qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 48/48] qemu-iotests: filter QEMU monitor \r\n


From: Stefan Hajnoczi
Subject: [Qemu-devel] [PULL 48/48] qemu-iotests: filter QEMU monitor \r\n
Date: Fri, 6 Dec 2013 17:36:47 +0100

SMTP does not preserve newlines.  This is normally not a problem if the
email body uses DOS or UNIX newlines consistently.  In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).

This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.

The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.

Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 tests/qemu-iotests/051.out       | 112 +++++++++++++++++++--------------------
 tests/qemu-iotests/common.filter |   3 +-
 2 files changed, 58 insertions(+), 57 deletions(-)

diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index ddef87c..49e95a2 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -39,12 +39,12 @@ ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
 === Enable and disable lazy refcounting on the command line, plus some invalid 
values ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: could 
not open disk image TEST_DIR/t.qcow2: Parameter 'lazy-refcounts' expects 'on' 
or 'off'
@@ -63,71 +63,71 @@ Testing: -drive 
file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could 
not open disk image TEST_DIR/t.qcow2: Lazy refcounts require a qcow2 image with 
at least qemu 1.1 compatibility level
 
 Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 
 === No medium ===
 
 Testing: -drive if=floppy
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=ide,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=scsi,media=cdrom
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=ide
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: Device needs media, but drive is empty
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive if=virtio
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
 QEMU_PROG: -drive if=virtio: Device initialization failed.
 QEMU_PROG: -drive if=virtio: Device initialization failed.
 QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
 
 Testing: -drive if=scsi
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device lsi53c895a failed
 
 Testing: -drive if=none,id=disk -device ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive if=none,id=disk -device ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive 
is empty
 QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be 
initialized
 
 Testing: -drive if=none,id=disk -device ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is 
empty
 QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive 
is empty
 QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be 
initialized
 
 Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is 
empty
 QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be 
initialized
@@ -136,81 +136,81 @@ QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' 
could not be initialized
 === Read-only ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: Can't use a read-only drive
 QEMU_PROG: Device initialization failed.
 QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-cd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-drive,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
 QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be 
initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
ide-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
 QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
 QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-disk,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device 
lsi53c895a -device scsi-hd,drive=disk
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 
 === Cache modes ===
 
 Testing: -drive media=cdrom,cache=none
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=directsync
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=writeback
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=writethrough
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=unsafe
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive media=cdrom,cache=invalid_value
 QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid cache option
@@ -219,8 +219,8 @@ QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid 
cache option
 === Specifying the protocol layer ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
 
 Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
 QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: could not open disk 
image TEST_DIR/t.qcow2: Can't use 'qcow2' as a block driver for the protocol 
level
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 9c82c77..776985d 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -157,7 +157,8 @@ _filter_qemu_io()
 _filter_qemu()
 {
     sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
-        -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#'
+        -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
+        -e $'s#\r##' # QEMU monitor uses \r\n line endings
 }
 
 # replace problematic QMP output like timestamps
-- 
1.8.4.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]