qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2 3/5] qapi: Extract qapi/block-core.json definitio


From: Benoît Canet
Subject: [Qemu-devel] [PATCH v2 3/5] qapi: Extract qapi/block-core.json definitions
Date: Thu, 5 Jun 2014 13:45:31 +0200

Signed-off-by: Benoit Canet <address@hidden
---
 qapi-schema.json     | 1428 +-------------------------------------------------
 qapi/block-core.json | 1406 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 1417 insertions(+), 1417 deletions(-)

diff --git a/qapi-schema.json b/qapi-schema.json
index 7d47f4d..c888d23 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -184,179 +184,6 @@
             'guest-panicked' ] }
 
 ##
-# @SnapshotInfo
-#
-# @id: unique snapshot id
-#
-# @name: user chosen name
-#
-# @vm-state-size: size of the VM state
-#
-# @date-sec: UTC date of the snapshot in seconds
-#
-# @date-nsec: fractional part in nano seconds to be used with date-sec
-#
-# @vm-clock-sec: VM clock relative to boot in seconds
-#
-# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec
-#
-# Since: 1.3
-#
-##
-
-{ 'type': 'SnapshotInfo',
-  'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
-            'date-sec': 'int', 'date-nsec': 'int',
-            'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } }
-
-##
-# @ImageInfoSpecificQCow2:
-#
-# @compat: compatibility level
-#
-# @lazy-refcounts: #optional on or off; only valid for compat >= 1.1
-#
-# Since: 1.7
-##
-{ 'type': 'ImageInfoSpecificQCow2',
-  'data': {
-      'compat': 'str',
-      '*lazy-refcounts': 'bool'
-  } }
-
-##
-# @ImageInfoSpecificVmdk:
-#
-# @create-type: The create type of VMDK image
-#
-# @cid: Content id of image
-#
-# @parent-cid: Parent VMDK image's cid
-#
-# @extents: List of extent files
-#
-# Since: 1.7
-##
-{ 'type': 'ImageInfoSpecificVmdk',
-  'data': {
-      'create-type': 'str',
-      'cid': 'int',
-      'parent-cid': 'int',
-      'extents': ['ImageInfo']
-  } }
-
-##
-# @ImageInfoSpecific:
-#
-# A discriminated record of image format specific information structures.
-#
-# Since: 1.7
-##
-
-{ 'union': 'ImageInfoSpecific',
-  'data': {
-      'qcow2': 'ImageInfoSpecificQCow2',
-      'vmdk': 'ImageInfoSpecificVmdk'
-  } }
-
-##
-# @ImageInfo:
-#
-# Information about a QEMU image file
-#
-# @filename: name of the image file
-#
-# @format: format of the image file
-#
-# @virtual-size: maximum capacity in bytes of the image
-#
-# @actual-size: #optional actual size on disk in bytes of the image
-#
-# @dirty-flag: #optional true if image is not cleanly closed
-#
-# @cluster-size: #optional size of a cluster in bytes
-#
-# @encrypted: #optional true if the image is encrypted
-#
-# @compressed: #optional true if the image is compressed (Since 1.7)
-#
-# @backing-filename: #optional name of the backing file
-#
-# @full-backing-filename: #optional full path of the backing file
-#
-# @backing-filename-format: #optional the format of the backing file
-#
-# @snapshots: #optional list of VM snapshots
-#
-# @backing-image: #optional info of the backing image (since 1.6)
-#
-# @format-specific: #optional structure supplying additional format-specific
-# information (since 1.7)
-#
-# Since: 1.3
-#
-##
-
-{ 'type': 'ImageInfo',
-  'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
-           '*actual-size': 'int', 'virtual-size': 'int',
-           '*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool',
-           '*backing-filename': 'str', '*full-backing-filename': 'str',
-           '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
-           '*backing-image': 'ImageInfo',
-           '*format-specific': 'ImageInfoSpecific' } }
-
-##
-# @ImageCheck:
-#
-# Information about a QEMU image file check
-#
-# @filename: name of the image file checked
-#
-# @format: format of the image file checked
-#
-# @check-errors: number of unexpected errors occurred during check
-#
-# @image-end-offset: #optional offset (in bytes) where the image ends, this
-#                    field is present if the driver for the image format
-#                    supports it
-#
-# @corruptions: #optional number of corruptions found during the check if any
-#
-# @leaks: #optional number of leaks found during the check if any
-#
-# @corruptions-fixed: #optional number of corruptions fixed during the check
-#                     if any
-#
-# @leaks-fixed: #optional number of leaks fixed during the check if any
-#
-# @total-clusters: #optional total number of clusters, this field is present
-#                  if the driver for the image format supports it
-#
-# @allocated-clusters: #optional total number of allocated clusters, this
-#                      field is present if the driver for the image format
-#                      supports it
-#
-# @fragmented-clusters: #optional total number of fragmented clusters, this
-#                       field is present if the driver for the image format
-#                       supports it
-#
-# @compressed-clusters: #optional total number of compressed clusters, this
-#                       field is present if the driver for the image format
-#                       supports it
-#
-# Since: 1.4
-#
-##
-
-{ 'type': 'ImageCheck',
-  'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
-           '*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int',
-           '*corruptions-fixed': 'int', '*leaks-fixed': 'int',
-           '*total-clusters': 'int', '*allocated-clusters': 'int',
-           '*fragmented-clusters': 'int', '*compressed-clusters': 'int' } }
-
-##
 # @StatusInfo:
 #
 # Information about VCPU run state
@@ -837,252 +664,6 @@
 { 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] }
 
 ##
-# @BlockDeviceInfo:
-#
-# Information about the backing device for a block device.
-#
-# @file: the filename of the backing device
-#
-# @node-name: #optional the name of the block driver node (Since 2.0)
-#
-# @ro: true if the backing device was open read-only
-#
-# @drv: the name of the block format used to open the backing device. As of
-#       0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
-#       'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
-#       'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow',
-#       'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
-#
-# @backing_file: #optional the name of the backing file (for copy-on-write)
-#
-# @backing_file_depth: number of files in the backing file chain (since: 1.2)
-#
-# @encrypted: true if the backing device is encrypted
-#
-# @encryption_key_missing: true if the backing device is encrypted but an
-#                          valid encryption key is missing
-#
-# @detect_zeroes: detect and optimize zero writes (Since 2.1)
-#
-# @bps: total throughput limit in bytes per second is specified
-#
-# @bps_rd: read throughput limit in bytes per second is specified
-#
-# @bps_wr: write throughput limit in bytes per second is specified
-#
-# @iops: total I/O operations per second is specified
-#
-# @iops_rd: read I/O operations per second is specified
-#
-# @iops_wr: write I/O operations per second is specified
-#
-# @image: the info of image used (since: 1.6)
-#
-# @bps_max: #optional total max in bytes (Since 1.7)
-#
-# @bps_rd_max: #optional read max in bytes (Since 1.7)
-#
-# @bps_wr_max: #optional write max in bytes (Since 1.7)
-#
-# @iops_max: #optional total I/O operations max (Since 1.7)
-#
-# @iops_rd_max: #optional read I/O operations max (Since 1.7)
-#
-# @iops_wr_max: #optional write I/O operations max (Since 1.7)
-#
-# @iops_size: #optional an I/O size in bytes (Since 1.7)
-#
-# Since: 0.14.0
-#
-##
-{ 'type': 'BlockDeviceInfo',
-  'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str',
-            '*backing_file': 'str', 'backing_file_depth': 'int',
-            'encrypted': 'bool', 'encryption_key_missing': 'bool',
-            'detect_zeroes': 'BlockdevDetectZeroesOptions',
-            'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
-            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
-            'image': 'ImageInfo',
-            '*bps_max': 'int', '*bps_rd_max': 'int',
-            '*bps_wr_max': 'int', '*iops_max': 'int',
-            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
-            '*iops_size': 'int' } }
-
-##
-# @BlockDeviceIoStatus:
-#
-# An enumeration of block device I/O status.
-#
-# @ok: The last I/O operation has succeeded
-#
-# @failed: The last I/O operation has failed
-#
-# @nospace: The last I/O operation has failed due to a no-space condition
-#
-# Since: 1.0
-##
-{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
-
-##
-# @BlockDeviceMapEntry:
-#
-# Entry in the metadata map of the device (returned by "qemu-img map")
-#
-# @start: Offset in the image of the first byte described by this entry
-#         (in bytes)
-#
-# @length: Length of the range described by this entry (in bytes)
-#
-# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.)
-#         before reaching one for which the range is allocated.  The value is
-#         in the range 0 to the depth of the image chain - 1.
-#
-# @zero: the sectors in this range read as zeros
-#
-# @data: reading the image will actually read data from a file (in particular,
-#        if @offset is present this means that the sectors are not simply
-#        preallocated, but contain actual data in raw format)
-#
-# @offset: if present, the image file stores the data for this range in
-#          raw format at the given offset.
-#
-# Since 1.7
-##
-{ 'type': 'BlockDeviceMapEntry',
-  'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
-            'data': 'bool', '*offset': 'int' } }
-
-##
-# @BlockDirtyInfo:
-#
-# Block dirty bitmap information.
-#
-# @count: number of dirty bytes according to the dirty bitmap
-#
-# @granularity: granularity of the dirty bitmap in bytes (since 1.4)
-#
-# Since: 1.3
-##
-{ 'type': 'BlockDirtyInfo',
-  'data': {'count': 'int', 'granularity': 'int'} }
-
-##
-# @BlockInfo:
-#
-# Block device information.  This structure describes a virtual device and
-# the backing device associated with it.
-#
-# @device: The device name associated with the virtual device.
-#
-# @type: This field is returned only for compatibility reasons, it should
-#        not be used (always returns 'unknown')
-#
-# @removable: True if the device supports removable media.
-#
-# @locked: True if the guest has locked this device from having its media
-#          removed
-#
-# @tray_open: #optional True if the device has a tray and it is open
-#             (only present if removable is true)
-#
-# @dirty-bitmaps: #optional dirty bitmaps information (only present if the
-#                 driver has one or more dirty bitmaps) (Since 2.0)
-#
-# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
-#             supports it and the VM is configured to stop on errors
-#
-# @inserted: #optional @BlockDeviceInfo describing the device if media is
-#            present
-#
-# Since:  0.14.0
-##
-{ 'type': 'BlockInfo',
-  'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
-           'locked': 'bool', '*inserted': 'BlockDeviceInfo',
-           '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus',
-           '*dirty-bitmaps': ['BlockDirtyInfo'] } }
-
-##
-# @query-block:
-#
-# Get a list of BlockInfo for all virtual block devices.
-#
-# Returns: a list of @BlockInfo describing each virtual block device
-#
-# Since: 0.14.0
-##
-{ 'command': 'query-block', 'returns': ['BlockInfo'] }
-
-##
-# @BlockDeviceStats:
-#
-# Statistics of a virtual block device or a block backing device.
