Re: [Qemu-devel] [PATCH 00/12] qdev: cleanup legacy properties

[Igor Mammedov]

On Thu, 30 Jan 2014 14:09:42 +0100
Paolo Bonzini <address@hidden> wrote:

> The conversion of qdev to QOM brought with it legacy properties.
> Legacy properties are always have a string type (the accessors always
> call visit_type_str), and were used to support -device syntax while
> keeping QOM properties strongly typed.  For example, an hex8 property
> is registered twice, once as an integer-typed property and once as a
> legacy property that enforces base 16 for its input.
> 
> However, when introducing legacy properties, the hex8/32/64 had a small
> change applied: the previously-optional "0x" prefix became mandatory,
> and an error was raised if you omitted it.  This was in preparation
> for making the legacy properties read-only, and changing the hex8/32/64
> properties to uint8/32/64.  This series does exactly this in patches 1-6.
> 
> On the printing side, legacy properties are used by "info qtree" to
> tweak its presentation: strings are quoted, hex8/32/64 properties are
> printed in hexadecimal, and so on.  In this series, patches 7-10 add a
> "human" mode to StringOutputVisitors.  This mode employs a slightly
> different presentation, more suitable for human consumption, but its
> output cannot be sent back to a StringInputVisitor.  The main change
> is that numbers are printed in both decimal and 0x-prefixed hexadecimal.
> This lets us drop hex8/32/64 property types.
> 
> Finally, patches 11-12 clean up the type names used for properties.
> These are always QAPI names, so that in the future QOM introspection
> can piggyback on QAPI introspection for describing property types.
> 
> Paolo Bonzini (12):
>   qapi: add size parser to StringInputVisitor
>   qdev: sizes are now parsed by StringInputVisitor
>   qdev: remove legacy parsers for hex8/32/64
>   qdev: legacy properties are now read-only
>   qdev: legacy properties are just strings
>   qdev: inline qdev_prop_parse
>   qapi: add human mode to StringOutputVisitor
>   qdev: use human mode in "info qtree"
>   qdev: remove most legacy printers
>   qdev: remove hex8/32/64 property types
>   qdev: add enum property types to QAPI schema
>   qdev: use QAPI type names for properties
> 
>  hw/audio/adlib.c                     |   2 +-
>  hw/audio/cs4231a.c                   |   2 +-
>  hw/audio/gus.c                       |   2 +-
>  hw/audio/pcspk.c                     |   2 +-
>  hw/audio/sb16.c                      |   4 +-
>  hw/block/fdc.c                       |   2 +-
>  hw/char/debugcon.c                   |   4 +-
>  hw/char/parallel.c                   |   2 +-
>  hw/char/serial-isa.c                 |   2 +-
>  hw/core/qdev-properties-system.c     |  12 ++-
>  hw/core/qdev-properties.c            | 204 
> +++--------------------------------
>  hw/core/qdev.c                       |  38 +------
>  hw/display/g364fb.c                  |   2 +-
>  hw/display/tcx.c                     |   4 +-
>  hw/dma/i82374.c                      |   2 +-
>  hw/dma/sun4m_iommu.c                 |   2 +-
>  hw/i386/kvm/i8254.c                  |   8 +-
>  hw/ide/isa.c                         |   4 +-
>  hw/ide/qdev.c                        |   2 +-
>  hw/intc/i8259_common.c               |   6 +-
>  hw/isa/pc87312.c                     |   2 +-
>  hw/misc/applesmc.c                   |   2 +-
>  hw/misc/debugexit.c                  |   4 +-
>  hw/misc/eccmemctl.c                  |   2 +-
>  hw/net/ne2000-isa.c                  |   2 +-
>  hw/nvram/fw_cfg.c                    |   4 +-
>  hw/ppc/spapr_pci.c                   |  16 +--
>  hw/scsi/megasas.c                    |   2 +-
>  hw/scsi/scsi-disk.c                  |   6 +-
>  hw/sd/sdhci.c                        |   4 +-
>  hw/timer/i8254.c                     |   2 +-
>  hw/timer/m48t59.c                    |   4 +-
>  hw/timer/mc146818rtc.c               |  14 +--
>  hw/usb/host-libusb.c                 |   4 +-
>  hw/virtio/virtio-pci.c               |   6 +-
>  include/hw/block/block.h             |   6 --
>  include/hw/qdev-core.h               |   1 -
>  include/hw/qdev-dma.h                |   2 +-
>  include/hw/qdev-properties.h         |  11 --
>  include/qapi/string-output-visitor.h |   2 +-
>  include/qemu-common.h                |   8 --
>  include/qom/object.h                 |   3 +-
>  qapi-schema.json                     |  58 ++++++++++
>  qapi/string-input-visitor.c          |  24 +++++
>  qapi/string-output-visitor.c         |  55 +++++++++-
>  qdev-monitor.c                       |   6 +-
>  qom/object.c                         |   4 +-
>  tests/test-string-output-visitor.c   |   2 +-
>  tests/test-visitor-serialization.c   |   2 +-
>  49 files changed, 235 insertions(+), 329 deletions(-)
> 

with fixed checkpatch error in 13/12
Reviewed-By: Igor Mammedov <address@hidden>