[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 06/13] mxs/imx23: Add digctl driver
From: |
Michel Pollet |
Subject: |
[Qemu-devel] [PATCH 06/13] mxs/imx23: Add digctl driver |
Date: |
Wed, 11 Dec 2013 13:56:25 +0000 |
This implements just enough of the digctl IO block to allow
linux to believe it's running on (currently only) an imx23.
Signed-off-by: Michel Pollet <address@hidden>
---
hw/arm/Makefile.objs | 1 +
hw/arm/imx23_digctl.c | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 hw/arm/imx23_digctl.c
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 78b5614..9adcb96 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -5,3 +5,4 @@ obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o
z2.o
obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
obj-y += omap1.o omap2.o strongarm.o
+obj-$(CONFIG_MXS) += imx23_digctl.o
diff --git a/hw/arm/imx23_digctl.c b/hw/arm/imx23_digctl.c
new file mode 100644
index 0000000..b7cd1ff
--- /dev/null
+++ b/hw/arm/imx23_digctl.c
@@ -0,0 +1,110 @@
+/*
+ * imx23_digctl.c
+ *
+ * Copyright: Michel Pollet <address@hidden>
+ *
+ * QEMU Licence
+ */
+
+/*
+ * This module implements a very basic IO block for the digctl of the imx23
+ * Basically there is no real logic, just constant registers return, the most
+ * used one bing the "chip id" that is used by the various linux drivers
+ * to differentiate between imx23 and 28.
+ *
+ * The module consists mostly of read/write registers that the bootloader and
+ * kernel are quite happy to 'set' to whatever value they believe they set...
+ */
+
+#include "hw/sysbus.h"
+#include "hw/arm/mxs.h"
+
+enum {
+ HW_DIGCTL_RAMCTL = 0x3,
+ HW_DIGCTL_CHIPID = 0x31,
+};
+
+typedef struct imx23_digctl_state {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t reg[0x2000 / 4];
+} imx23_digctl_state;
+
+static uint64_t imx23_digctl_read(
+ void *opaque, hwaddr offset, unsigned size)
+{
+ imx23_digctl_state *s = (imx23_digctl_state *)opaque;
+ uint32_t res = 0;
+
+ switch (offset >> 4) {
+ case 0 ... 0x2000/4:
+ res = s->reg[offset >> 4];
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: bad offset 0x%x\n", __func__, (int)offset);
+ return 0;
+ }
+ return res;
+}
+
+static void imx23_digctl_write(
+ void *opaque, hwaddr offset, uint64_t value, unsigned size)
+{
+ imx23_digctl_state *s = (imx23_digctl_state *) opaque;
+ uint32_t * dst = NULL;
+
+ switch (offset >> 4) {
+ case 0 ... 0x2000 / 4:
+ dst = &s->reg[(offset >> 4)];
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: bad offset 0x%x\n", __func__, (int) offset);
+ return;
+ }
+ if (!dst) {
+ return;
+ }
+ mxs_write(dst, offset, value, size);
+}
+
+static const MemoryRegionOps imx23_digctl_ops = {
+ .read = imx23_digctl_read,
+ .write = imx23_digctl_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int imx23_digctl_init(SysBusDevice *dev)
+{
+ imx23_digctl_state *s = OBJECT_CHECK(imx23_digctl_state, dev,
"imx23_digctl");
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &imx23_digctl_ops, s,
+ "imx23_digctl", 0x2000);
+ sysbus_init_mmio(dev, &s->iomem);
+ s->reg[HW_DIGCTL_RAMCTL] = 0x6d676953; /* default reset value */
+ s->reg[HW_DIGCTL_CHIPID] = 0x37800000; /* i.mX233 */
+ return 0;
+}
+
+static void imx23_digctl_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = imx23_digctl_init;
+}
+
+static TypeInfo digctl_info = {
+ .name = "imx23_digctl",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(imx23_digctl_state),
+ .class_init = imx23_digctl_class_init,
+};
+
+static void imx23_digctl_register(void)
+{
+ type_register_static(&digctl_info);
+}
+
+type_init(imx23_digctl_register)
--
1.8.5.1
- [Qemu-devel] [PATCH 00/13] Freescale mxs/imx23 + Olimex Olinuxino support, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 03/13] mxs/imx23: Add uart driver, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 01/13] mxs/imx23: Add main header file, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 07/13] mxs/imx23: Implements the pin mux, GPIOs, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 06/13] mxs/imx23: Add digctl driver,
Michel Pollet <=
- [Qemu-devel] [PATCH 08/13] mxs/imx23: Add SSP/SPI driver, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 04/13] mxs/imx23: Add DMA driver, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 05/13] mxs/imx23: Add the interrupt collector, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 09/13] mxs/imx23: Add the RTC block, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 02/13] mxs: Add CONFIG_MXS to the arm-softmmu config, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 13/13] mxs/imx23: Adds support for an Olinuxino board, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 12/13] mxs/imx23: Main core instantiation and minor IO blocks, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 11/13] mxs/imx23: Add the USB driver, Michel Pollet, 2013/12/11
- [Qemu-devel] [PATCH 10/13] mxs/imx23: Add the timers, Michel Pollet, 2013/12/11
- Re: [Qemu-devel] [PATCH 00/13] Freescale mxs/imx23 + Olimex Olinuxino support, M P, 2013/12/13