-#
-# @rd_bytes:      The number of bytes read by the device.
-#
-# @wr_bytes:      The number of bytes written by the device.
-#
-# @rd_operations: The number of read operations performed by the device.
-#
-# @wr_operations: The number of write operations performed by the device.
-#
-# @flush_operations: The number of cache flush operations performed by the
-#                    device (since 0.15.0)
-#
-# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds
-#                       (since 0.15.0).
-#
-# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0).
-#
-# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0).
-#
-# @wr_highest_offset: The offset after the greatest byte written to the
-#                     device.  The intended use of this information is for
-#                     growable sparse files (like qcow2) that are used on top
-#                     of a physical device.
-#
-# Since: 0.14.0
-##
-{ 'type': 'BlockDeviceStats',
-  'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int',
-           'wr_operations': 'int', 'flush_operations': 'int',
-           'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int',
-           'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } }
-
-##
-# @BlockStats:
-#
-# Statistics of a virtual block device or a block backing device.
-#
-# @device: #optional If the stats are for a virtual block device, the name
-#          corresponding to the virtual block device.
-#
-# @stats:  A @BlockDeviceStats for the device.
-#
-# @parent: #optional This describes the file block device if it has one.
-#
-# @backing: #optional This describes the backing block device if it has one.
-#           (Since 2.0)
-#
-# Since: 0.14.0
-##
-{ 'type': 'BlockStats',
-  'data': {'*device': 'str', 'stats': 'BlockDeviceStats',
-           '*parent': 'BlockStats',
-           '*backing': 'BlockStats'} }
-
-##
-# @query-blockstats:
-#
-# Query the @BlockStats for all virtual block devices.
-#
-# Returns: A list of @BlockStats for each virtual block devices.
-#
-# Since: 0.14.0
-##
-{ 'command': 'query-blockstats', 'returns': ['BlockStats'] }
-
-##
 # @VncClientInfo:
 #
 # Information about a connected VNC client.
@@ -1421,105 +1002,6 @@
 { 'command': 'query-pci', 'returns': ['PciInfo'] }
 
 ##
-# @BlockdevOnError:
-#
-# An enumeration of possible behaviors for errors on I/O operations.
-# The exact meaning depends on whether the I/O was initiated by a guest
-# or by a block job
-#
-# @report: for guest operations, report the error to the guest;
-#          for jobs, cancel the job
-#
-# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
-#          or BLOCK_JOB_ERROR)
-#
-# @enospc: same as @stop on ENOSPC, same as @report otherwise.
-#
-# @stop: for guest operations, stop the virtual machine;
-#        for jobs, pause the job
-#
-# Since: 1.3
-##
-{ 'enum': 'BlockdevOnError',
-  'data': ['report', 'ignore', 'enospc', 'stop'] }
-
-##
-# @MirrorSyncMode:
-#
-# An enumeration of possible behaviors for the initial synchronization
-# phase of storage mirroring.
-#
-# @top: copies data in the topmost image to the destination
-#
-# @full: copies data from all images to the destination
-#
-# @none: only copy data written from now on
-#
-# Since: 1.3
-##
-{ 'enum': 'MirrorSyncMode',
-  'data': ['top', 'full', 'none'] }
-
-##
-# @BlockJobType:
-#
-# Type of a block job.
-#
-# @commit: block commit job type, see "block-commit"
-#
-# @stream: block stream job type, see "block-stream"
-#
-# @mirror: drive mirror job type, see "drive-mirror"
-#
-# @backup: drive backup job type, see "drive-backup"
-#
-# Since: 1.7
-##
-{ 'enum': 'BlockJobType',
-  'data': ['commit', 'stream', 'mirror', 'backup'] }
-
-##
-# @BlockJobInfo:
-#
-# Information about a long-running block device operation.
-#
-# @type: the job type ('stream' for image streaming)
-#
-# @device: the block device name
-#
-# @len: the maximum progress value
-#
-# @busy: false if the job is known to be in a quiescent state, with
-#        no pending I/O.  Since 1.3.
-#
-# @paused: whether the job is paused or, if @busy is true, will
-#          pause itself as soon as possible.  Since 1.3.
-#
-# @offset: the current progress value
-#
-# @speed: the rate limit, bytes per second
-#
-# @io-status: the status of the job (since 1.3)
-#
-# Since: 1.1
-##
-{ 'type': 'BlockJobInfo',
-  'data': {'type': 'str', 'device': 'str', 'len': 'int',
-           'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int',
-           'io-status': 'BlockDeviceIoStatus'} }
-
-##
-# @query-block-jobs:
-#
-# Return information about long-running block device operations.
-#
-# Returns: a list of @BlockJobInfo for each active block job
-#
-# Since: 1.1
-##
-{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }
-
-##
 # @quit:
 #
 # This command will cause the QEMU process to exit gracefully.  While every
@@ -1699,43 +1181,6 @@
 { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }
 
 ##
-# @block_passwd:
-#
-# This command sets the password of a block device that has not been open
-# with a password and requires one.
-#
-# The two cases where this can happen are a block device is created through
-# QEMU's initial command line or a block device is changed through the legacy
-# @change interface.
-#
-# In the event that the block device is created through the initial command
-# line, the VM will start in the stopped state regardless of whether '-S' is
-# used.  The intention is for a management tool to query the block devices to
-# determine which ones are encrypted, set the passwords with this command, and
-# then start the guest with the @cont command.
-#
-# Either @device or @node-name must be set but not both.
-#
-# @device: #optional the name of the block backend device to set the password 
on
-#
-# @node-name: #optional graph node name to set the password on (Since 2.0)
-#
-# @password: the password to use for the device
-#
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#          If @device is not encrypted, DeviceNotEncrypted
-#
-# Notes:  Not all block formats support encryption and some that do are not
-#         able to validate that a password is correct.  Disk corruption may
-#         occur if an invalid password is specified.
-#
-# Since: 0.14.0
-##
-{ 'command': 'block_passwd', 'data': {'*device': 'str',
-                                      '*node-name': 'str', 'password': 'str'} }
-
-##
 # @balloon:
 #
 # Request the balloon driver to change its balloon size.
@@ -1756,68 +1201,6 @@
 { 'command': 'balloon', 'data': {'value': 'int'} }
 
 ##
-# @block_resize
-#
-# Resize a block image while a guest is running.
-#
-# Either @device or @node-name must be set but not both.
-#
-# @device: #optional the name of the device to get the image resized
-#
-# @node-name: #optional graph node name to get the image resized (Since 2.0)
-#
-# @size:  new image size in bytes
-#
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#
-# Since: 0.14.0
-##
-{ 'command': 'block_resize', 'data': { '*device': 'str',
-                                       '*node-name': 'str',
-                                       'size': 'int' }}
-
-##
-# @NewImageMode
-#
-# An enumeration that tells QEMU how to set the backing file path in
-# a new image file.
-#
-# @existing: QEMU should look for an existing image file.
-#
-# @absolute-paths: QEMU should create a new image with absolute paths
-# for the backing file. If there is no backing file available, the new
-# image will not be backed either.
-#
-# Since: 1.1
-##
-{ 'enum': 'NewImageMode',
-  'data': [ 'existing', 'absolute-paths' ] }
-
-##
-# @BlockdevSnapshot
-#
-# Either @device or @node-name must be set but not both.
-#
-# @device: #optional the name of the device to generate the snapshot from.
-#
-# @node-name: #optional graph node name to generate the snapshot from (Since 
2.0)
-#
-# @snapshot-file: the target of the new image. A new file will be created.
-#
-# @snapshot-node-name: #optional the graph node name of the new image (Since 
2.0)
-#
-# @format: #optional the format of the snapshot image, default is 'qcow2'.
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-#        'absolute-paths'.
-##
-{ 'type': 'BlockdevSnapshot',
-  'data': { '*device': 'str', '*node-name': 'str',
-            'snapshot-file': 'str', '*snapshot-node-name': 'str',
-            '*format': 'str', '*mode': 'NewImageMode' } }
-
-##
 # @BlockdevSnapshotInternal
 #
 # @device: the name of the device to generate the snapshot from
@@ -1834,48 +1217,6 @@
   'data': { 'device': 'str', 'name': 'str' } }
 
 ##
-# @DriveBackup
-#
-# @device: the name of the device which should be copied.
-#
-# @target: the target of the new image. If the file exists, or if it
-#          is a device, the existing file/device will be used as the new
-#          destination.  If it does not exist, a new file will be created.
-#
-# @format: #optional the format of the new destination, default is to
-#          probe if @mode is 'existing', else the format of the source
-#
-# @sync: what parts of the disk image should be copied to the destination
-#        (all the disk, only the sectors allocated in the topmost image, or
-#        only new I/O).
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-#        'absolute-paths'.
-#
-# @speed: #optional the maximum speed, in bytes per second
-#
-# @on-source-error: #optional the action to take on an error on the source,
-#                   default 'report'.  'stop' and 'enospc' can only be used
-#                   if the block device supports io-status (see BlockInfo).
-#
-# @on-target-error: #optional the action to take on an error on the target,
-#                   default 'report' (no limitations, since this applies to
-#                   a different block device than @device).
-#
-# Note that @on-source-error and @on-target-error only affect background I/O.
-# If an error occurs during a guest write request, the device's rerror/werror
-# actions will be used.
-#
-# Since: 1.6
-##
-{ 'type': 'DriveBackup',
-  'data': { 'device': 'str', 'target': 'str', '*format': 'str',
-            'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
-            '*speed': 'int',
-            '*on-source-error': 'BlockdevOnError',
-            '*on-target-error': 'BlockdevOnError' } }
-
-##
 # @Abort
 #
 # This action can be used to test transaction failure.
@@ -1922,21 +1263,6 @@
   'data': { 'actions': [ 'TransactionAction' ] } }
 
 ##
-# @blockdev-snapshot-sync
-#
-# Generates a synchronous snapshot of a block device.
-#
-# For the arguments, see the documentation of BlockdevSnapshot.
-#
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#
-# Since 0.14.0
-##
-{ 'command': 'blockdev-snapshot-sync',
-  'data': 'BlockdevSnapshot' }
-
-##
 # @blockdev-snapshot-internal-sync
 #
 # Synchronously take an internal snapshot of a block device, when the format
@@ -1994,145 +1320,22 @@
 #
 # Returns: the output of the command as a string
 #
-# Since: 0.14.0
-#
-# Notes: This command only exists as a stop-gap.  Its use is highly
-#        discouraged.  The semantics of this command are not guaranteed.
-#
-#        Known limitations:
-#
-#        o This command is stateless, this means that commands that depend
-#          on state information (such as getfd) might not work
-#
-#       o Commands that prompt the user for data (eg. 'cont' when the block
-#         device is encrypted) don't currently work
-##
-{ 'command': 'human-monitor-command',
-  'data': {'command-line': 'str', '*cpu-index': 'int'},
-  'returns': 'str' }
-
-##
-# @block-commit
-#
-# Live commit of data from overlay image nodes into backing nodes - i.e.,
-# writes data between 'top' and 'base' into 'base'.
