[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v1 36/72] qapi: Extract drive-mirror definition into
From: |
Benoît Canet |
Subject: |
[Qemu-devel] [PATCH v1 36/72] qapi: Extract drive-mirror definition into qapi/block-core.json |
Date: |
Sat, 31 May 2014 13:51:15 +0200 |
Signed-off-by: Benoit Canet <address@hidden>
---
qapi-schema.json | 51 ---------------------------------------------------
qapi/block-core.json | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index a671db7..b869ab9 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1338,57 +1338,6 @@
'returns': 'str' }
##
-# @drive-mirror
-#
-# Start mirroring a block device's writes to a new destination.
-#
-# @device: the name of the device whose writes should be mirrored.
-#
-# @target: the target of the new image. If the file exists, or if it
-# is a device, the existing file/device will be used as the new
-# destination. If it does not exist, a new file will be created.
-#
-# @format: #optional the format of the new destination, default is to
-# probe if @mode is 'existing', else the format of the source
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
-#
-# @speed: #optional the maximum speed, in bytes per second
-#
-# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
-#
-# @granularity: #optional granularity of the dirty bitmap, default is 64K
-# if the image format doesn't have clusters, 4K if the clusters
-# are smaller than that, else the cluster size. Must be a
-# power of 2 between 512 and 64M (since 1.4).
-#
-# @buf-size: #optional maximum amount of data in flight from source to
-# target (since 1.4).
-#
-# @on-source-error: #optional the action to take on an error on the source,
-# default 'report'. 'stop' and 'enospc' can only be used
-# if the block device supports io-status (see BlockInfo).
-#
-# @on-target-error: #optional the action to take on an error on the target,
-# default 'report' (no limitations, since this applies to
-# a different block device than @device).
-#
-# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
-#
-# Since 1.3
-##
-{ 'command': 'drive-mirror',
- 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
- 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
- '*speed': 'int', '*granularity': 'uint32',
- '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
- '*on-target-error': 'BlockdevOnError' } }
-
-##
# @migrate_cancel
#
# Cancel the current executing migration process.
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 319b741..b75bccb 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -751,3 +751,54 @@
##
{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
+##
+# @drive-mirror
+#
+# Start mirroring a block device's writes to a new destination.
+#
+# @device: the name of the device whose writes should be mirrored.
+#
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+# probe if @mode is 'existing', else the format of the source
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+# 'absolute-paths'.
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @granularity: #optional granularity of the dirty bitmap, default is 64K
+# if the image format doesn't have clusters, 4K if the clusters
+# are smaller than that, else the cluster size. Must be a
+# power of 2 between 512 and 64M (since 1.4).
+#
+# @buf-size: #optional maximum amount of data in flight from source to
+# target (since 1.4).
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Returns: nothing on success
+# If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.3
+##
+{ 'command': 'drive-mirror',
+ 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+ 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+ '*speed': 'int', '*granularity': 'uint32',
+ '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
--
1.9.1
- [Qemu-devel] [PATCH v1 25/72] qapi: Extract BlockJobInfo definition into qapi/block-core.json, (continued)
- [Qemu-devel] [PATCH v1 25/72] qapi: Extract BlockJobInfo definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 24/72] qapi: Extract BlockJobType definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 18/72] qapi: Extract query-block definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 28/72] qapi: Extract block_resize definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 30/72] qapi: Extract BlockdevSnapshot definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 29/72] qapi: Extract NewImageMode definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 32/72] qapi: Extract blockdev-snapshot-sync into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 31/72] qapi: Extract DriveBackup definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 34/72] qapi: Extract drive-backup definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 38/72] qapi: Extract block-stream definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 36/72] qapi: Extract drive-mirror definition into qapi/block-core.json,
Benoît Canet <=
- [Qemu-devel] [PATCH v1 35/72] qapi: Extract query-named-block-nodes definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 33/72] qapi: Extract block-commit definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 37/72] qapi: Extract block_set_io_throttle definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 41/72] qapi: Extract block-job-pause definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 40/72] qapi: Extrat block-job-cancel definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 39/72] qapi: Extract block-job-set-speed definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 43/72] qapi: Extract block-job-complete definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 42/72] qapi: Extract block-job-resume definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 46/72] qapi: Extract BlockdevDetectZeroesOptions definition into qapi/block-core.json, Benoît Canet, 2014/05/31
- [Qemu-devel] [PATCH v1 44/72] qapi: Extract drive-mirror-replace definition into qapi/block-core.json, Benoît Canet, 2014/05/31