[Qemu-devel] [PATCH v5 10/11] spapr-vfio: add spapr-pci-vfio-host-bridge to support vfio

[Alexey Kardashevskiy]

The patch adds a spapr-pci-vfio-host-bridge device type
which is a PCI Host Bridge with VFIO support. The new device
inherits from the spapr-pci-host-bridge device and adds
the following properties:
        iommu - IOMMU group ID which represents a Partitionable
                Endpoint, QEMU/ppc64 uses a separate PHB for
                an IOMMU group so the guest kernel has to have
                PCI Domain support enabled.
        forceaddr (optional, 0 by default) - forces QEMU to copy
                device:function from the host address as
                certain guest drivers expect devices to appear in
                particular locations;
        mf (optional, 0 by default) - forces multifunction bit for
                the function #0 of a found device, only makes sense
                for multifunction devices and only with the forceaddr
                property set. It would not be required if there
                was a way to know in advance whether a device is
                multifunctional or not.
        scan (optional, 1 by default) - if non-zero, the new PHB walks
                through all non-bridge devices in the group and tries
                adding them to the PHB; if zero, all devices in the group
                have to be configured manually via the QEMU command line.

Examples of use:
1) Scan and add all devices from IOMMU group with ID=1 to QEMU's PHB #6:
        -device spapr-pci-vfio-host-bridge,id=DEVICENAME,iommu=1,index=6

2) Configure and Add 3 functions of a multifunctional device to QEMU:
(the NEC PCI USB card is used as an example here):
        -device spapr-pci-vfio-host-bridge,id=USB,iommu=4,scan=0,index=7 \
        -device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
        -device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
        -device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB

Signed-off-by: Alexey Kardashevskiy <address@hidden>
---
Changes:
v5:
* added handling of possible failure of spapr_vfio_new_table()

v4:
* moved IOMMU changes to separate patches
* moved spapr-pci-vfio-host-bridge to new file
---
 hw/ppc/Makefile.objs        |   2 +-
 hw/ppc/spapr_pci_vfio.c     | 206 ++++++++++++++++++++++++++++++++++++++++++++
 include/hw/pci-host/spapr.h |  13 +++
 3 files changed, 220 insertions(+), 1 deletion(-)
 create mode 100644 hw/ppc/spapr_pci_vfio.c

diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index ea747f0..2239192 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -3,7 +3,7 @@ obj-y += ppc.o ppc_booke.o
 # IBM pSeries (sPAPR)
 obj-$(CONFIG_PSERIES) += spapr.o spapr_vio.o spapr_events.o
 obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o spapr_rtas.o
-obj-$(CONFIG_PSERIES) += spapr_pci.o
+obj-$(CONFIG_PSERIES) += spapr_pci.o spapr_pci_vfio.o
 # PowerPC 4xx boards
 obj-y += ppc405_boards.o ppc4xx_devs.o ppc405_uc.o ppc440_bamboo.o
 obj-y += ppc4xx_pci.o
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
new file mode 100644
index 0000000..40f6673
--- /dev/null
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -0,0 +1,206 @@
+/*
+ * QEMU sPAPR PCI host for VFIO
+ *
+ * Copyright (c) 2011 Alexey Kardashevskiy, IBM Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include <sys/types.h>
+#include <dirent.h>
+
+#include "hw/hw.h"
+#include "hw/ppc/spapr.h"
+#include "hw/pci-host/spapr.h"
+#include "hw/misc/vfio.h"
+#include "hw/pci/pci_bus.h"
+#include "trace.h"
+#include "qemu/error-report.h"
+
+/* sPAPR VFIO */
+static Property spapr_phb_vfio_properties[] = {
+    DEFINE_PROP_INT32("iommu", sPAPRPHBVFIOState, iommugroupid, -1),
+    DEFINE_PROP_UINT8("scan", sPAPRPHBVFIOState, scan, 1),
+    DEFINE_PROP_UINT8("mf", sPAPRPHBVFIOState, enable_multifunction, 0),
+    DEFINE_PROP_UINT8("forceaddr", sPAPRPHBVFIOState, force_addr, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void spapr_pci_vfio_scan(sPAPRPHBVFIOState *svphb, Error **errp)
+{
+    PCIHostState *phb = PCI_HOST_BRIDGE(svphb);
+    char *iommupath;
+    DIR *dirp;
+    struct dirent *entry;
+    Error *error = NULL;
+
+    if (!svphb->scan) {
+        trace_spapr_pci("autoscan disabled for ", svphb->phb.dtbusname);
+        return;
+    }
+
+    iommupath = g_strdup_printf("/sys/kernel/iommu_groups/%d/devices/",
+                                svphb->iommugroupid);
+    if (!iommupath) {
+        return;
+    }
+
+    dirp = opendir(iommupath);
+    if (!dirp) {
+        error_report("spapr-vfio: vfio scan failed on opendir: %m");
+        g_free(iommupath);
+        return;
+    }
+
+    while ((entry = readdir(dirp)) != NULL) {
+        Error *err = NULL;
+        char *tmp;
+        FILE *deviceclassfile;
+        unsigned deviceclass = 0, domainid, busid, devid, fnid;
+        char addr[32];
+        DeviceState *dev;
+
+        if (sscanf(entry->d_name, "%X:%X:%X.%x",
+                   &domainid, &busid, &devid, &fnid) != 4) {
+            continue;
+        }
+
+        tmp = g_strdup_printf("%s%s/class", iommupath, entry->d_name);
+        trace_spapr_pci("Reading device class from ", tmp);
+
+        deviceclassfile = fopen(tmp, "r");
+        if (deviceclassfile) {
+            int ret = fscanf(deviceclassfile, "%x", &deviceclass);
+            fclose(deviceclassfile);
+            if (ret != 1) {
+                continue;
+            }
+        }
+        g_free(tmp);
+
+        if (!deviceclass) {
+            continue;
+        }
+        if ((deviceclass >> 16) == (PCI_CLASS_BRIDGE_OTHER >> 8)) {
+            /* Skip bridges */
+            continue;
+        }
+        trace_spapr_pci("Creating device from ", entry->d_name);
+
+        dev = qdev_create(&phb->bus->qbus, "vfio-pci");
+        if (!dev) {
+            trace_spapr_pci("failed to create vfio-pci", entry->d_name);
+            continue;
+        }
+        object_property_parse(OBJECT(dev), entry->d_name, "host", &err);
+        if (err != NULL) {
+            object_unref(OBJECT(dev));
+            continue;
+        }
+        if (svphb->force_addr) {
+            snprintf(addr, sizeof(addr), "%x.%x", devid, fnid);
+            err = NULL;
+            object_property_parse(OBJECT(dev), addr, "addr", &err);
+            if (err != NULL) {
+                object_unref(OBJECT(dev));
+                continue;
+            }
+        }
+        if (svphb->enable_multifunction) {
+            qdev_prop_set_bit(dev, "multifunction", 1);
+        }
+        object_property_set_bool(OBJECT(dev), true, "realized", &error);
+        if (error) {
+            object_unref(OBJECT(dev));
+            error_propagate(errp, error);
+            break;
+        }
+    }
+    closedir(dirp);
+    g_free(iommupath);
+}
+
+static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
+    int ret;
+    Error *error = NULL;
+
+    if (svphb->iommugroupid == -1) {
+        error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid);
+        return;
+    }
+
+    svphb->phb.tcet = spapr_vfio_new_table(DEVICE(sphb), svphb->phb.dma_liobn);
+
+    if (!svphb->phb.tcet) {
+        error_setg(errp, "spapr-vfio: failed to create VFIO TCE table");
+        return;
+    }
+
+    address_space_init(&sphb->iommu_as, spapr_tce_get_iommu(sphb->tcet),
+                       sphb->dtbusname);
+
+    ret = vfio_container_spapr_get_info(&svphb->phb.iommu_as,
+                                        sphb->dma_liobn, svphb->iommugroupid,
+                                        &info);
+    if (ret) {
+        error_setg_errno(errp, -ret,
+                         "spapr-vfio: get info from container failed");
+        return;
+    }
+
+    svphb->phb.dma_window_start = info.dma32_window_start;
+    svphb->phb.dma_window_size = info.dma32_window_size;
+
+    spapr_pci_vfio_scan(svphb, &error);
+    if (error) {
+        error_propagate(errp, error);
+    }
+}
+
+static void spapr_phb_vfio_reset(DeviceState *qdev)
+{
+    /* Do nothing */
+}
+
+static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
+
+    dc->props = spapr_phb_vfio_properties;
+    dc->reset = spapr_phb_vfio_reset;
+    spc->finish_realize = spapr_phb_vfio_finish_realize;
+}
+
+static const TypeInfo spapr_phb_vfio_info = {
+    .name          = TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE,
+    .parent        = TYPE_SPAPR_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(sPAPRPHBVFIOState),
+    .class_init    = spapr_phb_vfio_class_init,
+    .class_size    = sizeof(sPAPRPHBClass),
+};
+
+static void spapr_pci_vfio_register_types(void)
+{
+    type_register_static(&spapr_phb_vfio_info);
+}
+
+type_init(spapr_pci_vfio_register_types)
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 0f428a1..18acb67 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -30,10 +30,14 @@
 #define SPAPR_MSIX_MAX_DEVS 32
 
 #define TYPE_SPAPR_PCI_HOST_BRIDGE "spapr-pci-host-bridge"
+#define TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE "spapr-pci-vfio-host-bridge"
 
 #define SPAPR_PCI_HOST_BRIDGE(obj) \
     OBJECT_CHECK(sPAPRPHBState, (obj), TYPE_SPAPR_PCI_HOST_BRIDGE)
 
+#define SPAPR_PCI_VFIO_HOST_BRIDGE(obj) \
+    OBJECT_CHECK(sPAPRPHBVFIOState, (obj), TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE)
+
 #define SPAPR_PCI_HOST_BRIDGE_CLASS(klass) \
      OBJECT_CLASS_CHECK(sPAPRPHBClass, (klass), TYPE_SPAPR_PCI_HOST_BRIDGE)
 #define SPAPR_PCI_HOST_BRIDGE_GET_CLASS(obj) \
@@ -41,6 +45,7 @@
 
 typedef struct sPAPRPHBClass sPAPRPHBClass;
 typedef struct sPAPRPHBState sPAPRPHBState;
+typedef struct sPAPRPHBVFIOState sPAPRPHBVFIOState;
 
 struct sPAPRPHBClass {
     PCIHostBridgeClass parent_class;
@@ -78,6 +83,14 @@ struct sPAPRPHBState {
     QLIST_ENTRY(sPAPRPHBState) list;
 };
 
+struct sPAPRPHBVFIOState {
+    sPAPRPHBState phb;
+
+    struct VFIOContainer *container;
+    int32_t iommugroupid;
+    uint8_t scan, enable_multifunction, force_addr;
+};
+
 #define SPAPR_PCI_BASE_BUID          0x800000020000000ULL
 
 #define SPAPR_PCI_WINDOW_BASE        0x10000000000ULL
-- 
1.8.4.rc4