-#
-# @device:  the name of the device
-#
-# @base:   #optional The file name of the backing image to write data into.
-#                    If not specified, this is the deepest backing image
-#
-# @top:              The file name of the backing image within the image chain,
-#                    which contains the topmost data to be committed down.
-#
-#                    If top == base, that is an error.
-#                    If top == active, the job will not be completed by itself,
-#                    user needs to complete the job with the block-job-complete
-#                    command after getting the ready event. (Since 2.0)
-#
-#                    If the base image is smaller than top, then the base image
-#                    will be resized to be the same size as top.  If top is
-#                    smaller than the base image, the base will not be
-#                    truncated.  If you want the base image size to match the
-#                    size of the smaller top, you can safely truncate it
-#                    yourself once the commit operation successfully completes.
-#
-#
-# @speed:  #optional the maximum speed, in bytes per second
-#
-# Returns: Nothing on success
-#          If commit or stream is already active on this device, DeviceInUse
-#          If @device does not exist, DeviceNotFound
-#          If image commit is not supported by this device, NotSupported
-#          If @base or @top is invalid, a generic error is returned
-#          If @speed is invalid, InvalidParameter
-#
-# Since: 1.3
-#
-##
-{ 'command': 'block-commit',
-  'data': { 'device': 'str', '*base': 'str', 'top': 'str',
-            '*speed': 'int' } }
-
-##
-# @drive-backup
-#
-# Start a point-in-time copy of a block device to a new destination.  The
-# status of ongoing drive-backup operations can be checked with
-# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
-# The operation can be stopped before it has completed using the
-# block-job-cancel command.
-#
-# For the arguments, see the documentation of DriveBackup.
-#
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#
-# Since 1.6
-##
-{ 'command': 'drive-backup', 'data': 'DriveBackup' }
-
-##
-# @query-named-block-nodes
-#
-# Get the named block driver list
-#
-# Returns: the list of BlockDeviceInfo
-#
-# Since 2.0
-##
-{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
-
-##
-# @drive-mirror
-#
-# Start mirroring a block device's writes to a new destination.
-#
-# @device:  the name of the device whose writes should be mirrored.
-#
-# @target: the target of the new image. If the file exists, or if it
-#          is a device, the existing file/device will be used as the new
-#          destination.  If it does not exist, a new file will be created.
-#
-# @format: #optional the format of the new destination, default is to
-#          probe if @mode is 'existing', else the format of the source
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-#        'absolute-paths'.
-#
-# @speed:  #optional the maximum speed, in bytes per second
-#
-# @sync: what parts of the disk image should be copied to the destination
-#        (all the disk, only the sectors allocated in the topmost image, or
-#        only new I/O).
-#
-# @granularity: #optional granularity of the dirty bitmap, default is 64K
-#               if the image format doesn't have clusters, 4K if the clusters
-#               are smaller than that, else the cluster size.  Must be a
-#               power of 2 between 512 and 64M (since 1.4).
-#
-# @buf-size: #optional maximum amount of data in flight from source to
-#            target (since 1.4).
+# Since: 0.14.0
 #
-# @on-source-error: #optional the action to take on an error on the source,
-#                   default 'report'.  'stop' and 'enospc' can only be used
-#                   if the block device supports io-status (see BlockInfo).
+# Notes: This command only exists as a stop-gap.  Its use is highly
+#        discouraged.  The semantics of this command are not guaranteed.
 #
-# @on-target-error: #optional the action to take on an error on the target,
-#                   default 'report' (no limitations, since this applies to
-#                   a different block device than @device).
+#        Known limitations:
 #
-# Returns: nothing on success
-#          If @device is not a valid block device, DeviceNotFound
+#        o This command is stateless, this means that commands that depend
+#          on state information (such as getfd) might not work
 #
-# Since 1.3
+#       o Commands that prompt the user for data (eg. 'cont' when the block
+#         device is encrypted) don't currently work
 ##
-{ 'command': 'drive-mirror',
-  'data': { 'device': 'str', 'target': 'str', '*format': 'str',
-            'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
-            '*speed': 'int', '*granularity': 'uint32',
-            '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
-            '*on-target-error': 'BlockdevOnError' } }
+{ 'command': 'human-monitor-command',
+  'data': {'command-line': 'str', '*cpu-index': 'int'},
+  'returns': 'str' }
 
 ##
 # @migrate_cancel
@@ -2418,211 +1621,6 @@
   'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
 
 ##
-# @block_set_io_throttle:
-#
-# Change I/O throttle limits for a block drive.
-#
-# @device: The name of the device
-#
-# @bps: total throughput limit in bytes per second
-#
-# @bps_rd: read throughput limit in bytes per second
-#
-# @bps_wr: write throughput limit in bytes per second
-#
-# @iops: total I/O operations per second
-#
-# @ops_rd: read I/O operations per second
-#
-# @iops_wr: write I/O operations per second
-#
-# @bps_max: #optional total max in bytes (Since 1.7)
-#
-# @bps_rd_max: #optional read max in bytes (Since 1.7)
-#
-# @bps_wr_max: #optional write max in bytes (Since 1.7)
-#
-# @iops_max: #optional total I/O operations max (Since 1.7)
-#
-# @iops_rd_max: #optional read I/O operations max (Since 1.7)
-#
-# @iops_wr_max: #optional write I/O operations max (Since 1.7)
-#
-# @iops_size: #optional an I/O size in bytes (Since 1.7)
-#
-# Returns: Nothing on success
-#          If @device is not a valid block device, DeviceNotFound
-#
-# Since: 1.1
-##
-{ 'command': 'block_set_io_throttle',
-  'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
-            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
-            '*bps_max': 'int', '*bps_rd_max': 'int',
-            '*bps_wr_max': 'int', '*iops_max': 'int',
-            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
-            '*iops_size': 'int' } }
-
-##
-# @block-stream:
-#
-# Copy data from a backing file into a block device.
-#
-# The block streaming operation is performed in the background until the entire
-# backing file has been copied.  This command returns immediately once 
streaming
-# has started.  The status of ongoing block streaming operations can be checked
-# with query-block-jobs.  The operation can be stopped before it has completed
-# using the block-job-cancel command.
-#
-# If a base file is specified then sectors are not copied from that base file 
and
-# its backing chain.  When streaming completes the image file will have the 
base
-# file as its backing file.  This can be used to stream a subset of the backing
-# file chain instead of flattening the entire image.
-#
-# On successful completion the image file is updated to drop the backing file
-# and the BLOCK_JOB_COMPLETED event is emitted.
-#
-# @device: the device name
-#
-# @base:   #optional the common backing file name
-#
-# @speed:  #optional the maximum speed, in bytes per second
-#
-# @on-error: #optional the action to take on an error (default report).
-#            'stop' and 'enospc' can only be used if the block device
-#            supports io-status (see BlockInfo).  Since 1.3.
-#
-# Returns: Nothing on success
-#          If @device does not exist, DeviceNotFound
-#
-# Since: 1.1
-##
-{ 'command': 'block-stream',
-  'data': { 'device': 'str', '*base': 'str', '*speed': 'int',
-            '*on-error': 'BlockdevOnError' } }
-
-##
-# @block-job-set-speed:
-#
-# Set maximum speed for a background block operation.
-#
-# This command can only be issued when there is an active block job.
-#
-# Throttling can be disabled by setting the speed to 0.
-#
-# @device: the device name
-#
-# @speed:  the maximum speed, in bytes per second, or 0 for unlimited.
-#          Defaults to 0.
-#
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
-#
-# Since: 1.1
-##
-{ 'command': 'block-job-set-speed',
-  'data': { 'device': 'str', 'speed': 'int' } }
-
-##
-# @block-job-cancel:
-#
-# Stop an active background block operation.
-#
-# This command returns immediately after marking the active background block
-# operation for cancellation.  It is an error to call this command if no
-# operation is in progress.
-#
-# The operation will cancel as soon as possible and then emit the
-# BLOCK_JOB_CANCELLED event.  Before that happens the job is still visible when
-# enumerated using query-block-jobs.
-#
-# For streaming, the image file retains its backing file unless the streaming
-# operation happens to complete just as it is being cancelled.  A new streaming
-# operation can be started at a later time to finish copying all data from the
-# backing file.
-#
-# @device: the device name
-#
-# @force: #optional whether to allow cancellation of a paused job (default
-#         false).  Since 1.3.
-#
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
-#
-# Since: 1.1
-##
-{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } 
}
-
-##
-# @block-job-pause:
-#
-# Pause an active background block operation.
-#
-# This command returns immediately after marking the active background block
-# operation for pausing.  It is an error to call this command if no
-# operation is in progress.  Pausing an already paused job has no cumulative
-# effect; a single block-job-resume command will resume the job.
-#
-# The operation will pause as soon as possible.  No event is emitted when
-# the operation is actually paused.  Cancelling a paused job automatically
-# resumes it.
-#
-# @device: the device name
-#
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
-#
-# Since: 1.3
-##
-{ 'command': 'block-job-pause', 'data': { 'device': 'str' } }
-
-##
-# @block-job-resume:
-#
-# Resume an active background block operation.
-#
-# This command returns immediately after resuming a paused background block
-# operation.  It is an error to call this command if no operation is in
-# progress.  Resuming an already running job is not an error.
-#
-# This command also clears the error status of the job.
-#
-# @device: the device name
-#
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
-#
-# Since: 1.3
-##
-{ 'command': 'block-job-resume', 'data': { 'device': 'str' } }
-
-##
-# @block-job-complete:
-#
-# Manually trigger completion of an active background block operation.  This
-# is supported for drive mirroring, where it also switches the device to
-# write to the target path only.  The ability to complete is signaled with
-# a BLOCK_JOB_READY event.
-#
-# This command completes an active background block operation synchronously.
-# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
-# is not defined.  Note that if an I/O error occurs during the processing of
-# this command: 1) the command itself will fail; 2) the error will be processed
-# according to the rerror/werror arguments that were specified when starting
-# the operation.
-#
-# A cancelled or paused job cannot be completed.
-#
-# @device: the device name
-#
-# Returns: Nothing on success
-#          If no background operation is active on this device, DeviceNotActive
-#
-# Since: 1.3
-##
-{ 'command': 'block-job-complete', 'data': { 'device': 'str' } }
-
-##
 # @ObjectTypeInfo:
 #
 # This structure describes a search result from @qom-list-types
@@ -4163,410 +3161,6 @@
 { 'command': 'query-rx-filter', 'data': { '*name': 'str' },
   'returns': ['RxFilterInfo'] }
 
-
-##
-# @BlockdevDiscardOptions
-#
-# Determines how to handle discard requests.
