Re: [Qemu-devel] SCSI bus failures with qemu-arm in kernel 3.8+

[Russell King - ARM Linux]

On Mon, Aug 12, 2013 at 10:36:17PM +0100, Peter Maydell wrote:
> On this point, yes. Equivalent bit from the PB926 TRM:
> http://infocenter.arm.com/help/topic/com.arm.doc.dui0224i/Cacdijji.html
> 
> (There are differences between the PCI controllers on
> the different boards. Differences I know of are:
>  * size of the three memory mapped regions
>  * whether the top bits of the PCI address come from the top
>    or bottom of the IMAP* registers
> I believe (based on some experimentation and an educated guess)
> that these both changed at the same point, but some of the board
> TRMs claim to be part one way part the other, presumably due to
> copy and paste error. In particular PB1176's TRM has a mangled
> description of the IMAP* registers which didn't match what the
> h/w actually did in my testing.)

Bah, updated TRMs since my version.

Right, so if I've traced everything correctly, this should work:

        /*
         * Slot INTA    INTB    INTC    INTD
         *  31  PCI1    PCI2    PCI3    PCI0
         *  30  PCI0    PCI1    PCI2    PCI3
         *  29  PCI3    PCI0    PCI1    PCI2
         */
        return IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);