[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC PATCH v3 2/2] qmp: add command 'blockdev-backup'
From: |
Fam Zheng |
Subject: |
[Qemu-devel] [RFC PATCH v3 2/2] qmp: add command 'blockdev-backup' |
Date: |
Thu, 17 Oct 2013 13:36:43 +0800 |
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Signed-off-by: Fam Zheng <address@hidden>
---
blockdev.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
qapi-schema.json | 49 +++++++++++++++++++++++++++++++++++++++++++
qmp-commands.hx | 46 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 158 insertions(+)
diff --git a/blockdev.c b/blockdev.c
index 4f76e28..c53d597 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1937,6 +1937,69 @@ void qmp_drive_backup(const char *device, const char
*target,
}
}
+void qmp_blockdev_backup(const char *device, const char *target,
+ enum MirrorSyncMode sync,
+ bool has_speed, int64_t speed,
+ bool has_on_source_error,
+ BlockdevOnError on_source_error,
+ bool has_on_target_error,
+ BlockdevOnError on_target_error,
+ Error **errp)
+{
+ BlockDriverState *bs;
+ BlockDriverState *target_bs;
+ Error *local_err = NULL;
+
+ if (!has_speed) {
+ speed = 0;
+ }
+ if (!has_on_source_error) {
+ on_source_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+ if (!has_on_target_error) {
+ on_target_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+
+ bs = bdrv_find(device);
+ if (!bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
+ }
+
+ if (!bdrv_is_inserted(bs)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
+ return;
+ }
+
+ if (bdrv_in_use(bs)) {
+ error_set(errp, QERR_DEVICE_IN_USE, device);
+ return;
+ }
+
+ target_bs = bdrv_find(target);
+ if (!target_bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, target);
+ return;
+ }
+
+ if (!bdrv_is_inserted(target_bs)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target);
+ return;
+ }
+
+ if (bdrv_in_use(target_bs)) {
+ error_set(errp, QERR_DEVICE_IN_USE, target);
+ return;
+ }
+
+ bdrv_ref(target_bs);
+ backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
+ block_job_cb, bs, &local_err);
+ if (local_err != NULL) {
+ error_propagate(errp, local_err);
+ }
+}
+
#define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
void qmp_drive_mirror(const char *device, const char *target,
diff --git a/qapi-schema.json b/qapi-schema.json
index 60f3fd1..89bc510 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1794,6 +1794,40 @@
'*on-target-error': 'BlockdevOnError' } }
##
+# @BlockdevBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the name of the backup target device
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevBackup',
+ 'data': { 'device': 'str', 'target': 'str',
+ 'sync': 'MirrorSyncMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
# @Abort
#
# This action can be used to test transaction failure.
@@ -1983,6 +2017,21 @@
{ 'command': 'drive-backup', 'data': 'DriveBackup' }
##
+# @blockdev-backup
+#
+# Block device version for drive-backup command. Use existing device as target
+# of backup.
+#
+# For the arguments, see the documentation of BlockdevBackup.
+#
+# Returns: nothing on success
+# If @device or @target is not a valid block device, DeviceNotFound
+#
+# Since 1.7
+##
+{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
+
+##
# @drive-mirror
#
# Start mirroring a block device's writes to a new destination.
diff --git a/qmp-commands.hx b/qmp-commands.hx
index fba15cd..4116a8d 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -963,6 +963,52 @@ Example:
"sync": "full",
"target": "backup.img" } }
<- { "return": {} }
+
+EQMP
+
+ {
+ .name = "blockdev-backup",
+ .args_type = "sync:s,device:B,target:B,speed:i?,"
+ "on-source-error:s?,on-target-error:s?",
+ .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
+ },
+
+SQMP
+blockdev-backup
+------------
+
+The device version of drive-backup: this command takes a existing named device
+as backup target.
+
+Arguments:
+
+- "device": the name of the device which should be copied.
+ (json-string)
+- "target": the target of the new image. If the file exists, or if it is a
+ device, the existing file/device will be used as the new
+ destination. If it does not exist, a new file will be created.
+ (json-string)
+- "sync": what parts of the disk image should be copied to the destination;
+ possibilities include "full" for all the disk, "top" for only the sectors
+ allocated in the topmost image, or "none" to only replicate new I/O
+ (MirrorSyncMode).
+- "mode": whether and how QEMU should create a new image
+ (NewImageMode, optional, default 'absolute-paths')
+- "speed": the maximum speed, in bytes per second (json-int, optional)
+- "on-source-error": the action to take on an error on the source, default
+ 'report'. 'stop' and 'enospc' can only be used
+ if the block device supports io-status.
+ (BlockdevOnError, optional)
+- "on-target-error": the action to take on an error on the target, default
+ 'report' (no limitations, since this applies to
+ a different block device than device).
+ (BlockdevOnError, optional)
+
+Example:
+-> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
+ "target": "tgt-id" } }
+<- { "return": {} }
+
EQMP
{
--
1.8.3.1