-#
-# @ignore:      Ignore the request
-# @unmap:       Forward as an unmap request
-#
-# Since: 1.7
-##
-{ 'enum': 'BlockdevDiscardOptions',
-  'data': [ 'ignore', 'unmap' ] }
-
-##
-# @BlockdevDetectZeroesOptions
-#
-# Describes the operation mode for the automatic conversion of plain
-# zero writes by the OS to driver specific optimized zero write commands.
-#
-# @off:      Disabled (default)
-# @on:       Enabled
-# @unmap:    Enabled and even try to unmap blocks if possible. This requires
-#            also that @BlockdevDiscardOptions is set to unmap for this device.
-#
-# Since: 2.1
-##
-{ 'enum': 'BlockdevDetectZeroesOptions',
-  'data': [ 'off', 'on', 'unmap' ] }
-
-##
-# @BlockdevAioOptions
-#
-# Selects the AIO backend to handle I/O requests
-#
-# @threads:     Use qemu's thread pool
-# @native:      Use native AIO backend (only Linux and Windows)
-#
-# Since: 1.7
-##
-{ 'enum': 'BlockdevAioOptions',
-  'data': [ 'threads', 'native' ] }
-
-##
-# @BlockdevCacheOptions
-#
-# Includes cache-related options for block devices
-#
-# @writeback:   #optional enables writeback mode for any caches (default: true)
-# @direct:      #optional enables use of O_DIRECT (bypass the host page cache;
-#               default: false)
-# @no-flush:    #optional ignore any flush requests for the device (default:
-#               false)
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevCacheOptions',
-  'data': { '*writeback': 'bool',
-            '*direct': 'bool',
-            '*no-flush': 'bool' } }
-
-##
-# @BlockdevDriver
-#
-# Drivers that are supported in block device operations.
-#
-# @host_device, @host_cdrom, @host_floppy: Since 2.1
-#
-# Since: 2.0
-##
-{ 'enum': 'BlockdevDriver',
-  'data': [ 'file', 'host_device', 'host_cdrom', 'host_floppy',
-            'http', 'https', 'ftp', 'ftps', 'tftp', 'vvfat', 'blkdebug',
-            'blkverify', 'bochs', 'cloop', 'cow', 'dmg', 'parallels', 'qcow',
-            'qcow2', 'qed', 'raw', 'vdi', 'vhdx', 'vmdk', 'vpc', 'quorum' ] }
-
-##
-# @BlockdevOptionsBase
-#
-# Options that are available for all block devices, independent of the block
-# driver.
-#
-# @driver:        block driver name
-# @id:            #optional id by which the new block device can be referred 
to.
-#                 This is a required option on the top level of blockdev-add, 
and
-#                 currently not allowed on any other level.
-# @node-name:     #optional the name of a block driver state node (Since 2.0)
-# @discard:       #optional discard-related options (default: ignore)
-# @cache:         #optional cache-related options
-# @aio:           #optional AIO backend (default: threads)
-# @rerror:        #optional how to handle read errors on the device
-#                 (default: report)
-# @werror:        #optional how to handle write errors on the device
-#                 (default: enospc)
-# @read-only:     #optional whether the block device should be read-only
-#                 (default: false)
-# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1)
-#                 (default: off)
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsBase',
-  'data': { 'driver': 'BlockdevDriver',
-            '*id': 'str',
-            '*node-name': 'str',
-            '*discard': 'BlockdevDiscardOptions',
-            '*cache': 'BlockdevCacheOptions',
-            '*aio': 'BlockdevAioOptions',
-            '*rerror': 'BlockdevOnError',
-            '*werror': 'BlockdevOnError',
-            '*read-only': 'bool',
-            '*detect-zeroes': 'BlockdevDetectZeroesOptions' } }
-
-##
-# @BlockdevOptionsFile
-#
-# Driver specific block device options for the file backend and similar
-# protocols.
-#
-# @filename:    path to the image file
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsFile',
-  'data': { 'filename': 'str' } }
-
-##
-# @BlockdevOptionsVVFAT
-#
-# Driver specific block device options for the vvfat protocol.
-#
-# @dir:         directory to be exported as FAT image
-# @fat-type:    #optional FAT type: 12, 16 or 32
-# @floppy:      #optional whether to export a floppy image (true) or
-#               partitioned hard disk (false; default)
-# @rw:          #optional whether to allow write operations (default: false)
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsVVFAT',
-  'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool',
-            '*rw': 'bool' } }
-
-##
-# @BlockdevOptionsGenericFormat
-#
-# Driver specific block device options for image format that have no option
-# besides their data source.
-#
-# @file:        reference to or definition of the data source block device
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsGenericFormat',
-  'data': { 'file': 'BlockdevRef' } }
-
-##
-# @BlockdevOptionsGenericCOWFormat
-#
-# Driver specific block device options for image format that have no option
-# besides their data source and an optional backing file.
-#
-# @backing:     #optional reference to or definition of the backing file block
-#               device (if missing, taken from the image file content). It is
-#               allowed to pass an empty string here in order to disable the
-#               default backing file.
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsGenericCOWFormat',
-  'base': 'BlockdevOptionsGenericFormat',
-  'data': { '*backing': 'BlockdevRef' } }
-
-##
-# @BlockdevOptionsQcow2
-#
-# Driver specific block device options for qcow2.
-#
-# @lazy-refcounts:        #optional whether to enable the lazy refcounts
-#                         feature (default is taken from the image file)
-#
-# @pass-discard-request:  #optional whether discard requests to the qcow2
-#                         device should be forwarded to the data source
-#
-# @pass-discard-snapshot: #optional whether discard requests for the data 
source
-#                         should be issued when a snapshot operation (e.g.
-#                         deleting a snapshot) frees clusters in the qcow2 file
-#
-# @pass-discard-other:    #optional whether discard requests for the data 
source
-#                         should be issued on other occasions where a cluster
-#                         gets freed
-#
-# Since: 1.7
-##
-{ 'type': 'BlockdevOptionsQcow2',
-  'base': 'BlockdevOptionsGenericCOWFormat',
-  'data': { '*lazy-refcounts': 'bool',
-            '*pass-discard-request': 'bool',
-            '*pass-discard-snapshot': 'bool',
-            '*pass-discard-other': 'bool' } }
-
-##
-# @BlkdebugEvent
-#
-# Trigger events supported by blkdebug.
-##
-{ 'enum': 'BlkdebugEvent',
-  'data': [ 'l1_update', 'l1_grow.alloc_table', 'l1_grow.write_table',
-            'l1_grow.activate_table', 'l2_load', 'l2_update',
-            'l2_update_compressed', 'l2_alloc.cow_read', 'l2_alloc.write',
-            'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio',
-            'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read',
-            'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update',
-            'refblock_load', 'refblock_update', 'refblock_update_part',
-            'refblock_alloc', 'refblock_alloc.hookup', 'refblock_alloc.write',
-            'refblock_alloc.write_blocks', 'refblock_alloc.write_table',
-            'refblock_alloc.switch_table', 'cluster_alloc',
-            'cluster_alloc_bytes', 'cluster_free', 'flush_to_os',
-            'flush_to_disk' ] }
-
-##
-# @BlkdebugInjectErrorOptions
-#
-# Describes a single error injection for blkdebug.
-#
-# @event:       trigger event
-#
-# @state:       #optional the state identifier blkdebug needs to be in to
-#               actually trigger the event; defaults to "any"
-#
-# @errno:       #optional error identifier (errno) to be returned; defaults to
-#               EIO
-#
-# @sector:      #optional specifies the sector index which has to be affected
-#               in order to actually trigger the event; defaults to "any
-#               sector"
-#
-# @once:        #optional disables further events after this one has been
-#               triggered; defaults to false
-#
-# @immediately: #optional fail immediately; defaults to false
-#
-# Since: 2.0
-##
-{ 'type': 'BlkdebugInjectErrorOptions',
-  'data': { 'event': 'BlkdebugEvent',
-            '*state': 'int',
-            '*errno': 'int',
-            '*sector': 'int',
-            '*once': 'bool',
-            '*immediately': 'bool' } }
-
-##
-# @BlkdebugSetStateOptions
-#
-# Describes a single state-change event for blkdebug.
-#
-# @event:       trigger event
-#
-# @state:       #optional the current state identifier blkdebug needs to be in;
-#               defaults to "any"
-#
-# @new_state:   the state identifier blkdebug is supposed to assume if
-#               this event is triggered
-#
-# Since: 2.0
-##
-{ 'type': 'BlkdebugSetStateOptions',
-  'data': { 'event': 'BlkdebugEvent',
-            '*state': 'int',
-            'new_state': 'int' } }
-
-##
-# @BlockdevOptionsBlkdebug
-#
-# Driver specific block device options for blkdebug.
-#
-# @image:           underlying raw block device (or image file)
-#
-# @config:          #optional filename of the configuration file
-#
-# @align:           #optional required alignment for requests in bytes
-#
-# @inject-error:    #optional array of error injection descriptions
-#
-# @set-state:       #optional array of state-change descriptions
-#
-# Since: 2.0
-##
-{ 'type': 'BlockdevOptionsBlkdebug',
-  'data': { 'image': 'BlockdevRef',
-            '*config': 'str',
-            '*align': 'int',
-            '*inject-error': ['BlkdebugInjectErrorOptions'],
-            '*set-state': ['BlkdebugSetStateOptions'] } }
-
-##
-# @BlockdevOptionsBlkverify
-#
-# Driver specific block device options for blkverify.
-#
-# @test:    block device to be tested
-#
-# @raw:     raw image used for verification
-#
-# Since: 2.0
-##
-{ 'type': 'BlockdevOptionsBlkverify',
-  'data': { 'test': 'BlockdevRef',
-            'raw': 'BlockdevRef' } }
-
-##
-# @BlockdevOptionsQuorum
-#
-# Driver specific block device options for Quorum
-#
-# @blkverify:      #optional true if the driver must print content mismatch
-#                  set to false by default
-#
-# @children:       the children block devices to use
-#
-# @vote-threshold: the vote limit under which a read will fail
-#
-# Since: 2.0
-##
-{ 'type': 'BlockdevOptionsQuorum',
-  'data': { '*blkverify': 'bool',
-            'children': [ 'BlockdevRef' ],
-            'vote-threshold': 'int' } }
-
-##
-# @BlockdevOptions
-#
-# Options for creating a block device.
-#
-# Since: 1.7
-##
-{ 'union': 'BlockdevOptions',
-  'base': 'BlockdevOptionsBase',
-  'discriminator': 'driver',
-  'data': {
-      'file':       'BlockdevOptionsFile',
-      'host_device':'BlockdevOptionsFile',
-      'host_cdrom': 'BlockdevOptionsFile',
-      'host_floppy':'BlockdevOptionsFile',
-      'http':       'BlockdevOptionsFile',
-      'https':      'BlockdevOptionsFile',
-      'ftp':        'BlockdevOptionsFile',
-      'ftps':       'BlockdevOptionsFile',
-      'tftp':       'BlockdevOptionsFile',
-# TODO gluster: Wait for structured options
-# TODO iscsi: Wait for structured options
-# TODO nbd: Should take InetSocketAddress for 'host'?
