- KEEP (*crtbegin.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- }
- .jcr : { KEEP (*(.jcr)) }
- .got : { *(.got.plt) *(.got) }
- _edata = .;
- PROVIDE (edata = .);
- __bss_start = .;
- .bss :
- {
- *(.dynbss)
- *(.bss .bss.* .gnu.linkonce.b.*)
- *(COMMON)
- /* Align here to ensure that the .bss section occupies space up to
- _end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- . = ALIGN(64 / 8);
- }
- . = ALIGN(64 / 8);
- _end = .;
- PROVIDE (end = .);
- . = DATA_SEGMENT_END (.);
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
--
1.8.3.1
- [Qemu-devel] [PATCH] configure: Remove ldscripts,
Richard Henderson <=