[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 05/10] pci-host: Consistently set cannot_inst
From: |
Andreas Färber |
Subject: |
Re: [Qemu-devel] [PATCH v2 05/10] pci-host: Consistently set cannot_instantiate_with_device_add_yet |
Date: |
Wed, 30 Oct 2013 14:12:25 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 |
Am 30.10.2013 13:30, schrieb Markus Armbruster:
> Marcel Apfelbaum <address@hidden> writes:
>
>> On Tue, 2013-10-29 at 17:08 +0100, address@hidden wrote:
>>> From: Markus Armbruster <address@hidden>
>>>
>>> Many PCI host bridges consist of a sysbus device and a PCI device.
>>> You need both for the thing to work. Arguably, these bridges should
>>> be modelled as a single, composite devices instead of pairs of
>>> seemingly independent devices you can only use together, but we're not
>>> there, yet.
>>>
>>> Since the sysbus part can't be instantiated with device_add, yet,
>>> permitting it with the PCI part is useless. We shouldn't offer
>>> useless options to the user, so let's set
>>> cannot_instantiate_with_device_add_yet for them.
>>>
>>> It's already set for Bonito, grackle, i440FX, and raven. Document
>>> why.
>>>
>>> Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
>>> pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
>>> uni-north-internal-pci, uni-north-pci, and versatile_pci_host.
>>>
>>> Signed-off-by: Markus Armbruster <address@hidden>
>>> ---
>>> hw/mips/gt64xxx_pci.c | 6 ++++++
>>> hw/pci-bridge/dec.c | 6 ++++++
>>> hw/pci-host/apb.c | 6 ++++++
>>> hw/pci-host/bonito.c | 6 +++++-
>>> hw/pci-host/grackle.c | 6 +++++-
>>> hw/pci-host/piix.c | 6 +++++-
>>> hw/pci-host/ppce500.c | 5 +++++
>>> hw/pci-host/prep.c | 6 +++++-
>>> hw/pci-host/q35.c | 5 +++++
>>> hw/pci-host/uninorth.c | 24 ++++++++++++++++++++++++
>>> hw/pci-host/versatile.c | 6 ++++++
>>> hw/ppc/ppc4xx_pci.c | 5 +++++
>>> hw/sh4/sh_pci.c | 6 ++++++
>>> 13 files changed, 89 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/hw/mips/gt64xxx_pci.c b/hw/mips/gt64xxx_pci.c
>>> index 3da2e67..6398514 100644
>>> --- a/hw/mips/gt64xxx_pci.c
>>> +++ b/hw/mips/gt64xxx_pci.c
>>> @@ -1151,12 +1151,18 @@ static int gt64120_pci_init(PCIDevice *d)
>>> static void gt64120_pci_class_init(ObjectClass *klass, void *data)
>>> {
>>> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>>> + DeviceClass *dc = DEVICE_CLASS(klass);
>>>
>>> k->init = gt64120_pci_init;
>>> k->vendor_id = PCI_VENDOR_ID_MARVELL;
>>> k->device_id = PCI_DEVICE_ID_MARVELL_GT6412X;
>>> k->revision = 0x10;
>>> k->class_id = PCI_CLASS_BRIDGE_HOST;
>>> + /*
>>> + * PCI-facing part of the host bridge, not usable without the
>>> + * host-facing part, which can't be device_add'ed, yet.
>>> + */
>>> + dc->cannot_instantiate_with_device_add_yet = true;
>> I noticed that all class_id in this patch are PCI_CLASS_BRIDGE_HOST.
>
> Correct.
>
>> What do you think about a different approach: check class_id
>> in parent class init func and set the flag according to it?
>> It corresponds to your idea of changing only sysbus base class.
>> Here we don't have a "natural" base class, but we can use class_id.
>> What do you think?
>
> My understanding of QOM is rather limited, so take the following with
> due skepticism.
>
> I'm afraid the parent's class_init() runs before the child's, and
> therefore can't see class_id PCI_CLASS_BRIDGE_HOST set by the child's
> class_init().
Right.
> To factor common initialization code, I figure I'd have to splice in an
> abstract TYPE_PCI_HOST_BRIDGE between TYPE_PCI_DEVICE and the host
> bridge types such as this one. Might make sense, but it's a bit more
> than I bargained for in this series :)
I don't quite follow: We already have an abstract TYPE_PCI_HOST_BRIDGE
in between TYPE_SYS_BUS_DEVICE and the concrete host bridge. You mean a
base type TYPE_PCI_HOST_BRIDGE_DEVICE for the PCIDevice representing the
controller on the PCIBus it exposes?
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
- Re: [Qemu-devel] [PATCH v2 10/10] qdev: Do not let the user try to device_add when it cannot work, (continued)
[Qemu-devel] [PATCH v2 01/10] qdev: Replace no_user by cannot_instantiate_with_device_add_yet, armbru, 2013/10/29
[Qemu-devel] [PATCH v2 09/10] isa: Clean up use of cannot_instantiate_with_device_add_yet, armbru, 2013/10/29
[Qemu-devel] [PATCH v2 05/10] pci-host: Consistently set cannot_instantiate_with_device_add_yet, armbru, 2013/10/29
[Qemu-devel] [PATCH v2 07/10] piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet, armbru, 2013/10/29