-# TODO nfs: Wait for structured options
-# TODO rbd: Wait for structured options
-# TODO sheepdog: Wait for structured options
-# TODO ssh: Should take InetSocketAddress for 'host'?
-      'vvfat':      'BlockdevOptionsVVFAT',
-      'blkdebug':   'BlockdevOptionsBlkdebug',
-      'blkverify':  'BlockdevOptionsBlkverify',
-      'bochs':      'BlockdevOptionsGenericFormat',
-      'cloop':      'BlockdevOptionsGenericFormat',
-      'cow':        'BlockdevOptionsGenericCOWFormat',
-      'dmg':        'BlockdevOptionsGenericFormat',
-      'parallels':  'BlockdevOptionsGenericFormat',
-      'qcow':       'BlockdevOptionsGenericCOWFormat',
-      'qcow2':      'BlockdevOptionsQcow2',
-      'qed':        'BlockdevOptionsGenericCOWFormat',
-      'raw':        'BlockdevOptionsGenericFormat',
-      'vdi':        'BlockdevOptionsGenericFormat',
-      'vhdx':       'BlockdevOptionsGenericFormat',
-      'vmdk':       'BlockdevOptionsGenericCOWFormat',
-      'vpc':        'BlockdevOptionsGenericFormat',
-      'quorum':     'BlockdevOptionsQuorum'
-  } }
-
-##
-# @BlockdevRef
-#
-# Reference to a block device.
-#
-# @definition:      defines a new block device inline
-# @reference:       references the ID of an existing block device. An
-#                   empty string means that no block device should be
-#                   referenced.
-#
-# Since: 1.7
-##
-{ 'union': 'BlockdevRef',
-  'discriminator': {},
-  'data': { 'definition': 'BlockdevOptions',
-            'reference': 'str' } }
-
-##
-# @blockdev-add:
-#
-# Creates a new block device.
-#
-# @options: block device options for the new device
-#
-# Since: 1.7
-##
-{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
-
 ##
 # @InputButton
 #
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 11bd8c2..7215e48 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -4,3 +4,1409 @@
 
 # QAPI common definitions
 { 'include': 'common.json' }
+
+##
+# @SnapshotInfo
+#
+# @id: unique snapshot id
+#
+# @name: user chosen name
+#
+# @vm-state-size: size of the VM state
+#
+# @date-sec: UTC date of the snapshot in seconds
+#
+# @date-nsec: fractional part in nano seconds to be used with date-sec
+#
+# @vm-clock-sec: VM clock relative to boot in seconds
+#
+# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec
+#
+# Since: 1.3
+#
+##
+
+{ 'type': 'SnapshotInfo',
+  'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
+            'date-sec': 'int', 'date-nsec': 'int',
+            'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } }
+
+##
+# @ImageInfoSpecificQCow2:
+#
+# @compat: compatibility level
+#
+# @lazy-refcounts: #optional on or off; only valid for compat >= 1.1
+#
+# Since: 1.7
+##
+{ 'type': 'ImageInfoSpecificQCow2',
+  'data': {
+      'compat': 'str',
+      '*lazy-refcounts': 'bool'
+  } }
+
+##
+# @ImageInfoSpecificVmdk:
+#
+# @create-type: The create type of VMDK image
+#
+# @cid: Content id of image
+#
+# @parent-cid: Parent VMDK image's cid
+#
+# @extents: List of extent files
+#
+# Since: 1.7
+##
+{ 'type': 'ImageInfoSpecificVmdk',
+  'data': {
+      'create-type': 'str',
+      'cid': 'int',
+      'parent-cid': 'int',
+      'extents': ['ImageInfo']
+  } }
+
+##
+# @ImageInfoSpecific:
+#
+# A discriminated record of image format specific information structures.
+#
+# Since: 1.7
+##
+
+{ 'union': 'ImageInfoSpecific',
+  'data': {
+      'qcow2': 'ImageInfoSpecificQCow2',
+      'vmdk': 'ImageInfoSpecificVmdk'
+  } }
+
+##
+# @ImageInfo:
+#
+# Information about a QEMU image file
+#
+# @filename: name of the image file
+#
+# @format: format of the image file
+#
+# @virtual-size: maximum capacity in bytes of the image
+#
+# @actual-size: #optional actual size on disk in bytes of the image
+#
+# @dirty-flag: #optional true if image is not cleanly closed
+#
+# @cluster-size: #optional size of a cluster in bytes
+#
+# @encrypted: #optional true if the image is encrypted
+#
+# @compressed: #optional true if the image is compressed (Since 1.7)
+#
+# @backing-filename: #optional name of the backing file
+#
+# @full-backing-filename: #optional full path of the backing file
+#
+# @backing-filename-format: #optional the format of the backing file
+#
+# @snapshots: #optional list of VM snapshots
+#
+# @backing-image: #optional info of the backing image (since 1.6)
+#
+# @format-specific: #optional structure supplying additional format-specific
+# information (since 1.7)
+#
+# Since: 1.3
+#
+##
+
+{ 'type': 'ImageInfo',
+  'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
+           '*actual-size': 'int', 'virtual-size': 'int',
+           '*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool',
+           '*backing-filename': 'str', '*full-backing-filename': 'str',
+           '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
+           '*backing-image': 'ImageInfo',
+           '*format-specific': 'ImageInfoSpecific' } }
+
+##
+# @ImageCheck:
+#
+# Information about a QEMU image file check
+#
+# @filename: name of the image file checked
+#
+# @format: format of the image file checked
+#
+# @check-errors: number of unexpected errors occurred during check
+#
+# @image-end-offset: #optional offset (in bytes) where the image ends, this
+#                    field is present if the driver for the image format
+#                    supports it
+#
+# @corruptions: #optional number of corruptions found during the check if any
+#
+# @leaks: #optional number of leaks found during the check if any
+#
+# @corruptions-fixed: #optional number of corruptions fixed during the check
+#                     if any
+#
+# @leaks-fixed: #optional number of leaks fixed during the check if any
+#
+# @total-clusters: #optional total number of clusters, this field is present
+#                  if the driver for the image format supports it
+#
+# @allocated-clusters: #optional total number of allocated clusters, this
+#                      field is present if the driver for the image format
+#                      supports it
+#
+# @fragmented-clusters: #optional total number of fragmented clusters, this
+#                       field is present if the driver for the image format
+#                       supports it
+#
+# @compressed-clusters: #optional total number of compressed clusters, this
+#                       field is present if the driver for the image format
+#                       supports it
+#
+# Since: 1.4
+#
+##
+
+{ 'type': 'ImageCheck',
+  'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
+           '*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int',
+           '*corruptions-fixed': 'int', '*leaks-fixed': 'int',
+           '*total-clusters': 'int', '*allocated-clusters': 'int',
+           '*fragmented-clusters': 'int', '*compressed-clusters': 'int' } }
+
+##
+# @BlockDeviceInfo:
+#
+# Information about the backing device for a block device.
+#
+# @file: the filename of the backing device
+#
+# @node-name: #optional the name of the block driver node (Since 2.0)
+#
+# @ro: true if the backing device was open read-only
+#
+# @drv: the name of the block format used to open the backing device. As of
+#       0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
+#       'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
+#       'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow',
+#       'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
+#
+# @backing_file: #optional the name of the backing file (for copy-on-write)
+#
+# @backing_file_depth: number of files in the backing file chain (since: 1.2)
+#
+# @encrypted: true if the backing device is encrypted
+#
+# @encryption_key_missing: true if the backing device is encrypted but an
+#                          valid encryption key is missing
+#
+# @detect_zeroes: detect and optimize zero writes (Since 2.1)
+#
+# @bps: total throughput limit in bytes per second is specified
+#
+# @bps_rd: read throughput limit in bytes per second is specified
+#
+# @bps_wr: write throughput limit in bytes per second is specified
+#
+# @iops: total I/O operations per second is specified
+#
+# @iops_rd: read I/O operations per second is specified
+#
+# @iops_wr: write I/O operations per second is specified
+#
+# @image: the info of image used (since: 1.6)
+#
+# @bps_max: #optional total max in bytes (Since 1.7)
+#
+# @bps_rd_max: #optional read max in bytes (Since 1.7)
+#
+# @bps_wr_max: #optional write max in bytes (Since 1.7)
+#
+# @iops_max: #optional total I/O operations max (Since 1.7)
+#
+# @iops_rd_max: #optional read I/O operations max (Since 1.7)
+#
+# @iops_wr_max: #optional write I/O operations max (Since 1.7)
+#
+# @iops_size: #optional an I/O size in bytes (Since 1.7)
+#
+# Since: 0.14.0
+#
+##
+{ 'type': 'BlockDeviceInfo',
+  'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str',
+            '*backing_file': 'str', 'backing_file_depth': 'int',
+            'encrypted': 'bool', 'encryption_key_missing': 'bool',
+            'detect_zeroes': 'BlockdevDetectZeroesOptions',
+            'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+            'image': 'ImageInfo',
+            '*bps_max': 'int', '*bps_rd_max': 'int',
+            '*bps_wr_max': 'int', '*iops_max': 'int',
+            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
+            '*iops_size': 'int' } }
+
+##
+# @BlockDeviceIoStatus:
+#
+# An enumeration of block device I/O status.
+#
+# @ok: The last I/O operation has succeeded
+#
+# @failed: The last I/O operation has failed
+#
+# @nospace: The last I/O operation has failed due to a no-space condition
+#
+# Since: 1.0
+##
+{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
+
+##
+# @BlockDeviceMapEntry:
+#
+# Entry in the metadata map of the device (returned by "qemu-img map")
+#
+# @start: Offset in the image of the first byte described by this entry
+#         (in bytes)
+#
+# @length: Length of the range described by this entry (in bytes)
+#
+# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.)
+#         before reaching one for which the range is allocated.  The value is
+#         in the range 0 to the depth of the image chain - 1.
+#
+# @zero: the sectors in this range read as zeros
+#
+# @data: reading the image will actually read data from a file (in particular,
+#        if @offset is present this means that the sectors are not simply
+#        preallocated, but contain actual data in raw format)
+#
+# @offset: if present, the image file stores the data for this range in
+#          raw format at the given offset.
+#
+# Since 1.7
+##
+{ 'type': 'BlockDeviceMapEntry',
+  'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
+            'data': 'bool', '*offset': 'int' } }
+
+##
+# @BlockDirtyInfo:
+#
+# Block dirty bitmap information.
+#
+# @count: number of dirty bytes according to the dirty bitmap
+#
+# @granularity: granularity of the dirty bitmap in bytes (since 1.4)
+#
+# Since: 1.3
+##
+{ 'type': 'BlockDirtyInfo',
+  'data': {'count': 'int', 'granularity': 'int'} }
+
+##
+# @BlockInfo:
+#
+# Block device information.  This structure describes a virtual device and
+# the backing device associated with it.
