qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 09/18] block/ssh: Propagate errors to open and c


From: Richard W.M. Jones
Subject: Re: [Qemu-devel] [PATCH 09/18] block/ssh: Propagate errors to open and create methods
Date: Wed, 14 May 2014 15:58:00 +0100
User-agent: Mutt/1.5.20 (2009-12-10)

On Tue, May 13, 2014 at 06:02:43PM +0200, Markus Armbruster wrote:
> Completes the conversion to Error started in commit 015a103^..d5124c0.
> 
> Cc: "Richard W.M. Jones" <address@hidden>
> Signed-off-by: Markus Armbruster <address@hidden>

Reviewed-by: Richard W.M. Jones <address@hidden>

>  block/ssh.c | 47 ++++++++++++++++++++++-------------------------
>  1 file changed, 22 insertions(+), 25 deletions(-)
> 
> diff --git a/block/ssh.c b/block/ssh.c
> index 26078c4..b212971 100644
> --- a/block/ssh.c
> +++ b/block/ssh.c
> @@ -131,29 +131,34 @@ session_error_setg(Error **errp, BDRVSSHState *s, const 
> char *fs, ...)
>      g_free(msg);
>  }
>  
> -/* Wrappers around error_report which make sure to dump as much
> - * information from libssh2 as possible.
> - */
> -static void GCC_FMT_ATTR(2, 3)
> -session_error_report(BDRVSSHState *s, const char *fs, ...)
> +static void GCC_FMT_ATTR(3, 4)
> +sftp_error_setg(Error **errp, BDRVSSHState *s, const char *fs, ...)
>  {
>      va_list args;
> +    char *msg;
>  
>      va_start(args, fs);
> -    error_vprintf(fs, args);
> +    msg = g_strdup_vprintf(fs, args);
> +    va_end(args);
>  
> -    if ((s)->session) {
> +    if (s->sftp) {
>          char *ssh_err;
>          int ssh_err_code;
> +        unsigned long sftp_err_code;
>  
>          /* This is not an errno.  See <libssh2.h>. */
>          ssh_err_code = libssh2_session_last_error(s->session,
>                                                    &ssh_err, NULL, 0);
> -        error_printf(": %s (libssh2 error code: %d)", ssh_err, ssh_err_code);
> -    }
> +        /* See <libssh2_sftp.h>. */
> +        sftp_err_code = libssh2_sftp_last_error((s)->sftp);
>  
> -    va_end(args);
> -    error_printf("\n");
> +        error_setg(errp,
> +                   "%s: %s (libssh2 error code: %d, sftp error code: %lu)",
> +                   msg, ssh_err, ssh_err_code, sftp_err_code);
> +    } else {
> +        error_setg(errp, "%s", msg);
> +    }
> +    g_free(msg);
>  }
>  
>  static void GCC_FMT_ATTR(2, 3)
> @@ -594,14 +599,14 @@ static int connect_to_ssh(BDRVSSHState *s, QDict 
> *options,
>              path, ssh_flags, creat_mode);
>      s->sftp_handle = libssh2_sftp_open(s->sftp, path, ssh_flags, creat_mode);
>      if (!s->sftp_handle) {
> -        session_error_report(s, "failed to open remote file '%s'", path);
> +        session_error_setg(errp, s, "failed to open remote file '%s'", path);
>          ret = -EINVAL;
>          goto err;
>      }
>  
>      r = libssh2_sftp_fstat(s->sftp_handle, &s->attrs);
>      if (r < 0) {
> -        sftp_error_report(s, "failed to read file attributes");
> +        sftp_error_setg(errp, s, "failed to read file attributes");
>          return -EINVAL;
>      }
>  
> @@ -639,7 +644,6 @@ static int connect_to_ssh(BDRVSSHState *s, QDict *options,
>  static int ssh_file_open(BlockDriverState *bs, QDict *options, int 
> bdrv_flags,
>                           Error **errp)
>  {
> -    Error *local_err = NULL;
>      BDRVSSHState *s = bs->opaque;
>      int ret;
>      int ssh_flags;
> @@ -652,10 +656,8 @@ static int ssh_file_open(BlockDriverState *bs, QDict 
> *options, int bdrv_flags,
>      }
>  
>      /* Start up SSH. */
> -    ret = connect_to_ssh(s, options, ssh_flags, 0, &local_err);
> +    ret = connect_to_ssh(s, options, ssh_flags, 0, errp);
>      if (ret < 0) {
> -        qerror_report_err(local_err);
> -        error_free(local_err);
>          goto err;
>      }
>  
> @@ -686,7 +688,6 @@ static int ssh_create(const char *filename, 
> QEMUOptionParameter *options,
>                        Error **errp)
>  {
>      int r, ret;
> -    Error *local_err = NULL;
>      int64_t total_size = 0;
>      QDict *uri_options = NULL;
>      BDRVSSHState s;
> @@ -705,10 +706,8 @@ static int ssh_create(const char *filename, 
> QEMUOptionParameter *options,
>      DPRINTF("total_size=%" PRIi64, total_size);
>  
>      uri_options = qdict_new();
> -    r = parse_uri(filename, uri_options, &local_err);
> +    r = parse_uri(filename, uri_options, errp);
>      if (r < 0) {
> -        qerror_report_err(local_err);
> -        error_free(local_err);
>          ret = r;
>          goto out;
>      }
> @@ -716,10 +715,8 @@ static int ssh_create(const char *filename, 
> QEMUOptionParameter *options,
>      r = connect_to_ssh(&s, uri_options,
>                         LIBSSH2_FXF_READ|LIBSSH2_FXF_WRITE|
>                         LIBSSH2_FXF_CREAT|LIBSSH2_FXF_TRUNC,
> -                       0644, &local_err);
> +                       0644, errp);
>      if (r < 0) {
> -        qerror_report_err(local_err);
> -        error_free(local_err);
>          ret = r;
>          goto out;
>      }
> @@ -728,7 +725,7 @@ static int ssh_create(const char *filename, 
> QEMUOptionParameter *options,
>          libssh2_sftp_seek64(s.sftp_handle, total_size-1);
>          r2 = libssh2_sftp_write(s.sftp_handle, c, 1);
>          if (r2 < 0) {
> -            sftp_error_report(&s, "truncate failed");
> +            sftp_error_setg(errp, &s, "truncate failed");
>              ret = -EINVAL;
>              goto out;
>          }
> -- 
> 1.8.1.4

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine.  Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/



reply via email to

[Prev in Thread] Current Thread [Next in Thread]