+#
+# @device: The device name associated with the virtual device.
+#
+# @type: This field is returned only for compatibility reasons, it should
+#        not be used (always returns 'unknown')
+#
+# @removable: True if the device supports removable media.
+#
+# @locked: True if the guest has locked this device from having its media
+#          removed
+#
+# @tray_open: #optional True if the device has a tray and it is open
+#             (only present if removable is true)
+#
+# @dirty-bitmaps: #optional dirty bitmaps information (only present if the
+#                 driver has one or more dirty bitmaps) (Since 2.0)
+#
+# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
+#             supports it and the VM is configured to stop on errors
+#
+# @inserted: #optional @BlockDeviceInfo describing the device if media is
+#            present
+#
+# Since:  0.14.0
+##
+{ 'type': 'BlockInfo',
+  'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
+           'locked': 'bool', '*inserted': 'BlockDeviceInfo',
+           '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus',
+           '*dirty-bitmaps': ['BlockDirtyInfo'] } }
+
+##
+# @query-block:
+#
+# Get a list of BlockInfo for all virtual block devices.
+#
+# Returns: a list of @BlockInfo describing each virtual block device
+#
+# Since: 0.14.0
+##
+{ 'command': 'query-block', 'returns': ['BlockInfo'] }
+
+##
+# @BlockDeviceStats:
+#
+# Statistics of a virtual block device or a block backing device.
+#
+# @rd_bytes:      The number of bytes read by the device.
+#
+# @wr_bytes:      The number of bytes written by the device.
+#
+# @rd_operations: The number of read operations performed by the device.
+#
+# @wr_operations: The number of write operations performed by the device.
+#
+# @flush_operations: The number of cache flush operations performed by the
+#                    device (since 0.15.0)
+#
+# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds
+#                       (since 0.15.0).
+#
+# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0).
+#
+# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0).
+#
+# @wr_highest_offset: The offset after the greatest byte written to the
+#                     device.  The intended use of this information is for
+#                     growable sparse files (like qcow2) that are used on top
+#                     of a physical device.
+#
+# Since: 0.14.0
+##
+{ 'type': 'BlockDeviceStats',
+  'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int',
+           'wr_operations': 'int', 'flush_operations': 'int',
+           'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int',
+           'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } }
+
+##
+# @BlockStats:
+#
+# Statistics of a virtual block device or a block backing device.
+#
+# @device: #optional If the stats are for a virtual block device, the name
+#          corresponding to the virtual block device.
+#
+# @stats:  A @BlockDeviceStats for the device.
+#
+# @parent: #optional This describes the file block device if it has one.
+#
+# @backing: #optional This describes the backing block device if it has one.
+#           (Since 2.0)
+#
+# Since: 0.14.0
+##
+{ 'type': 'BlockStats',
+  'data': {'*device': 'str', 'stats': 'BlockDeviceStats',
+           '*parent': 'BlockStats',
+           '*backing': 'BlockStats'} }
+
+##
+# @query-blockstats:
+#
+# Query the @BlockStats for all virtual block devices.
+#
+# Returns: A list of @BlockStats for each virtual block devices.
+#
+# Since: 0.14.0
+##
+{ 'command': 'query-blockstats', 'returns': ['BlockStats'] }
+
+##
+# @BlockdevOnError:
+#
+# An enumeration of possible behaviors for errors on I/O operations.
+# The exact meaning depends on whether the I/O was initiated by a guest
+# or by a block job
+#
+# @report: for guest operations, report the error to the guest;
+#          for jobs, cancel the job
+#
+# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
+#          or BLOCK_JOB_ERROR)
+#
+# @enospc: same as @stop on ENOSPC, same as @report otherwise.
+#
+# @stop: for guest operations, stop the virtual machine;
+#        for jobs, pause the job
+#
+# Since: 1.3
+##
+{ 'enum': 'BlockdevOnError',
+  'data': ['report', 'ignore', 'enospc', 'stop'] }
+
+##
+# @MirrorSyncMode:
+#
+# An enumeration of possible behaviors for the initial synchronization
+# phase of storage mirroring.
+#
+# @top: copies data in the topmost image to the destination
+#
+# @full: copies data from all images to the destination
+#
+# @none: only copy data written from now on
+#
+# Since: 1.3
+##
+{ 'enum': 'MirrorSyncMode',
+  'data': ['top', 'full', 'none'] }
+
+##
+# @BlockJobType:
+#
+# Type of a block job.
+#
+# @commit: block commit job type, see "block-commit"
+#
+# @stream: block stream job type, see "block-stream"
+#
+# @mirror: drive mirror job type, see "drive-mirror"
+#
+# @backup: drive backup job type, see "drive-backup"
+#
+# Since: 1.7
+##
+{ 'enum': 'BlockJobType',
+  'data': ['commit', 'stream', 'mirror', 'backup'] }
+
+##
+# @BlockJobInfo:
+#
+# Information about a long-running block device operation.
+#
+# @type: the job type ('stream' for image streaming)
+#
+# @device: the block device name
+#
+# @len: the maximum progress value
+#
+# @busy: false if the job is known to be in a quiescent state, with
+#        no pending I/O.  Since 1.3.
+#
+# @paused: whether the job is paused or, if @busy is true, will
+#          pause itself as soon as possible.  Since 1.3.
+#
+# @offset: the current progress value
+#
+# @speed: the rate limit, bytes per second
+#
+# @io-status: the status of the job (since 1.3)
+#
+# Since: 1.1
+##
+{ 'type': 'BlockJobInfo',
+  'data': {'type': 'str', 'device': 'str', 'len': 'int',
+           'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int',
+           'io-status': 'BlockDeviceIoStatus'} }
+
+##
+# @query-block-jobs:
+#
+# Return information about long-running block device operations.
+#
+# Returns: a list of @BlockJobInfo for each active block job
+#
+# Since: 1.1
+##
+{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }
+
+##
+# @block_passwd:
+#
+# This command sets the password of a block device that has not been open
+# with a password and requires one.
+#
+# The two cases where this can happen are a block device is created through
+# QEMU's initial command line or a block device is changed through the legacy
+# @change interface.
+#
+# In the event that the block device is created through the initial command
+# line, the VM will start in the stopped state regardless of whether '-S' is
+# used.  The intention is for a management tool to query the block devices to
+# determine which ones are encrypted, set the passwords with this command, and
+# then start the guest with the @cont command.
+#
+# Either @device or @node-name must be set but not both.
+#
+# @device: #optional the name of the block backend device to set the password 
on
+#
+# @node-name: #optional graph node name to set the password on (Since 2.0)
+#
+# @password: the password to use for the device
+#
+# Returns: nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#          If @device is not encrypted, DeviceNotEncrypted
+#
+# Notes:  Not all block formats support encryption and some that do are not
+#         able to validate that a password is correct.  Disk corruption may
+#         occur if an invalid password is specified.
+#
+# Since: 0.14.0
+##
+{ 'command': 'block_passwd', 'data': {'*device': 'str',
+                                      '*node-name': 'str', 'password': 'str'} }
+
+##
+# @block_resize
+#
+# Resize a block image while a guest is running.
+#
+# Either @device or @node-name must be set but not both.
+#
+# @device: #optional the name of the device to get the image resized
+#
+# @node-name: #optional graph node name to get the image resized (Since 2.0)
+#
+# @size:  new image size in bytes
+#
+# Returns: nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#
+# Since: 0.14.0
+##
+{ 'command': 'block_resize', 'data': { '*device': 'str',
+                                       '*node-name': 'str',
+                                       'size': 'int' }}
+
+##
+# @NewImageMode
+#
+# An enumeration that tells QEMU how to set the backing file path in
+# a new image file.
+#
+# @existing: QEMU should look for an existing image file.
+#
+# @absolute-paths: QEMU should create a new image with absolute paths
+# for the backing file. If there is no backing file available, the new
+# image will not be backed either.
+#
+# Since: 1.1
+##
+{ 'enum': 'NewImageMode',
+  'data': [ 'existing', 'absolute-paths' ] }
+
+##
+# @BlockdevSnapshot
+#
+# Either @device or @node-name must be set but not both.
+#
+# @device: #optional the name of the device to generate the snapshot from.
+#
+# @node-name: #optional graph node name to generate the snapshot from (Since 
2.0)
+#
+# @snapshot-file: the target of the new image. A new file will be created.
+#
+# @snapshot-node-name: #optional the graph node name of the new image (Since 
2.0)
+#
+# @format: #optional the format of the snapshot image, default is 'qcow2'.
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+#        'absolute-paths'.
+##
+{ 'type': 'BlockdevSnapshot',
+  'data': { '*device': 'str', '*node-name': 'str',
+            'snapshot-file': 'str', '*snapshot-node-name': 'str',
+            '*format': 'str', '*mode': 'NewImageMode' } }
+
+##
+# @DriveBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the target of the new image. If the file exists, or if it
+#          is a device, the existing file/device will be used as the new
+#          destination.  If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+#          probe if @mode is 'existing', else the format of the source
+#
+# @sync: what parts of the disk image should be copied to the destination
+#        (all the disk, only the sectors allocated in the topmost image, or
+#        only new I/O).
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+#        'absolute-paths'.
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @on-source-error: #optional the action to take on an error on the source,
+#                   default 'report'.  'stop' and 'enospc' can only be used
+#                   if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+#                   default 'report' (no limitations, since this applies to
+#                   a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 1.6
+##
+{ 'type': 'DriveBackup',
+  'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+            'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+            '*speed': 'int',
+            '*on-source-error': 'BlockdevOnError',
+            '*on-target-error': 'BlockdevOnError' } }
+
+##
+# @blockdev-snapshot-sync
+#
+# Generates a synchronous snapshot of a block device.
+#
+# For the arguments, see the documentation of BlockdevSnapshot.
+#
+# Returns: nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#
+# Since 0.14.0
+##
+{ 'command': 'blockdev-snapshot-sync',
+  'data': 'BlockdevSnapshot' }
+
+##
+# @block-commit
+#
+# Live commit of data from overlay image nodes into backing nodes - i.e.,
+# writes data between 'top' and 'base' into 'base'.
+#
+# @device:  the name of the device
+#
+# @base:   #optional The file name of the backing image to write data into.
+#                    If not specified, this is the deepest backing image
+#
+# @top:              The file name of the backing image within the image chain,
+#                    which contains the topmost data to be committed down.
+#
+#                    If top == base, that is an error.
+#                    If top == active, the job will not be completed by itself,
+#                    user needs to complete the job with the block-job-complete
+#                    command after getting the ready event. (Since 2.0)
+#
+#                    If the base image is smaller than top, then the base image
+#                    will be resized to be the same size as top.  If top is
+#                    smaller than the base image, the base will not be
+#                    truncated.  If you want the base image size to match the
+#                    size of the smaller top, you can safely truncate it
+#                    yourself once the commit operation successfully completes.
+#
+#
+# @speed:  #optional the maximum speed, in bytes per second
+#
+# Returns: Nothing on success
+#          If commit or stream is already active on this device, DeviceInUse
+#          If @device does not exist, DeviceNotFound
+#          If image commit is not supported by this device, NotSupported
+#          If @base or @top is invalid, a generic error is returned
+#          If @speed is invalid, InvalidParameter
+#
+# Since: 1.3
+#
+##
+{ 'command': 'block-commit',
+  'data': { 'device': 'str', '*base': 'str', 'top': 'str',
+            '*speed': 'int' } }
+
+##
+# @drive-backup
+#
+# Start a point-in-time copy of a block device to a new destination.  The
+# status of ongoing drive-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
+# The operation can be stopped before it has completed using the
+# block-job-cancel command.
+#
+# For the arguments, see the documentation of DriveBackup.
+#
+# Returns: nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.6
+##
+{ 'command': 'drive-backup', 'data': 'DriveBackup' }
+
+##
+# @query-named-block-nodes
+#
+# Get the named block driver list
+#
+# Returns: the list of BlockDeviceInfo
+#
+# Since 2.0
+##
+{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
+
+##
+# @drive-mirror
+#
+# Start mirroring a block device's writes to a new destination.
+#
+# @device:  the name of the device whose writes should be mirrored.
+#
+# @target: the target of the new image. If the file exists, or if it
+#          is a device, the existing file/device will be used as the new
+#          destination.  If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+#          probe if @mode is 'existing', else the format of the source
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+#        'absolute-paths'.
+#
+# @speed:  #optional the maximum speed, in bytes per second
+#
+# @sync: what parts of the disk image should be copied to the destination
+#        (all the disk, only the sectors allocated in the topmost image, or
+#        only new I/O).
+#
+# @granularity: #optional granularity of the dirty bitmap, default is 64K
+#               if the image format doesn't have clusters, 4K if the clusters
+#               are smaller than that, else the cluster size.  Must be a
+#               power of 2 between 512 and 64M (since 1.4).
+#
+# @buf-size: #optional maximum amount of data in flight from source to
+#            target (since 1.4).
+#
+# @on-source-error: #optional the action to take on an error on the source,
+#                   default 'report'.  'stop' and 'enospc' can only be used
+#                   if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+#                   default 'report' (no limitations, since this applies to
+#                   a different block device than @device).
+#
+# Returns: nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.3
+##
+{ 'command': 'drive-mirror',
+  'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+            'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+            '*speed': 'int', '*granularity': 'uint32',
+            '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
+            '*on-target-error': 'BlockdevOnError' } }
+
+##
+# @block_set_io_throttle:
+#
+# Change I/O throttle limits for a block drive.
+#
+# @device: The name of the device
+#
+# @bps: total throughput limit in bytes per second
+#
+# @bps_rd: read throughput limit in bytes per second
+#
+# @bps_wr: write throughput limit in bytes per second
+#
+# @iops: total I/O operations per second
+#
+# @ops_rd: read I/O operations per second
+#
+# @iops_wr: write I/O operations per second
+#
+# @bps_max: #optional total max in bytes (Since 1.7)
+#
+# @bps_rd_max: #optional read max in bytes (Since 1.7)
+#
+# @bps_wr_max: #optional write max in bytes (Since 1.7)
+#
+# @iops_max: #optional total I/O operations max (Since 1.7)
+#
+# @iops_rd_max: #optional read I/O operations max (Since 1.7)
+#
+# @iops_wr_max: #optional write I/O operations max (Since 1.7)
+#
+# @iops_size: #optional an I/O size in bytes (Since 1.7)
+#
+# Returns: Nothing on success
+#          If @device is not a valid block device, DeviceNotFound
+#
+# Since: 1.1
+##
+{ 'command': 'block_set_io_throttle',
+  'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+            '*bps_max': 'int', '*bps_rd_max': 'int',
+            '*bps_wr_max': 'int', '*iops_max': 'int',
+            '*iops_rd_max': 'int', '*iops_wr_max': 'int',
+            '*iops_size': 'int' } }
+
+##
+# @block-stream:
+#
+# Copy data from a backing file into a block device.
+#
+# The block streaming operation is performed in the background until the entire
+# backing file has been copied.  This command returns immediately once 
streaming
+# has started.  The status of ongoing block streaming operations can be checked
+# with query-block-jobs.  The operation can be stopped before it has completed
+# using the block-job-cancel command.
+#
+# If a base file is specified then sectors are not copied from that base file 
and
+# its backing chain.  When streaming completes the image file will have the 
base
+# file as its backing file.  This can be used to stream a subset of the backing
+# file chain instead of flattening the entire image.
+#
+# On successful completion the image file is updated to drop the backing file
+# and the BLOCK_JOB_COMPLETED event is emitted.
+#
+# @device: the device name
+#
+# @base:   #optional the common backing file name
+#
+# @speed:  #optional the maximum speed, in bytes per second
+#
+# @on-error: #optional the action to take on an error (default report).
+#            'stop' and 'enospc' can only be used if the block device
+#            supports io-status (see BlockInfo).  Since 1.3.
+#
+# Returns: Nothing on success
+#          If @device does not exist, DeviceNotFound
+#
+# Since: 1.1
+##
+{ 'command': 'block-stream',
+  'data': { 'device': 'str', '*base': 'str', '*speed': 'int',
+            '*on-error': 'BlockdevOnError' } }
+
+##
+# @block-job-set-speed:
+#
+# Set maximum speed for a background block operation.
+#
+# This command can only be issued when there is an active block job.
+#
+# Throttling can be disabled by setting the speed to 0.
+#
+# @device: the device name
+#
+# @speed:  the maximum speed, in bytes per second, or 0 for unlimited.
+#          Defaults to 0.
+#
+# Returns: Nothing on success
+#          If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.1
+##
+{ 'command': 'block-job-set-speed',
+  'data': { 'device': 'str', 'speed': 'int' } }
+
+##
+# @block-job-cancel:
+#
+# Stop an active background block operation.
+#
+# This command returns immediately after marking the active background block
+# operation for cancellation.  It is an error to call this command if no
+# operation is in progress.
+#
+# The operation will cancel as soon as possible and then emit the
+# BLOCK_JOB_CANCELLED event.  Before that happens the job is still visible when
+# enumerated using query-block-jobs.
+#
+# For streaming, the image file retains its backing file unless the streaming
+# operation happens to complete just as it is being cancelled.  A new streaming
+# operation can be started at a later time to finish copying all data from the
+# backing file.
+#
+# @device: the device name
+#
+# @force: #optional whether to allow cancellation of a paused job (default
+#         false).  Since 1.3.
+#
+# Returns: Nothing on success
+#          If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.1
+##
+{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } 
}
+
+##
+# @block-job-pause:
+#
+# Pause an active background block operation.
+#
+# This command returns immediately after marking the active background block
+# operation for pausing.  It is an error to call this command if no
+# operation is in progress.  Pausing an already paused job has no cumulative
+# effect; a single block-job-resume command will resume the job.
+#
+# The operation will pause as soon as possible.  No event is emitted when
+# the operation is actually paused.  Cancelling a paused job automatically
+# resumes it.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+#          If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.3
+##
+{ 'command': 'block-job-pause', 'data': { 'device': 'str' } }
+
+##
+# @block-job-resume:
+#
+# Resume an active background block operation.
+#
+# This command returns immediately after resuming a paused background block
+# operation.  It is an error to call this command if no operation is in
+# progress.  Resuming an already running job is not an error.
+#
+# This command also clears the error status of the job.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+#          If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.3
+##
+{ 'command': 'block-job-resume', 'data': { 'device': 'str' } }
+
+##
+# @block-job-complete:
+#
+# Manually trigger completion of an active background block operation.  This
+# is supported for drive mirroring, where it also switches the device to
+# write to the target path only.  The ability to complete is signaled with
+# a BLOCK_JOB_READY event.
+#
+# This command completes an active background block operation synchronously.
+# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
+# is not defined.  Note that if an I/O error occurs during the processing of
+# this command: 1) the command itself will fail; 2) the error will be processed
+# according to the rerror/werror arguments that were specified when starting
+# the operation.
+#
+# A cancelled or paused job cannot be completed.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+#          If no background operation is active on this device, DeviceNotActive
+#
+# Since: 1.3
+##
+{ 'command': 'block-job-complete', 'data': { 'device': 'str' } }
+
+##
+# @BlockdevDiscardOptions
+#
+# Determines how to handle discard requests.
+#
+# @ignore:      Ignore the request
+# @unmap:       Forward as an unmap request
+#
+# Since: 1.7
+##
+{ 'enum': 'BlockdevDiscardOptions',
+  'data': [ 'ignore', 'unmap' ] }
+
+##
+# @BlockdevDetectZeroesOptions
+#
+# Describes the operation mode for the automatic conversion of plain
+# zero writes by the OS to driver specific optimized zero write commands.
+#
+# @off:      Disabled (default)
+# @on:       Enabled
+# @unmap:    Enabled and even try to unmap blocks if possible. This requires
+#            also that @BlockdevDiscardOptions is set to unmap for this device.
+#
+# Since: 2.1
+##
+{ 'enum': 'BlockdevDetectZeroesOptions',
+  'data': [ 'off', 'on', 'unmap' ] }
+
+##
+# @BlockdevAioOptions
+#
+# Selects the AIO backend to handle I/O requests
+#
+# @threads:     Use qemu's thread pool
+# @native:      Use native AIO backend (only Linux and Windows)
+#
+# Since: 1.7
+##
+{ 'enum': 'BlockdevAioOptions',
+  'data': [ 'threads', 'native' ] }
+
+##
+# @BlockdevCacheOptions
+#
+# Includes cache-related options for block devices
+#
+# @writeback:   #optional enables writeback mode for any caches (default: true)
+# @direct:      #optional enables use of O_DIRECT (bypass the host page cache;
+#               default: false)
+# @no-flush:    #optional ignore any flush requests for the device (default:
+#               false)
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevCacheOptions',
+  'data': { '*writeback': 'bool',
+            '*direct': 'bool',
+            '*no-flush': 'bool' } }
+
+##
+# @BlockdevDriver
+#
+# Drivers that are supported in block device operations.
+#
+# @host_device, @host_cdrom, @host_floppy: Since 2.1
+#
+# Since: 2.0
+##
+{ 'enum': 'BlockdevDriver',
+  'data': [ 'file', 'host_device', 'host_cdrom', 'host_floppy',
+            'http', 'https', 'ftp', 'ftps', 'tftp', 'vvfat', 'blkdebug',
+            'blkverify', 'bochs', 'cloop', 'cow', 'dmg', 'parallels', 'qcow',
+            'qcow2', 'qed', 'raw', 'vdi', 'vhdx', 'vmdk', 'vpc', 'quorum' ] }
+
+##
+# @BlockdevOptionsBase
+#
+# Options that are available for all block devices, independent of the block
+# driver.
+#
+# @driver:        block driver name
+# @id:            #optional id by which the new block device can be referred 
to.
+#                 This is a required option on the top level of blockdev-add, 
and
+#                 currently not allowed on any other level.
+# @node-name:     #optional the name of a block driver state node (Since 2.0)
+# @discard:       #optional discard-related options (default: ignore)
+# @cache:         #optional cache-related options
+# @aio:           #optional AIO backend (default: threads)
+# @rerror:        #optional how to handle read errors on the device
+#                 (default: report)
+# @werror:        #optional how to handle write errors on the device
+#                 (default: enospc)
+# @read-only:     #optional whether the block device should be read-only
+#                 (default: false)
+# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1)
+#                 (default: off)
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsBase',
+  'data': { 'driver': 'BlockdevDriver',
+            '*id': 'str',
+            '*node-name': 'str',
+            '*discard': 'BlockdevDiscardOptions',
+            '*cache': 'BlockdevCacheOptions',
+            '*aio': 'BlockdevAioOptions',
+            '*rerror': 'BlockdevOnError',
+            '*werror': 'BlockdevOnError',
+            '*read-only': 'bool',
+            '*detect-zeroes': 'BlockdevDetectZeroesOptions' } }
+
+##
+# @BlockdevOptionsFile
+#
+# Driver specific block device options for the file backend and similar
+# protocols.
+#
+# @filename:    path to the image file
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsFile',
+  'data': { 'filename': 'str' } }
+
+##
+# @BlockdevOptionsVVFAT
+#
+# Driver specific block device options for the vvfat protocol.
+#
+# @dir:         directory to be exported as FAT image
+# @fat-type:    #optional FAT type: 12, 16 or 32
+# @floppy:      #optional whether to export a floppy image (true) or
+#               partitioned hard disk (false; default)
+# @rw:          #optional whether to allow write operations (default: false)
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsVVFAT',
+  'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool',
+            '*rw': 'bool' } }
+
+##
+# @BlockdevOptionsGenericFormat
+#
+# Driver specific block device options for image format that have no option
+# besides their data source.
+#
+# @file:        reference to or definition of the data source block device
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsGenericFormat',
+  'data': { 'file': 'BlockdevRef' } }
+
+##
+# @BlockdevOptionsGenericCOWFormat
+#
+# Driver specific block device options for image format that have no option
+# besides their data source and an optional backing file.
+#
+# @backing:     #optional reference to or definition of the backing file block
+#               device (if missing, taken from the image file content). It is
+#               allowed to pass an empty string here in order to disable the
+#               default backing file.
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsGenericCOWFormat',
+  'base': 'BlockdevOptionsGenericFormat',
+  'data': { '*backing': 'BlockdevRef' } }
+
+##
+# @BlockdevOptionsQcow2
+#
+# Driver specific block device options for qcow2.
+#
+# @lazy-refcounts:        #optional whether to enable the lazy refcounts
+#                         feature (default is taken from the image file)
+#
+# @pass-discard-request:  #optional whether discard requests to the qcow2
+#                         device should be forwarded to the data source
+#
+# @pass-discard-snapshot: #optional whether discard requests for the data 
source
+#                         should be issued when a snapshot operation (e.g.
+#                         deleting a snapshot) frees clusters in the qcow2 file
+#
+# @pass-discard-other:    #optional whether discard requests for the data 
source
+#                         should be issued on other occasions where a cluster
+#                         gets freed
+#
+# Since: 1.7
+##
+{ 'type': 'BlockdevOptionsQcow2',
+  'base': 'BlockdevOptionsGenericCOWFormat',
+  'data': { '*lazy-refcounts': 'bool',
+            '*pass-discard-request': 'bool',
+            '*pass-discard-snapshot': 'bool',
+            '*pass-discard-other': 'bool' } }
+
+##
+# @BlkdebugEvent
+#
+# Trigger events supported by blkdebug.
+##
+{ 'enum': 'BlkdebugEvent',
+  'data': [ 'l1_update', 'l1_grow.alloc_table', 'l1_grow.write_table',
+            'l1_grow.activate_table', 'l2_load', 'l2_update',
+            'l2_update_compressed', 'l2_alloc.cow_read', 'l2_alloc.write',
+            'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio',
+            'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read',
+            'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update',
+            'refblock_load', 'refblock_update', 'refblock_update_part',
+            'refblock_alloc', 'refblock_alloc.hookup', 'refblock_alloc.write',
+            'refblock_alloc.write_blocks', 'refblock_alloc.write_table',
+            'refblock_alloc.switch_table', 'cluster_alloc',
+            'cluster_alloc_bytes', 'cluster_free', 'flush_to_os',
+            'flush_to_disk' ] }
+
+##
+# @BlkdebugInjectErrorOptions
+#
+# Describes a single error injection for blkdebug.
+#
+# @event:       trigger event
+#
+# @state:       #optional the state identifier blkdebug needs to be in to
+#               actually trigger the event; defaults to "any"
+#
+# @errno:       #optional error identifier (errno) to be returned; defaults to
+#               EIO
+#
+# @sector:      #optional specifies the sector index which has to be affected
+#               in order to actually trigger the event; defaults to "any
+#               sector"
+#
+# @once:        #optional disables further events after this one has been
+#               triggered; defaults to false
+#
+# @immediately: #optional fail immediately; defaults to false
+#
+# Since: 2.0
+##
+{ 'type': 'BlkdebugInjectErrorOptions',
+  'data': { 'event': 'BlkdebugEvent',
+            '*state': 'int',
+            '*errno': 'int',
+            '*sector': 'int',
+            '*once': 'bool',
+            '*immediately': 'bool' } }
+
+##
+# @BlkdebugSetStateOptions
+#
+# Describes a single state-change event for blkdebug.
+#
+# @event:       trigger event
+#
+# @state:       #optional the current state identifier blkdebug needs to be in;
+#               defaults to "any"
+#
+# @new_state:   the state identifier blkdebug is supposed to assume if
+#               this event is triggered
+#
+# Since: 2.0
+##
+{ 'type': 'BlkdebugSetStateOptions',
+  'data': { 'event': 'BlkdebugEvent',
+            '*state': 'int',
+            'new_state': 'int' } }
+
+##
+# @BlockdevOptionsBlkdebug
+#
+# Driver specific block device options for blkdebug.
+#
+# @image:           underlying raw block device (or image file)
+#
+# @config:          #optional filename of the configuration file
+#
+# @align:           #optional required alignment for requests in bytes
+#
+# @inject-error:    #optional array of error injection descriptions
+#
+# @set-state:       #optional array of state-change descriptions
+#
+# Since: 2.0
+##
+{ 'type': 'BlockdevOptionsBlkdebug',
+  'data': { 'image': 'BlockdevRef',
+            '*config': 'str',
+            '*align': 'int',
+            '*inject-error': ['BlkdebugInjectErrorOptions'],
+            '*set-state': ['BlkdebugSetStateOptions'] } }
+
+##
+# @BlockdevOptionsBlkverify
+#
+# Driver specific block device options for blkverify.
+#
+# @test:    block device to be tested
+#
+# @raw:     raw image used for verification
+#
+# Since: 2.0
+##
+{ 'type': 'BlockdevOptionsBlkverify',
+  'data': { 'test': 'BlockdevRef',
+            'raw': 'BlockdevRef' } }
+
+##
+# @BlockdevOptionsQuorum
+#
+# Driver specific block device options for Quorum
+#
+# @blkverify:      #optional true if the driver must print content mismatch
+#                  set to false by default
+#
+# @children:       the children block devices to use
+#
+# @vote-threshold: the vote limit under which a read will fail
+#
+# Since: 2.0
+##
+{ 'type': 'BlockdevOptionsQuorum',
+  'data': { '*blkverify': 'bool',
+            'children': [ 'BlockdevRef' ],
+            'vote-threshold': 'int' } }
+
+##
+# @BlockdevOptions
+#
+# Options for creating a block device.
+#
+# Since: 1.7
+##
+{ 'union': 'BlockdevOptions',
+  'base': 'BlockdevOptionsBase',
+  'discriminator': 'driver',
+  'data': {
+      'file':       'BlockdevOptionsFile',
+      'host_device':'BlockdevOptionsFile',
+      'host_cdrom': 'BlockdevOptionsFile',
+      'host_floppy':'BlockdevOptionsFile',
+      'http':       'BlockdevOptionsFile',
+      'https':      'BlockdevOptionsFile',
+      'ftp':        'BlockdevOptionsFile',
+      'ftps':       'BlockdevOptionsFile',
+      'tftp':       'BlockdevOptionsFile',
+# TODO gluster: Wait for structured options
+# TODO iscsi: Wait for structured options
+# TODO nbd: Should take InetSocketAddress for 'host'?
+# TODO nfs: Wait for structured options
+# TODO rbd: Wait for structured options
+# TODO sheepdog: Wait for structured options
+# TODO ssh: Should take InetSocketAddress for 'host'?
+      'vvfat':      'BlockdevOptionsVVFAT',
+      'blkdebug':   'BlockdevOptionsBlkdebug',
+      'blkverify':  'BlockdevOptionsBlkverify',
+      'bochs':      'BlockdevOptionsGenericFormat',
+      'cloop':      'BlockdevOptionsGenericFormat',
+      'cow':        'BlockdevOptionsGenericCOWFormat',
+      'dmg':        'BlockdevOptionsGenericFormat',
+      'parallels':  'BlockdevOptionsGenericFormat',
+      'qcow':       'BlockdevOptionsGenericCOWFormat',
+      'qcow2':      'BlockdevOptionsQcow2',
+      'qed':        'BlockdevOptionsGenericCOWFormat',
+      'raw':        'BlockdevOptionsGenericFormat',
+      'vdi':        'BlockdevOptionsGenericFormat',
+      'vhdx':       'BlockdevOptionsGenericFormat',
+      'vmdk':       'BlockdevOptionsGenericCOWFormat',
+      'vpc':        'BlockdevOptionsGenericFormat',
+      'quorum':     'BlockdevOptionsQuorum'
+  } }
+
+##
+# @BlockdevRef
+#
+# Reference to a block device.
+#
+# @definition:      defines a new block device inline
+# @reference:       references the ID of an existing block device. An
+#                   empty string means that no block device should be
+#                   referenced.
+#
+# Since: 1.7
+##
+{ 'union': 'BlockdevRef',
+  'discriminator': {},
+  'data': { 'definition': 'BlockdevOptions',
+            'reference': 'str' } }
+
+##
+# @blockdev-add:
+#
+# Creates a new block device.
+#
+# @options: block device options for the new device
+#
+# Since: 1.7
+##
+{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
+
-- 
1.9.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]